Prochrom LC50VE
Objektnummer | B00013934 |
---|---|
Numéro d'identification | 013934 |
Nom de l'objet | Prochrom LC50VE |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Prochrom
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The PROCHROM LC 50 VE 500 unit is designed for development or Pilot plant preparative chromatography. The column can be packed with up to 300 gm of packing and can purify or separate an average of 8 g of product per injection. (gm loading is dependent an the difficulty of the separation).
The design of the LC50 VE 500 is based an the "dynamic axial compression" principle. To prepare the column the user transfers a slurry (mixture of solvent and packing material) of the desired packing into the column with the piston at its lowest Position. The top flange is installed and the resin slurry is axially compressed with the movement of the piston. The piston movement is controlled by a hydraulic jack . After packing, the piston maintains pressure an the resin bed greater than the Pressure of the mobile phase flowing through the bed. Axial compression allows Small particle sizes to be packed with stable and highly efficient results.
This preparative HPLC system is equipped with a self packing column using the dynamic axial compression technology (DAC *). Any kind of packing material can be used to fill the column. The maximum length of the bed is 35 cm and the maximum running pressure 100 bar. Two versions are available : manual and fully automated. Each version integrates an the same stainless steel frame the column itself, the solvent module, the automation (for the automated version) and the detector(s).
(*) Roussel Uclaf patent.
Manual version
In addition to the column itself (internal diameter : 50 mm, piston stroke : 500 mm and maximum operating pressure : 100 bar), this manual version includes the following items mounted an ehe stainless steel frame
- a quick metallic clamp to seal the top of the column.
- a top flange equipped with a frit and a PTFE gasket (a teflon membrane can also be installed an the frit for protection against Small particles).
- a piston equipped with a frit and PTFE seals (a teflon membrane can also be installed an the frit for protection against small particles).
- a hydraulic jack
- hydraulic system to feed the jack. This system is powered by a pneumatic motor (6.2 bar compressed air needed; maximum flow rate during the compression phase 0.50 Nm3/min).
- a manual injection valve for Small samples (syringe).
- high pressure two-head solvent pump. Maximum flow rate 15 L/hr at 100 bar (220 VAC, 50 Hz).
- a manual purge valve.
- a high pressure filter (2 microns)
a pressure gauge to indicate the hydraulic oil pressure
- a pressure sensor with high and low pressure safeties
- all necessary pipes for the connection of the column.
- a waste/collection valve.
- a panel control
OPTIONS:
1 - guard column with by-pass valves.
2 - column backflush valve.
3 - recycling valve (for sample and/or solvent) 4- injection pump
5 - automation module including :
* injection pump
* 5-line fraction collector
* electronic interface boards
* 1ow pressure 3-solvent gradient maker
* control software
6 - microcomputer COMPAQ DESKPRO 286E model 20, equipped with
a microprocessor Intel 80286 at 12 MHZ, 1 Mo RAM, 20 Mo
hard disk, 5 1/4" floppy drive, VGA color monitor and LQ
500 Epson printer.
7 - 5-line fraction collector
AUTOMATIC VERSION
The automatic system is similar to the manual system previously described to which the following items have been added to allow completely automated operation (the microcomputer system and interfaces are not included in the basic automated version) :
- low pressure 3-solvent gradient maker
- injection pump
- 5-line fraction collector
- interface boards
OPTIONS:
1 - guard column with by-pass valves.
2 - column backflush valve.
3 - recycling valve (for sample and/or solvent)
4 - microcomputer COMPAQ DESKPRO 286E model 20, equipped with a microprocessor
Intel 80286 at 12 MHZ, 1 Mo RAM, 20 Mo hard disk, 5 1/4" floppy drive, VGA color monitor and LQ 500 Epson printer.
5 - 5-line fraction collector
UV DETECTOR
It is a variable wavelength UV detector (190-500 nm). The path length is adjustable between 0.5 and 3 mm and the maximum cell volume is 4.6 ul.
REFRACTIVE INDEX DETECTOR
This detector is based an the priciple of the deviation angle. The cell angle is 45 o. The cell volume is 8 uL and the maximum flow rate in the cell is 2 mL/min (a split has to be used).
RECORDER
One-way recorder type BD 40, 14 Chart speeds, 12 sensitivities from 1 mV to 5 V.
START-UP
One (1) day an-site (not including travel and daily expenses) dedicated to :
- assembly of the unit
- verification of the Installation
- demonstration