WTB Binder C02-Inkubator
Objektnummer | B00014105 |
---|---|
Numéro d'identification | 014105 |
Nom de l'objet | WTB Binder C02-Inkubator |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Firma: WTB Binder
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
1 Instrument box
2 Keys-operating with LED-display
3 Main switch
4 Operation and alarm box
5 Door contact switch
6 Outer unit door
7 Door heating
8 Inner glass door with closable measuring port
9 Inner chamber
10 Shelf holder (not visible)
11 Setting screws at the front part
12 Shelves
13 Homogenisation fan
14 CO 2 sensor
15 Permadry water basins
The inner chamber made of stainless steel 1.4571 (V4A) is deep-drawn from one piece, electropolished (suitable for pharmacy) and has no welds or inaccessible corners. The hinges and the seal of the inner glass door are glued form the outside, which is also very hepful for an easy cleaning of the inner chamber. The complete shelf holder and the perforated shelves are also made of stainless steel and are electropolished. The shelf holder offers 11 different positions for the shelves to be adjusted.
The complete shelf holder with the shelves can be adjusted via four setting screws this allows the uniform distribution of the nutrient solution in the flasks and dishes. The basins can be removed and, therefore, they can easily be cleaned.
With the heating system of the CO 2 -incubator CB 210 a hot-air auto-sterilization at 185°C can be effected, thus the whole inner chamber can be decontaminated.
Thanks to the standard safety device (TWW cl. 3.3 according to DIN 12880) the set temperature is kept in case of failure.
A highliy precise, drift-free CO 2 infrared measuring system with a homogenisation system guarantees precise and constant CO 2 concentrations via long periods of time. This creates optimum growth conditions for cultures. Both, the CO 2 measuring system and the homogenisation system can be removed from the inner chamber by hand and can be cleaned with suitable detergents.
The CO 2 gas is fed into the chamber via a fine filter (aseptic filter) with a high filtration efficiency, which also filters the smallest particels. This fine filter is easily accessible and can be exchanged by hand.
Technical data CB 210
Dimensions housing |
|
Width B mm |
740 |
Height H mm, |
1056 |
Depth T mm |
695 |
Height feet HF |
22 |
Wall clearance mm |
40 |
Depth of the instrument panel |
50 20 |
Inner chamber |
|
Width B1 m |
560 |
Height H1 mm |
750 |
Depth T1 mm |
495 |
Volume inner chamber I |
210 |
|
|
Shelves |
|
Number standard/max. |
3/11 |
Dimensions Width |
510 |
Depth |
460 |
Max. load kg per shelf inserted/pulled out |
20/10 |
|
|
Weight of unit (empty) kg |
128 |
|
|
Temperature |
|
Temperature range °C At least 8°C above ambient temperature |
60 |
Temperature variation ± °C at 37°C DIN 58945 |
0,4 |
Temperature fluctuation ≤±°C |
0,1 |
Recovery time in minutes after door was opened for 30 sec. at 37°C (Up to 96% of the end value) |
8 |
|
|
CO 2 control |
|
Setting range %CO 2 |
0-20 |
Setting accuracy %CO 2 |
0,1 |
Recovery time to 5 % CO2 in minutes after door was opened for 30 sec (Up to 98% of the end value) |
6 |
C0 2 measurement |
IR |
Connection hose nozzle for C0 2 mm |
8 |
|
|
Hummidity |
|
Relative humidity (constant % rH) |
95 |
*Recovery time to 95% rH in minutes after door was opened for 30 sec |
24 |
|
|
Nominal voltage 50/60 Hz |
|
Excess voltage category |
2 |
Nominal voltage V (± 10 %) |
230 |
Nominal power Watt |
1600 |
Energy consumption Wh/h |
140 |
Unit checked acc. to VDE 0113 |
* |
|
|
Ambient conditions |
|
Contamination level |
II |
Temperature °C Operation (min/max.) |
18/40 |
Stocking (min/max.) |
-10/50 |
Max. humidity r.H. % |
60 |