Shimadzu AA 6800
Objektnummer | B00014619 |
---|---|
Numéro d'identification | 014619 |
Nom de l'objet | Shimadzu AA 6800 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Shimadzu
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The Atomic Absorption Spectrophotometer AA-6800 incorporates two background correction functions, the D2 method (Deuterium Lamp method) and the SR method (Self-Reversal method), enabling selection of the appropriate method for the measurement sample.
The AA-6800 allows you to change the measurement mode while automatically switching the atomizer, thus enabling quick and easy switching back and forth between flame measurement and furnace measurement. In addition, wide ranging measurement operations are available, from manual Operation to automatic continuous measurement of multi-elements wich the use of an autosampler (ASC-6100). This enables selection of the appropriate combination to match the number of elements and samples to be analyzed as well as the skill of the operator.
The PC software controlline, the AA-6800 operates an the MS-Windows", and using the Wizard for parameter setting enables an operator, even an beginner of atomic absorption spectrophotometer, to make measurement conditions easily.
The GFA-6500 is the graphite furnace atomizer adopted for use with the Atomic Absorption Spectrophotometer AA-6800. With the graphite furnace connected to the Instrument, quantitative analysis of elements may be conducted using the furnace method. Following is a description of GFA-6500 features.
(1) With the incorporated high sensitivity optical-thermal sensor and the automatic temperature correction function employing current control regions, simple temperature correction and accurate temperature repeatability are achieved.
(2) Temperature control via the optical-thermal sensor is conducted from 400°C, thus making possible accurate temperature control from anhing to atomization.
(3) At sample atomization, use of the high sensitivity mode allows trace analysis of even greater sensitivity and higher precision than previously possible with live of Instruments.
(4) Precise inner gas current control is possible at each heating stage and automatic switching of the gas type allows composition of flexible temperature programs. These features make the GFA-6500 extremely effective in analyzing a wide variety of sample typen.
AA-6800F/6800G Common Specifications |
||
Spectro photometer |
Measurement Wavelength Range |
190~900nm |
Mounitng |
Aberration-corrected Czerny-Turner mount |
|
Bandwidth |
0.1, 0.2, 0.5, 2.0, 5.0 nm (6-step automatic switching) |
|
Lamp |
Number of Lamp Sockels Photometrie Method |
8 lamp sockets, 2 lamps simultanously lit (1 for warming up) High-speed seif reversal method (BGC-SR) High-speed 2-frequency simultanous measurement (BGC-D2) |
Lamp Mode |
EMISSION, NON-BGC, BGC-SR, BGC-D2, D2 |
|
Data Processing |
Software Environment Parameter Setting |
MS-Windows TM 95 Wizard Method |
Measurement Mode |
Flame continuous method, Fumace method |
|
Concentration Conversion Mode
Repeat Measurement |
Calibration Curve (selectable arnong 1st, 2nd, 3rd order function) Standard addition method/Simple Standard addition method (1st order function) Max. 10 repetitions Indication of Average, Standard deviation (SD) and Relative Standard Deviation (RSD) Exclusion of deviant value based an SD value and RSD value |
|
Baseline Correction |
Automatic baseline dritt correction using electrical double beam Signal processing (Furnace) |
|
Sensitivity Correction |
Automatic calibration curve correction System by sensitivity observation. |
|
Table Data Processing Functions Multitask |
Actual concentration calculation using Weight factor, Dilution factor, Volume factor and Correction factor. Word processor Software or the like can be used while executing measurement. |
|
Loading Parameters |
Template function |
|
Procedure/Result Display |
MRT Work Sheet (MRT: Measurement Result Table) |
|
Result Print |
Summary Report |
|
QA/QC |
Correlation factor, LCS, SPK, Sample upper limt, %RSD |
|
Power Requirements
Dimensions, Weight |
