Zymark Turbo VAP
Objektnummer | B00013055 |
---|---|
Numéro d'identification | 013055 |
Nom de l'objet | Zymark Turbo VAP |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
The Zymark TurboVap LV Evaporator is a microprocessor-controlled evaporator that provides simultaneous, automated concentration of multiple samples, unattended operation, convenience, and speed.
Automated
Microprocessor-control provides monitoring of the timed operation and water bath temperature. It also provides automatic gas shutoff and operational diagnostics.
Convenience
The operator is able to start a run of samples and leave it unattended. When the preset time has expired, the gas shuts Off automatically and the evaporator sounds a buzzer. The buzzer continues to beep every 30 seconds until operation is stopped.
Patented Technology
The patented "gas vortex shearing action" speeds evaporation.
Multiple Sample Processing
The evaporator uses one to five manifold rows. Each manifold has ten nozzles that extend into the tubes to supply the gas for evaporation. This allows up to 50 samples to be processed simultaneously. If you have less than 50 samples, you activate only those rows where samples are located.
Flexible
Evaporation may be paused, then stopped or resumed at any time. Time and temperature settings, and the selection of a row of tubes may be changed at any time.
Requires No Hood
The hinged cover and exhaust System save valuable hood space and permit benchtop use.
Complete With Accessories
Most of the hardware needed for installing and using the evaporator is provided. Racks and tubes are ordered separately. There are several rack sizes from which to choose. These include two types of 16 mm x 100 mm racks, two types of micro-centrifuge tube racks, two types of 15 mL conical bottom centrifuge tube racks, and racks for l0mm x 75 mm, 12 mm x 75 mm, 13 mm x 100 mm, 16 mm x 125 mm, 20 mm x 150 mm, and 10 mL conical bottom centrifuge tubes.
Specifications
Capacity: fifty tubes
Containers and Working Volumes: (using different racks)
Containers: Working Volumes
10 x 75 mm tubes up to 4 mL
12 x 75 mm tubes up to 4 mL
13 x 100 mm tubes up to 7 mL
16 x 100 mm tubes up to 12 mL
16 x 125 mm tubes up to 16 mL
20 x 150 mm tubes up to 30 mL
10 mL conical bottom tubes up to 10 mL
15 mL conical bottom tubes
up to 15 mL
15 mL volumetric
conical bottom tubes,
up to 15 mL
(compatible with the AutoTrace SPE Workstation)
1.5 - 2.0 mL micro-centrifuge tubes
(screw cap type)
1.5 to 2 mL
1.5 - 2.0 mL micro-centrifuge tubes
(flip cap type) 1.5 to 2 mL
NOTE: Full sample tubes must be evaporated with care to prevent splashing.
Typical Evaporation:
Rates: Solvent Time (min.)
Ethyl Acetate 17.5
Hexane 9
Methanol 25.5
Methylene Chloride 17
* Conditions:
10 mL of solvent evaporated to dryness at 52 °C. Methylene chloride bath temperature at 38°C.
Gas Consumption:
1 cfm per row of nozzles at 15 psi (from a source capable of supplying 60 to 100 psi.)
Water Bath Temperature Range:
ambient to 90°C
Gas Regulator and Gauge Range:
0 to 30 psi (206.9 KPa)
Dimensions:
Height: 11.9" (30.2 cm)
Width: 21.2" (53.8 cm)
Depth: 11.9" (30.2 cm)
Weight :
40.5 lbs. (18.47 Kg.) empty water bath
Time Range:
1 to 99 min. or 0.1 to 9.9 hrs. can also be set to 00 for infinite time
*** NOT for in vitro testing ***
Theory of Operation - Helical Gas Flow
The evaporator takes advantage of a patented gas vortex shearing action that maintains high evaporation rates regardless of sample height in the tubes. The helical flow sets up a vortexing action that provides for sample homogeneity and continuous rinsing of the tube wall. The vapor-laden gas exits via an unobstructed path up the center portion of the tubes and is removed by an exhaust fan to the exhaust port in the back of the unit. From the exhaust port, the exhaust duct is routed by you to a suitable, outside-vent location.
Main Features
Cover
Operation automatically begins or resumes when the cover is closed. The evaporation pauses when the water bath cover is open. After an evaporation, open the cover to prevent condensation within the unit.
Control Panel
The control panel allows you to control evaporation in one to five rows of 10 tube positions. (Samples are not required in each position.) The microprocessor constantly monitors the control panel allowing you to make changes to the panel settings at any time during the evaporation process. Yellow lights indicate the row(s) of tubes selected. The green light to the right of the START/PAUSE button is on when an evaporation is in progress and blinks when the evaporation has been paused. A STOP button on the control panel allows for termination of the evaporation process. The control panel also has two displays: one indicates time remaining; the other indicates the actual water bath temperature. These displays also provide diagnostic codes when an error is detected.
Automatic Control
The Operator sets the desired evaporation parameters for each run. After pressing the START button and closing the lid, the evaporator automatically monitors the programmed process. A buzzer sounds when the evaporation is completed.
Water Bath
Sample tubes are placed in a rack that sits in a temperature-controlled water bath. The water bath operates over a temperature range of ambient to 900C.
The TurboVap LV evaporator is not designed to cool but the water bath temperature can be brought down as much as 15C0 by using the evaporation as a cooling source. Cooling ability varies with the evaporation rate.
Use the numeric pushwheel to select the desired temperature setting.
Gas Supply
The evaporator has a gas supply input on the back of the unit. The fitting provided has an internal shutoff which allows you to disconnect the evaporator from the supply without shutting off the gas supply itself.
There is a gas regulator knob on the side of the unit and a gauge on the front panel. Use the gas regulator knob to reduce the external gas supply pressure (60 psi to 100 psi) to the 0 to 30 psi desired helical gas flow directed at each of the sample tubes.
The gas supply is routed through a stainless steel manifold to each sample tube.
Exhaust Port
Solvent vapors are removed by an exhaust fan and routed to the exhaust port on the back of the unit. You must route the venting hose from the exhaust port to a proper ventilation System venting to the outside. The TurboVap LV" s design assures that vapors are contained for you to remove from the laboratory environment.
Once the TurboVap LV is properly installed and properly vented, vapors remain contained and they are removed automatically when the system is operating properly.
Buzzer Volume Control
There is a buzzer with an adjustable volume control in the back of the unit.
Turn the knob in either direction until the desired volume is achieved.
A repeating beep indicates a completed run.
A long beep indicates interrupted operation.
A short beep indicates a recognized key input.