Waters HPLC
Objektnummer | B00013104 |
---|---|
Numéro d'identification | 013104 |
Nom de l'objet | Waters HPLC |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The system consists of differenet modules:
Waters 712 WISP
The 712 WISP combines precision and reliability to offer you an autosampler with exceptional value and versatility. As a standalone module, the 712 WISP provides more capabilities than other autoinjectors in its price range. Used in a Waters Powerline HPLC System (or a Waters data controlled system) it gives you added automation and enhanced documentation of system information.
The 712 allows you to program an entire carousel of samples with easy-to-use individual vial programming features:
LED display: Confirm injection parameters of set-up or during run. Injection volume: Program individual vials from 1 µl to 2000µl in 1 µl increments. Sample number: Go directly to specified sample for stat operation or to change any individual sample parameters.
Analysis time: Select sample analysis times from 1 minute to 9 hours, 59 minutes, in 1 minute increments.
Number of injections per vial: Program each sample for 1 to 9 injections. Equilibration delay: Program injection times from 1 minute to 9 hours, 59 minutes in 1 minute increments, for column reequilibration, automatic methods switching or integrator delay (useful during gradient elution chromatography).
System command: Program special routines such as standard/sample, syringe overdrawn, auto purge. Also communicates system or program errors to maximize productivity.
Specifications/Features
|
712 WISP |
Typical Precision |
< 1.0% RSD |
Linearity (1-100µl) |
> 0.99 |
Carryover |
< 0.1% |
Sample Waste (per inj.) |
None |
Minimum sample required (for 1µl inj.) |
7µls |
Random Access Programming |
No |
Injection Range |
1-2000µls |
Replicate Injections (per vial) |
1-9 |
Front Panel Control |
Yes |
Display Type |
Multisegment LED's |
Sample Carousel(s) |
4ml - 48 vial 1 ml - 96 vial |
External Event Contact |
|
Closures |
4 |
Non-Programmable |
4 |
Programmable |
0 |
Communications |
|
Output |
BCD |
Input/Output |
INTELINK, IEEE-488 |
Sample Compartment |
|
Temperature Control |
4°C-Ambient |
Advanced Sampling Routines |
|
Priority Samples |
No |
Auto Standards |
Yes |
Auto Addition |
No |
Auto Transfer |
No |
Advanced Sample Preparation |
|
Capabilities |
|
Filtration |
No |
Solid Phase Extraction |
No |
Serial Dilution |
No |
Mixing |
No |
Liquid/Liquid Extraction |
No |
Evaporation |
No |
Trace Enrichment |
No |
Power Requirement |
110-220V; 50-60Hz 35psi air |
Waters 510 HPLC Pump
Precise, reliable performance with Waters 510 HPLC Pump
The Waters 510 Pump is a high-precision HPLC pump that combines the most important aspects of performance-high precision, reliability, smooth solvent delivery, and proven performance. The 510 is the industry standard for microbore to semipreparative chromatography. The simple yet dependable design consists of dual reciprocating pistons driven by stepper-motor controlled, noncircular gears for smooth, precise delivery.
Dependable design ensures accuracy
The 510's standard flow range of 0.1 to 9.9 ml/min can be externally controlled down to 0.001 ml/min. and can operate in fully-automated isocratic mode, gradient mode, or flow programming mode. The 510's compressibility compensation circuitry automatically adjusts the motor's speed in response to changes in operating pressure, guaranteeing accurate flow delivery under all operating conditions and with all mobile phases.
The 6000 psig operating pressure lets you take advantage of the speed and efficiency of all microparticulate columns. An automatic high pressure shut off mechanism protects your columns. The mechanically activated outlet check valve and real design gives greater reliability under any operating conditions, even when using volatile solvents such as hexane und methylene chloride. Advanced seal material and mechanical design aid in precise solvent delivery und significantly extend the life of the pump. A Plunger Wash Kit is also available to extend the life of the seals when performing buffered mobile phase applications.
Drive: Positive gear drive with precision stepper-motor (12 steps/µl)
Flow Rate: 0.1 to 9.9 ml/min
with 680 Autornatic Gradient Controller 0.01 to 10.0 ml/min
with Micro Flow Control Module 0.001 to 9.9 ml/min
with 510 EF (Extended Flow) 0.22 to 22.5 ml/min
Flow Rate Precision: ±0.1 % of setting
Flow Rate Accuracy: ±1.0% of setting or 0.005 ml/min
Maximum Pressure Limit: 6000 psig (410 bars)
Pressure Meter Range: 0 to 6000 psig (0 to 410 bars)
Overpressure Limits: Continuously adjustable between 100 and 6000 psig (7 and 410 bars)
Piston Displacement Volume: 100 µI each piston (225 µI for extended flow version)
Waters CHM
Temperature Control Module Column Heater Module: Part number WATO38039
Waters TM programmable Ternperature Control System is a microprocessor controlled heating unit that maintains precise, consistent temperatures of up to four HPLC columns from ambient to 150°C (with control to a tenth of a degree). |
MANTENANCE PARTS AND SUPPLIES
Item Description Part Quantity/
Number Package
1 Inlet Tubing Assembly WAT038159 1
2 Fuses, 2.5 Amp, 115 V WAT072919 1
3 Fuses, 1.0 Amp, 115 V WAT005064 5
4 Rubber Gasket WAT038075 1
5 TCM Operator's Manual WAT038003 1
INSTRUMENT ACCESSORIES
6 Column Heater Insert, 4 mm x 10 cm WAT038120 1
7 Column Heater Insert, 4 mm x 15 cm WAT038121 1
8 Column Heater Insert, 4 mm x 25 cm WAT038122 1
9 Column Heater Insert, 4 mm x 30 cm WAT038123 1
10 Column Heater Insert, 8 mm x 25 cm WAT038124 1
11 Column Heater Insert, 8 mm x 30 cm WAT038125 1
12 Column Heater Insert, 7 mm x 30 cm WAT038126 1
13 Thin Wall C.H,I., 3.9 mm x 7.5 cm WAT019885 1
14 Thin Wall C.H.I., 3,9 mm x 15 cm WAT019886 1
15 Thin Wall C.H.I., 3.9 mm x 30 cm WAT019887 1
16 Cable, Extension, 10 ft WAT038131 1
Instrument repair parts are used by and are available only through Millipore Service. They are not listed in this catalog. The use of such parts usually requires the expertise of an authorized service and support representative to ensure maximum success.
If you fest you require parts not listed in this catalog, please contoct your local Millipore office for technicol assistance. The telephone number is listed in the back of this catalog.
Conductivity Detedtor 431
Data Module 746