AC100, 120, 220, 230, 240V switching incorporated, 600VA, 50/60Hz Additional power for personal Computer is necessary‑ W 1080 X D550 X H460mm, 100kg (including gas controller. not including PC) |
|
|
Ambient Temperature Range |
10°C ~ 35C |
Ambient Hurt udity Range |
45% ~ 80% (less than 70% if temperature is over 30°C) |
AA-6800F Specifications |
||
Burner Unit |
Type |
Air-cooled pre-mix type |
Bunter Head |
Pure Titanium |
|
Nebulizer |
Pt-Ir capillary with Teflon orifice, Impact bead is inseparable. Fluoric acid is usable. |
|
Chamber |
Polypropylene |
|
Positioning |
Bumer/Fumace automatic switching by motor drive Automatic searching for optimum burner height |
|
Gas Controller |
Flow Rate/Pressure Control |
Automatic flow rate settin-, Automatic searching for optimum gas flow rate |
Safety Measures |
Automatic gas leak check Air-C 2 H 2 flame priority ignition Air/N 2 0 auto switching with C 2 H 2 flow rate monitor (optical Sensor) Prevents raw gas discharge Prevents usage of wrong burner head Pressure monitor to prevent flashback at abnormal pressure Safety extinction by automatic detection of momentary power failure Drain tank water level monitor to prevent flashback |
AA-680OG Specifications (GFA-6500 Specifications) |
|
Heating Temperature Range |
Ambient~3000 °C |
Heating Control Method |
Drying: Current control method Ashing/Atomizing: Optical temperature control method |
Heating Parameter settings |
Max. 20 stages Heating mode: RAMP/STEP Inner gas type: 2-line switching High sensitivity setting Furnace concentration boost cycle: Max 20 times Innen gas flow rate: 0~1.5 L/min Optimum fumace program search function |
Cooling water/Ar Consumption Power Requirements |
Cooling water: 1.0 L/min or larger Gas: Max. 3.0 L/min AC200V Max.6kVA, 50/60Hz |
Power Supply Unit, Dimension and Weight |
W42XD29XH460 (innt). 442 (Power supp1.v unit fins in space behmd 14 mit unit. Main unit width on1.v needs to be considered.) |
Optional
ASC-6100
By connecting to the Shimadzu Atomic Absorption Spectrophotometer, the ASC-6100 performs the functions as the autosampler for flame absorption measurement. Also, when G attachment ASK-6100 is mounted, the ASC-6100 can perform a wide variety of following functions automatically in the furnace quantitative measurement by linking wich the Shimadzu Atomic Absorption Spectrophotometer main unit.
(1) Sample dilution
(2) Reagent addition
(3) Mixture of samples and reagents at the mixing port
(4) Combined rinsing of mixing port
(5) Automatic dilution and re-analysis for off-scale measurements due to excessive concentration of unknown samples
(Dilution rate is automatically set. Possible dilution rate is 300 times at maximum.)
(6) Injection of high accuracy sample. Sampling amount can be changed in the unit of 1µl.
(7) Booting of sample concentration in Fumace measurement
For Flame and Furnace |
|
Control |
By RS-232C with AA |
Function |
Origin search Self diagnosis Automatic rinsing Automatic preparation Random access |
Number of sample |
8 for Reagent 60 for Sample (random access available for both) |
Sample cup |
Sample : 15ml (testing tube for Flame) or 2ml (vial for Furnace) Reagent : 20ml |
Rinne nozzle |
Discharge rinsie liquid from nozzle (for Furnace) Intake rinse liquid from nozzle (for Flame) |
Bottle for rinse liquid |
2l |
Power |
AC100V ~ 240V (auto sensing), 100VA |
Dimension Weight |
For Flame : W330 x H320 x D295mm. 7.5kg For Flame and Furnace : W430 x H320 x D360mm, 15kg |
For Furnace only |
|
Function |
Automatic dilution Automatic reagent addition |
Syringe |
250µl |
Injection volume |
2 --100µl |
Reproducibility |
1% R.S.D (20µl) |
Cary over |
Rinsing port :under 0.00001 Mixing port :under 0.00001 |
Rinsing Mixing port |
With rinse liquid With next sample |
Mixing |
In the mixing port Maximum volume for preparation: 0,6ml |
Number of reagent for addition |
Maximum 4 Number of liquids for mixing Calibration method : Maximum 5 (one sample + 4 reagents) Standard addition method : Maximum 6 (one sample + one Standard + 4 reagents) |
Auto dilute and re-analyze |
When the absorbance exceeds the range of the calibration curve: The Optimum dilution ratio is automatically set. (When it can not be calculated ,the dilution ratio is fixed at 10 times.) |