USF Purelab plus
Objektnummer | B00015041 |
---|---|
Numéro d'identification | 015041 |
Nom de l'objet | USF Purelab plus |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: USF
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
PURELAB Plus is an advanced post-purification polishing system developed for producing ultrapure analytical water from water already partially desalinated. Such predesalination may take place by mixed-bed deionisation, by reverse osmosis or even by traditional distillation. The analytical water produced with PURELAB Plus meets or exceeds all popular specifications for ultrapure water, including ASTM and DIN standards. In addition, the design version incorporating an integrated ultrafiltration unit reduces the pyrogen content by a factor of 10 5 .
Functional Description
PURELAB Plus
Wate enters the system with a maximum intake pressure of 14.5 psi. A solenoid valve at the water inlet protects the unit. The pump drives the feed water through the purification cartridge assembly and frorn there through a temperature-compensated conductivity cell. The dispensing rotary-knob permits precise metering of small and lange amounts of purified water.
PURELAB Plus UV
Water enters the system with a maximum intake pressure of 14.5 psi. A solenoid valve at the water inlet protects the unit. The pump drives the feed water through the UV reactor and the purification cartridge and frorn there through a temperature-compensated conductivity cell. The dispensing rotary-knob permits precise metering of small and lange amounts of purified water.
PURELAB Plus UF
Water enters the system with a maximum intake pressure of 14.5 psi. A solenoid valve at the water inlet protects the unit. The pump drives the feed water through the purification cartridge followed by the ultrafiltraton unit, and from there through a temperature-compensated conductivity cell. The dispensing rotary-knob permits precise metering of small and lange amounts of purified water.
PURELAB Plus UV/UF
Water enters the system with a maximum intake pressure of 14.5 psi. A solenoid valve at the water inlet protects the unit. The pump drives the feed water through the UV reactor and the purification cartridge followed by the ultrafiltration unit, and frorn there through a temperature-compensated conductivity cell. The dispensing rotary-knob permits precise metering of small and lange amounts of purified water.
Sanitization of the unit is very easily accomplished by placing a commercially available sanitant tablet in the sanitization chamber and controlling the process via a userfriendly nienu-type Interface. In fluidic terms, the sanitant is drained off not through the purification cartridge but instead through the drain solenoid valve.
It is possible to flush the system using manual menu commands.
Sanitization as well as manual flushing of the system can be initiated in any operating mode of the PURELAB Plus.
Spezifications
Parameters |
PURELAB Plus |
PURELAB Plus UV |
PURELAB Plus UF |
PURELAB Plus UV/UV |
Conducitvity (µS/cm) |
0,055 |
0,055 |
0,055 |
0,055 |
Resistance (MΩ.cm) |
18,2 |
18,2 |
18,2 |
18,2 |
TOC-value (ppb) (1) |
3 8 |
1 3 |
5 10 |
2 5 |
Silicid acid (ppb) |
< 1 |
< 1 |
< 1 |
< 1 |
Heavy metals (ppb) |
< 0,1 |
< 0,1 |
< 0,1 |
< 0,1 |
Bacteria (cfu/ml) |
< 1 |
< 1 |
< 1 |
< 1 |
Endotoxin conc.(EU/ml) (2) |
-- |
-- |
0,02 |
0,02 |
Ultra pure water flow rate (l/min.) (1) |
Up to 1,5 |
Up to 1,5 |
Up to 1,2 |
Up to 1,2 |
Delivery weight (kg/lb) |
17/ 37.8 |
17/ 37.8 |
18/ 40 |
18/ 40 |
Dimensions (mm) (LxBxH) |
370x340x475 |
407x340x475 |
407x340x475 |
407x340x475 |
Dimensions (inch) (LxWxH) |
15x14x19 |
16x14x19 |
16x14x19 |
16x14x19 |
All PURELAB Plus systems fulfill the requirements according to ASTM and DIN ISO 3696, starting with sample preparation and rinsing of glass items in laboratory scale up to critical laboratory analysis, setting up cell cultures, as well as In-Vitro-Studies.
Feed-water parameters |
|
PURELAB Plus ultra pure water systems must be supplied with water which has been pretreated by ion exchanger, reverse-osmosis or destillation. |
|
Feed-Water temp. |
1 25°C/ 34-77°F |
Free chlorine |
< 1 ppm |
Operating temperature |
5 40 °C/ 41-104 °F |
Intake pressure |
0.1 14.5 psi |
Connections |
NPT or for 3/8 hose |
Electrical connection |
85-264 V (AC); 47-63 Hz |