Archivio

Agilent 1100/MSD 1956

Seriennummer: 018589
Stato: Archived Product?The unit is no longer available.
Spedizione:
Descrizione:
siehe Storeview
Maggiori Informazioni
Objektnummer B00018589
Seriennummer 018589
Nome oggetto Agilent 1100/MSD 1956
Stato Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Firma:              Agilent

Modell:                         1100 LC/MSD SL

Kommentar:     Dokumente dt./engl.

Vorstellung des Vakuumentgasers

Der Vakuumentgaser besteht aus einem 4-Kanal Vakuumbehälter mit 4 röhrenförmigen Kunststoffmembranen und einer Vakuumpumpe. Wird der Vakuumentgaser eingeschaltet, so schaltet die eingebaute Steuerung die Vakuumpumpe ein und diese erzeugt ein Vakuum im Vakuumbehälter. Das Vakuum wird mit einem Vakuumsensor überwacht. Der Vakuumentgaser hält das Vakuum durch ein- und ausschalten der Pumpe, in Abhängigkeit vom Sensorsignal, aufrecht.

Die LC-Pumpe saugt dabei die Lösungsmittel aus den Vorratsflaschen durch die speziellen Kunststoffmembranen im Vakuumbehälter. Bei der Passage der Lösungsmittel durch die Vakuumleitung diffundieren die im Lösungsmittel gelösten Gase durch die Membran in den Vakuumbehälter. Die Lösungsmittel werden dabei nahezu vollständig entgast, wenn sie den Ausgang des Vakuumentgasers erreichen.

Physikalische Spezifikationen

Typ

Spezifikation

Kommentar

Gewicht

7 kg

Abmessungen

(Breite x Tiefe x Höhe)

345 x 435 x 80 mm

(13.5 x 17 x 3.1 Zoll)

Netzstrom

100-120 oder 220 - 240 V, ± 10 %

über einen weiten Bereich

Netzfrequenz

50 oder 60 Hz, ± 5 %

Leistungsaufnahme

30W

Maximum

Zulässige Umgebungstemperatur

0 - 55 °C (32 - 131 °F)

Unzulässige Umgebungstemperatur

-40 - 70 °C (-4 - 158 °F)

Feuchtigkeit

<95 %, bei 25-40 °C (77 -104 °F)

nicht kondensierend

Zulässige Höhe

Bis zu 2000 m (6500 ft)

Unzulässige Höhe

Bis zu 4600 m (14950 ft)

zur Aufbewahrung

Sicherheitsstandards: IEC, CSA, UL

Installation Kategorie II, Verunreinigungsgrad 2

Binary gradient pump:

Hydraulic System:

Two dual-pistons in series,

with proprietary servocontrolled variable stroke drive,

floating pistons and active inlet valve

Flow range:

Setpoints from 0.001 to 5.0 ml/min, in 0.001 ml/min increments

Pressure:

Operating range 0-40 Mpa (0-400 bar, 0-5880 psi)

Gradient formation:

High pressure binary mixing

Delay volume 180-480 pl (600-900 ul with mixer),

dependent on back pressure

Composition precision:

< 0.20 % SD, at 0.1 and 1.0 ml/min

Dimensions

(h x w x d):

180 x 345 x 435 mm

(7 x 13.5 x 17 inches)

Weight:

15.5 kg (341bs)

Agilent 1100 Series well-plate autosampler

Sample capacity:

2 well plates (96 and 384) plus 10 additional 2 ml vials or up to 100 vials

Injection volume:

0.1-100 pl standard injection range.

Up to 1500 PI with multiple­draw (hardware modification required)

Precision:

Typically

< 0.5% from 5-100 pl,

< 1 % from 1-5 pl

Carry over:

< 0.01 % using the following conditions:

Column : 125 x 4 mm

Hypersil ODS, 5 pm

Mobile phase : water/

acetonitrile=80/20

Flow rate : 1ml/min

Inj.vol. : 1 pl caffeine (1mg/ml), 5 µl water to test carry over

Outside wash of needle before injection : 20 sec. with water using flush port

Agilent 1100 Series LC/MSD System

The Agilent 1100 Series LC/MSD is a benchtop Mass Selective Detector for the Agilent 1100 Series LC that gives laboratories the powerful mass spectral information and the exceptional ease of use needed to improve laboratory throughput.

With the latest in usability, productivity, and performance, the Agilent LC/MSD helps laboratories support faster product development cycles and improve the quality of analytical results. The Agilent LC/MSD is designed specifically for the liquid chromatographer. It features easy-to-use detector hardware, stable and reliable operation, software to turn mass spectral data into useful information, and complete integration with the Agilent 1100 Series modules and systems for HPLC.

The Agilent LC/MSD software is fully integrated with the Microsoft Windows-based Agilent 3D LC ChemStation software. Users familiar with Agilent's 3D LC ChemStation can use the system immediately. Both UV and mass spectral data are processed together using the same software tools. The Agilent ChemStation is compatible with the latest in networking technologies.

For greatest ease-of-use and highest productivity:

•     Instruments can be controlled and their operating status checked from any PC - even if it is not in the laboratory.

•     Complete web-page-ready reports can be sent directly to your desktop.

Specifications

Mass range

VL - m/z 50 - 1500

SL - m/z 50-3000

Mass accuracy

± 0.13 u within the calibrated mass range in scan mode

Mass axis stability

± 0.13 u over 8 hours

SIM sensitivity

• API-electrospray at 400 µl/min or

APCI at 1000 µl/min

• Selected ion monitoring of m/z 609.3

• Positive ionization

           Quantity         Signal-to-Noise Ratio

VL       10 pg              50:1 RMS

           reserpine         (10:1 peak-to-peak)

SL       1 pg                50:1 RMS

           reserpine         (10:1 peak-to-peak)

Scan sensitivity

• API-electrospray at 400 µl/min or

APCI at 1000 µl/min

• Scan range m/z 100 - 650

• Extracted ion at m/z 609.3

• Positive ionization

           Quantity         Signal-to-Noise Ratio

SL       50 pg              50:1 RMS

           reserpine         (10:1 peak-to-peak)


Multiple signal acquisition

(SL model only)

Ability to cycle through four different acquisition modes on a scan-by-scan basis within a single run.

ISO 9001

The Agilent 1100 Series LC/MSD has been designed and manufactured under a quality system that has been registered to ISO 9001.

N 2 -Generator

SPECIFICATIONS FOR SINGLE UNIT MODEL:

Nitrogen purity:

95.0% - 99.5%

Atmospheric dewpoint:

-58°F; 50°C

Suspended liquid:s

None

Min./Max. operating pressure:

60/145 psig (4/10 bar)

Inlet temperature:

77°F; 25°C

Dimensions:

50" h x 16" w x 16” d;

127 cm x40 cm x40 cm

Shipping weight:

75 Ibs; 34 kg

Electrical requirements

HP Part Nu. 5183-2003:

None

HP Part Nu. 5183-2004:

100-220 volt, 50/60Hz

Gruppo prodotti: LC / MS

Non è stato trovato alcun prodotto corrispondente alla selezione.
Back to Top
part-of-labexchange-group
Search engine powered by ElasticSuite
Labprocure