Zinsser Analytik Lissy SN 3241
Objektnummer | B00014482 |
---|---|
Numéro d'identification | 014482 |
Nom de l'objet | Zinsser Analytik Lissy SN 3241 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Zinsser Analytik
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
LISSY
©
Universal Pipetting System for Microliters and Milliliters
LISSY is a compact, high precision, robotic sample processor, capable of automating all precision liquid handling tasks. LISSY uses a robotic XYZ arm with four independent probes which can dispense or aspirate into various tubes, vials, microtitre plates etc on the workbench. An optional handler is available which can move plates around the workbench. Stackers are also available for storage of the plates.
Options for the LISSY include a 6 way valve, which can handle up to 6 liquids, powder dispensing, vacuum filtration, vortexing and lots more! All our systems are custom designed to meet specific requirements.
The LISSY comes with a 0.9m workbench as standard but workbench sizes of 1.2m (XL) and 2.0m (XXL) are also available.
Simple programming with a mouse
LISSY is as easy to use as a manual pipette, ue to the unique 32-bit Windows®NT software, WinLissy. Using drag and droptechniques, the user can easily design their own layouts for the workbench and protocols which can be tested in a simulation run. Additional commands can be added to switch internal and external devices on or off, e.g. valves, shakers, alarms and screen messages.
Integrated Safety
Winlissy® automatically calculates optimum parameters in the protocol e.g. airgaps and dispensing speeds. If necessary, the user can define their own parameters from their experience and intervention is not required once LISSY has been set up. During the run each individual step is documented on the screen in a logfile and stored after the run. In case of an interruption, e.g. a power failure, the liquid handling task can proceed without difficulty.
A flexible system
LISSY is an open system which allows the WinLissy® software to interface with any network organisation or automation structure via an RS232 port.
Precision and Accuracy
Each of LISSYs 4 sampling tips has its own dedicated precision syringe pump. The software allows the use to preoptimised operational and precision parameters.
Minimising Carry-over
LISSY offers the choice of washable or disposable sampling tips as an option. Each tip has an individual liquid level sensor to prevent over-submersion of the tip during sampling. A wash station is used to rnse washable tips inside and outside between samples or reagents.
Software
32-bit WinLissy©-Software for Windows®-NT.
WinLISSY easy to use, flexible software makes this an ideal system. All operations are easily observed, as they are graphically displayed on the computer screen. Using drag and drop techniques the users can easily design their own layouts for the workbench and test them in a simulation run. Additional commands can be added to switch internal and external devices on or off e.g. shakers, valves etc.
The software WinLISSY makes LISSY as easy to use as a manual pipette
Throughput
LISSY uses 4 sampling tips which adjust their spacing automatically when pipetting from one spatial arrangement to another, so ensuring maximum efficiency at every stage.
Safety Features
Operator Safety
A safety bar deters access to the instrument while it is working. Additionally, each movement axis of the LISSY has a feedback circuit to detect incorrect positioning. This helps to prevent accidental injury and instrument damage in the unlikely event of a collision.
Sample Tracking
The optional bar coe reading device is fully integrated, and can read any commercially available bar code format. Resulting bar codes are transferred to the final work-list output, which matches the destination position of each sample with its identified bar code.
General Specifications
Accessories and Options
· Sample tube racks for tube diameters 11-18 mm
· Standard and customised reagent racks
· Reagent stirrers (option)
· Microplate shaker, capacity 1 or 4 microplates (option)
· Tube rack shaker for 192 tubes (option)
Bar codes
Most commercially available bar codes can be read
Carry-over
· Washable tip: down to 10 -7 with sufficient tip wash
· Disposable tip: Zero
Capacity
Up to 192 tubes and 6 plates, or up to 400 tubes
Interface
RS 232
Liquid Detector
Capacitive detector. Minimum detectable volume 200µl (with 0.9% sodium chloride in atube diameter 16 mm)
Operating Conditions
· Temperature: 15 o C to 30 o C
· Relative Humidity: 10-85% at 30 o C or below
Pipetting Througput
Up to 1500 Sample transfers per hour
Precision and Accuracy
Pipetting better than 1% at 10% syringe volume, based on volume range 10 ml to 1 ml, gravimetric evaluation
Pumps
· 4x High precision syringe pumps for precision liquid handling, syringe size variable from 250 µl to 5 ml.
· 4-channel peristaltic pump for tip wash, minimum flow rate 100 ml/min
Tube sizes
· Max: Tubes OD 18 mm,
· Min: Tunes OD 8 mm
Tips
washable: special stainless steel tip with smooth surface inside and outside and PTFE coating on the outside. Other materials may be available. Disposable: conductive, volume 200 µl to 1 ml (option) Spacing from 9 to 38 mm
Volumes
Sample/reagent volumes from min. 5 µl to max. 1 ml
Power, Dimensions and Weight
· Self regulating power 90 to 260 AC, 47-63 hertz
· Weight: 38 kg
· Work space: 720 x 290 x 150 mm (WxDxH)
· Overall dimensions: 900 x 710 x 600 mm (WxDxH)