Tecator HT2
Objektnummer | B00014552 |
---|---|
Numéro d'identification | 014552 |
Nom de l'objet | Tecator HT2 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Tecator
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
Extraction is used to isolate soluble matter such as Grude fat, additives, pesticides and critical minor constituents from complex materials. Extraction analysis is traditionally based an the Soxhlet principle because of its worldwide accepted accuracy and reproducibility. However, conventional Soxhlet analysis involves tedious and time consuming manual work and explosion risks.
The patented design of the Soxtec System HT2 makes it possible to perform extractions using a wide range of solvents, in a quicker, safer and more economical way compared to Soxhlet extractions. Thus, the technique normally reduces extraction times to less than 20% of Soxhlet times and recovers 60-70% of the solvent.
High safety is ensured by external heating.
The combination of the Soxtec extraction technique and the wide range of solvent use makes the Soxtec System HT2 a flexible and powerful tool in the analysis of soluble compounds from materials such as: food, feed, soil, fibres, chemical technical products and pharmaceuticals.
Samples to be analysed are weighed into thimbles and inserted into the Extraction Unit. After solvent addition to the extraction cups, the soluble material is extracted into the solvent in a two stage process followed by a solvent recovery cycle. Finally the extraction cups are dried and weighed.
The Service Unit supplies the Extraction Unit with hot oil to achieve solvent evaporation. The tubing connecting the Extraction and Service Units, is deigned to withstand the use of hot oil, and allows constant temeratures. The lenght of the tubing permits the units to be placed in separate rooms.
The Service Unit is also equipped with an air pump for evaporation of the last traces of solvent from the extraction cups.
Function
The Soxtec System HT2 comprises:
- 1045 Extraction Unit
- 1046 Service Unit
- Extraction Cups
- Tongs for extraction cups
- Thimbles
- Thimble Adapter
THE 1045 EXTRACTION UNIT.
If the Extraction Unit, solvent extraction is done in two steps. At first the sample is immersed in the boiling solvent to dissolve most of the soluble material. In the second step the sample is raised above the solvent surface to permit an efficient washing of the sample with solvent from the condensers.
After extraction the condenser valves are closed by turning the valve knobs a quarter turn. After some minutes most of the solvent is collected in the condenser. The last residue of solvent is evaporated when the air valves are opened.
THE 1046 SERVICE UNIT
The Service Unit supplies the Extraction Unit with hot oll or water from a built in tank. The heating medium is pumped from the Service Unit to the hot plates in the Extraction Unit.
In the Service Unit there is also a pump providing an air flow for solvent evaporation.
THE EXTRACTION CUPS.
The Extraction cups are made of aluminium. Never place them an a dirty surface during the analysis. This might alter the tare weight. Before use, check that the bottom of the cups are clean and undamaged, otherwise boiling might be delayed due to bad contact.
Alternatively glass cups Gould be used (part no 1000 2291).
THE THIMBLES.
The standard sizes of thimbles are 0 26x60 mm and 0 33x80 mm (the larger thimbles is normally used for sample sizes ~~5 g). Smaller thimbles are also available (0 22 mm, length 50 mm; part no 1522 0009).
TONGS FOR THE EXTRACTION CUPS.
For inserting and removing the extraction cups the tongs (Fig. C) are used.