Spectra Physics Spectra 200
| Objektnummer | B00004507 |
|---|---|
| Numéro d'identification | 004507 |
| Nom de l'objet | Spectra Physics Spectra 200 |
| Statut | Stock unit |
Groupe de produits: Détecteurs pour CLHP (UV/VIS)
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
|
Pays |
Modalités de paiement possible |
Remarque |
|
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
|
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
|
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
|
Statut |
Condition |
Remarque |
|
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
| En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
|
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
|
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
|
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Spectra Physics
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Spectra 200 UV-Vis DETECTOR
Specifications:
Wavelength Range:
190-800 nm with standard Deuterium and Tungsten lamps.
Band Width:
6 nm
Wavelength Accuracy:
+ 1nm
Wavelength Precision:
+0.1nm
Optical Methodology:
Standard Deuterium lamp (190-365 nm) and Tungsten lamp (366-800 nm) light sources with concave hob graphic grating monochromator with double-beam optics, and provisions for purging the monochromator.
Range Selections:
0.0005 to 7.9995 AUFS, in 0.0005 AU increments on any of the recorder outputs.
Absorbance Ratio:
Displayed as ratio of absorbances (at the two selected wavelengths) per full-scabe range; plotted "as 10g of ratio of absorbances per full-scale range.
Recorder Outputs:
10 mV, 100 mV, or 1.0 V output in any combination on the four recorder outputs.
Integrator Output: .
5 V per AU (2 AU/V).
Remote Controls:
Rear panel input for Auto Zero and external RUN; RS-232-C serial Interface for computer control and/or data acquisition; DPDT relay closure for optional auto-scan valve control -and/or peak-detection driven fraction collector.
Noise : < + 1.0 x 10 -5 AU at 254 nm with 1.0 sec rise time.
< + 1.0 x 10 -5 AU at 546 nm with 1.0 sec rise time.
Drift:
<2 10-4 AU/hour after 1 hour warmup.
Zero Adjust:
Plus or minus any amount by auto zero or by manual entry.
Rise Time Filter:
Digital active filter with rise times selectable from 0.0 to 9.9 sec (divide by 2 to convert to an equivalent time constant).
Flowcells:
Pathlengths from 10 mm to 0.0 mm, cell volumes from 0 to 15 microliters, stainless steel, titanium, or Kel-Fee" contact materials, sapphire Windows. 1000 psi pressure rating for stainless steel cells, 500 psi pressure rating for Kel-F cells, 2,000 psi pressure rating for variable pathlength preparative cells; 7,000 psi pressure rating for high pressure microbore cell.
OVERVIEVV
The light sources are continuum lamps that jointly provide consistent intensity across the entire spectrum from 190 to 800 nm. Two baffles are used to minimize stray light. Wavelength selection is provided by a concave holographic grating actuated by a microprocessor-controlled stepper motor.
True double beam operation is provided by a fiberoptic beam splitter. A reference photodiode continuously monitors the light from one leg of the beam splitter. The other leg is imaged by a Jens through a sample cell onto the sample photodiode.
The photodiodes are connected to individual pre-amplifiers. The pre-amp output voltages are directly proportional to the light intensity at the photodiode active surfaces (Fig. 7.2). The output of the pre-amplifiers is sent to an analog-to-digital converter (A/D) .
The analog-to-digital (A/D) converter converts the photodiode preamplifier Outputs to provide a nineteen (19) bit digital word. Approximately 10 readings are taken per second. The digitized data are processed by the microcomputer where all filtering and ranging is carried out. The processed data are transferred to a digital-to analog (D/A) converter to provide a linear -2 V to +2 V fall scale output for each Integrator and a -1 to +1 V fall scale output for each recorder channel.
Sense lines from the Computer to the AUTO ZERO and external RUN connections provide flexibility for remote and/or automatic operation. The keyboard an the front panel allows direct Operator control over all Instrument functions.
An RS-232-C Interface allows remote control of all parameters used or-controlled by the computer. In addition, status information and either raw or processed data can be transmitted through the interface.
Light from either the Tungsten (W) or Deuterium (Dz) lamp is selected by a shutter, passed through a set of baffles, and dispersed by a concave holographic grating. After passing through a second set of baffles, the light is transmitted to a fiber optic beam Splitter creating reference and sample beams. The reference beam is directed to a photodiode, while the sample beam is focused by a lens, passed through a flowcell, and terminated upon a sample photodiode.
Detector Optical System:
