Varian 8200 CX
Objektnummer | B00017758 |
---|---|
Numéro d'identification | 017758 |
Nom de l'objet | Varian 8200 CX |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
manufacturer : Varian
model : 8200 CX
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
8200 CX AutoSampler Basic Assembly
The 8200 CX AutoSampler is a low-loss low-volume autosampler that mounts an all Varian 3000 Series Gas Chromatographs equipped with the In-Board Data Handling (IBDH TM ) option.
The 8200 CX AutoSampler can be installed by you. Once you install the 8200 CX mounting plates over the GC injector nuts (either front or back mounting), and align the syringe, you can remove and remount the 8200 CX AutoSampler without the need to realign the syringe again.
The left-hand mount (storage module swings to the left) of the injector is standard for the Star 3400 CX, 3410, 3500, and the left injectors of the Star 3600 CX GC. An optional right-hand mount (storage module swings to the right) is available for right-hand injectors of the Star 3600 CX GC.
The 8200 CX AutoSampler assembly includes: Storage Module, Pneumatics Module, and
8200 CX AutoSampler Features
Compatible with 1040, 1041, 1060, 1061, 1075 (front position Star 3400 CX only), 1077, and 1093/1094 (SPI) injectors
Controlled from the GC keyboard or the GC Star Workstation
Syringe washed with up to two solvents
Syringe needle depth into vial programmable.
Syringe plunger setting set easily (Home position alignment)
Connects to the host GC with one cable
48 vial capacity carrousel
Solvent flush sample injection technique
Injects Neat, Viscous, and Volatile samples
Accommodates 100, 120, 220, and 240V power
Pneumatics Module,
Pneumatics easily accessible
Five sampling modes
8200 CX AutoSampler Specifications
Performance
Peak area: <1.0% RSD typical in standard mode for all injector types except split/splitless
injectors (1075/1077) where typical RSD is <1.5%.
Carryover: <0.05% typical with default values.
<0.01% when wash cycle is lengthened by increased viscosity factor or with multiple solvent wash.
Physical
Height: 19.5" (49.5 cm)
Width: 6.0" (15.5 cm)
Depth (including
Storage Module): 15.75 (40 cm)
Weight: 24 Ibs (10.9 kg)
Sample Capacity: 48 samples contained in 2 mL screw-cap or 2 mL crimp-top vials, standard micro-vials with internally machined conical volume or National Scientific Target Microvial inserts. These types are mixable within the sample carrousel. Wash vials not required.
Syringe: Flow-through design to allow dynamic washing; standard 10 µL syringe with Teflon®-tipped plunger.
Sampling Modes: Standard, Volatile, Neat, and User Defined
Programmable
injection Speed: 0.2 to 10 µL/sec
Programmable
residence time: 0 to 10 minutes
Programmable
hot needle time: 0 to 1.0 minute
Sample size: Programmable from 0.1 to 5.0 µL with 10 µL syringe.
Sample waste: Less than 0.1 µL per injection in the Solvent Flush Mode.
Minimum sample 2 mL vials-300 µL
volume : Micro vials-10 µL
External wash
solvent : Choice of solvent A, solvent B, or both.
Sample coding: Racks 1-4; vials 1-12
Environmental
For Optimum performance of the 8200 CXAutoSampler, check that the operating environment meets the following specifications:
Temperature: Operating: 10°C to 40°C
Storage: -20°C to 65°C
Humidity: Operating: To 80% non-condensing
Power: 90 Vac to 264 Vac operating range with four selectable voltages:
100, 120, 220, 240 Vac (±10%) Frequency: 50/60 Hz
Power Consumption (Maximum): 55 VA
The 8200 CX AutoSampler mounts over the injectors on the top cover of the Varian Series 3000 Gas Chromatographs (with the exception of the 3300). The 8200 CX AutoSampler is operated through the keypad on the front panel of the GC.
The AutoSampler is not powered through the GC but through a "power entry module" located on the rear panel of the Pneumatics Module. The main power switch, fuse(s) and voltage selection components are also located on this rear panel. The AutoSampler can be operated at 100, 120, 220, and 240 Volts, 50/60 Hz, single phase, or split phase (phase/phase) power. For the procedure to select the appropriate voltage for the 8200 CX AutoSampler.
In order for the 8200 CX AutoSampler to operate with the 3000 Series GC, the GC must be equipped with the most recent version of the 8200 CX IBDH/CPU PC Board
The 8200 CX AutoSampler is constructed of three modules: Storage Module,
Storage Module
The Storage Module consists of: 48-vial carrousel, turntable, Position Sensor Board, vial sensors, and two synchronous motors that rotate the turntable and move it in and out of the sampling position. The Storage Module is hinged to the
A power ON indicator (LED) is located an the front right side of the Storage Module. This LED lights when the power cord is properly connected and the power switch of the AutoSampler is turned ON.
Pneumatics Module
The Pneumatics Module houses: the solvent and air solenoid valves that control solvent and air to the solvent reservoirs and regulator; power transformer; main power switch, fuses, voltage selection module; and, the Controller PC Board. Gas (at 40-60 psig) enters the pressure regulator preset to 20 psi (outlet) at the factory. You should not need to further adjust the gas pressure. Gas is distributed to Tour valves (L1, L2, L3, L5) that control pressure and solvent flow from Reservoirs A and B. Solenoid valves in the pneumatics module are connected to J8 an the 8200 CX Controller PC Board.
The Injection Tower Module houses the syringe carriage and syringe mounting hardware, syringe carriage drive stepper motor, waste cup, and syringe plunger stepping motor drive assembly. The Injection Module, complete with the hinged Storage Module, bolts to the Pneumatics Module.