Starrsed MU
Objektnummer | B00014401 |
---|---|
Numéro d'identification | 014401 |
Nom de l'objet | Starrsed MU |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Starrsed
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
INSTRUMENT DESCRIPTION
The machine consists of the following:
- The basic unit wich rotating carriage (carousel), 120 glass Westergren pipettes, filling unit, measuring unit, rinsing unit and bar-code reader (optional).
- Vacuum pump.
- Printer stand.
Technical specification
basic unit:
Mains voltage 205-245 V
50/60 Hz
Power consumption Standby 60 VA
Maximum 120 VA
Fuse (20 x 5 mm) Slow blow 1 A
Dimensions Width 620 mm
Height 650 mm
Depth 580 rrm
Weight 56 kg
Minimum table size Width 1500 mm
Depth 750 mm
Vacuum pump;
Mains voltage 205-245 V
50/60 Hz
Power consumption Standby 50 VA
Maximum 800 VA
Fuses (20 x 5mm) Slow blow
Vacuum unit 10 A
Peristaltic pump 1 A
Dimensions Width 345 mm
Height 400 mm
Depth 650 mm
Capacity 13 m 3 /hour
Normal pressure 500 mBar
Noise at 1 mater <54 dB
Total weight 55 kg
Negligible running costs
StaRRsed is a fully automated Erythrocyte Sedimentation Rate analyser operating according to the Westergren method. Because the glass Westergren tubes are washed and dried after use there are no disposables hence very low running costs. StaRRsed is not to be confused with a growing number of ESR readers on the market which still require expensive citrated blood tubes and are thus costly to run.
Totally automated E.S.R.
StaRRsed accepts most makes of closed blood collection tubes with pierceable caps which ensure safety for the operator. Sample identification is either entered via the keyboard or bar code reader and results are printed out exactly 1 hour later on an adjacent printer and/or the Hospital/Lab Computer via the RS232 interface.
Wide Choice
There are three versions of StaRRsed available.
StaRRsed I which accepts citrated blood samples is the most basic.
StaRRsed II has a built in citrate dilution system and accepts EDTA blood samples, thereby eliminating the need (and expense) of a separate citrated blood collection tube, only 1,6 ml. of blood is needed and the rest of the sample is not contaminated in any way and is thus available for a cell count and for making a blood film. StaRRsed III has the saure features as StaRRsed II plus the inclusion of a 30 position Autoloader which improves the "walk-away" feature still further.
The Autolaoder also takes care of mixing the blood before each aspiration. StaRRsed III takes about 10 minutes to load 30 samples at which time the loading cassettes can be changed for the next 30 samples.
Abnormal samples reported
All StaRRseds incorporate temperature correction, that is they measure the actual ESR and calculate a temperature corrected result for 18 degrees Centigrade which can make quite a difference in the summer (high room temperature). They all have the ability to measure and record haziness above the red cell interface in a totally reproducible and objective way and they all include a saline back flush system for the blood sampling line thereby eliminating cross contamination.
StaRRsed features
Carousel holds 120 precision bore glass Westergren tubes. Sample ID via keyboard or bar code labels. Double needle for sampling blood, sampling line backflushed with sahne.
lt takes only 15 seconds to introduce a sample.
ESR automatically measured after 1 hour.
Throughput 100 samples in 1.5 hours.
Westergren tubes emptied, washed and dried with warm air for re-use automatically.
Print out of measured and temperature corrected ESR together with sample ID and sample abnormality if no clear interface detected.
Output to computer via RS232C interface.
Additional feature StaRRsed II
Automatic dilution of EDTA blood with Citrate solution in ratio of 4:1.
Additional feature StaRRsed III
30 position Autoloader (Two racks provided).
Takes 10 minutes to transfer samples to StaRRsed with mixing in between.
Microbiologically safe
All StaRRseds are provided with a large but quiet vacuum pump and waste disposal system which sits below the bench. All liquid waste is separated and pumped off into a 10 I. holding bottle containing bleach for disposal and the entire system is protected with microbiological filters.
Independent evaluation
An independent evaluation carried out on behalf of the Department of Health in the UK (MDD/92/02) concludes that StaRRsed II will pay for itself over 3 years at a throughput of only 60 ESRs a day. StaRRsed I will suit Laboratories with a lower throughput and StaRRsed III will appeal to larger Laboratories.