Planer Kryo 10 II
Objektnummer | B00012637 |
---|---|
Numéro d'identification | 012637 |
Nom de l'objet | Planer Kryo 10 II |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The following descripton is correspondig to Modell Kryo 10 Series II
The Kryo 560 - 16 incorporates all of the critical features expected from a high dass biological freezer. The system is specifically designed with full system safety protection. The -180 °C end temperature ensures sample integrity during transfer to storage whilst the flexibility of the system, including protocol stage transition based an sample or chamber temperature or time, is ideal for the more demanding protocols associated with the most advanced cryopreservation techniques.
The high capacity LNP4 active nitrogen pump offers both faster cooling rates and, when combined with a LAB 30 dewar, a largo reservoir offering the reassurance of an extended hold time at the protocol end temperature. The system sample capacity is sufficient for the busiest laboratory and the state of the art compact design will enhance the most modern facility. The top opening chamber, combined with a unique forced laminar ilow pattern of the coolant and cryogenic insulation, ensures even and accurate temperature control in all phases of the protocol and prevents the lid from freezing shut at cryogenic temperatures.
The MRV controller system has been created to offer multiple protocols whilst remaining simple to programme and operate. Both during and after a run it offers the widest range of displayed information, alphanumericaily and graphically via the easy view display and as a print out an the integral full view printer. Validation is a high priority and the MRV offers password controlled access an multiple user levels, time and date stamping, programme preview/verification before running and data storage for the last 10 runs for subsequent printing.
User calibration with associated hard copy is featured and PC connection compatible with our comprehensive Delta T TM software application is standard. These help protect against power failure and PC failure when running wich software. Processor or system problems are controlled and the system restarts to protect samples. For example all control and data systems are separated, the controller can be removed from the operating freezer wich no loss of programme integrity; data storage and processing are run an completely isolated electronic systems.
The Planer Kryo 560 - 16 fully featured Tissue Bank freezer for cryopreservation of Bone Marrow, Stern Cells, Skin, Cord Blood and other critical high volume samples
q Designed for freezing of samples in bags, ampoules and straws
q Controller displays demand, sample and chamber temperatures, programme stage and current temperature graphic
q Menu driven controller, simple to programme and operate
q Protocol stage trigger an sample or chamber temperature or time
q Unique forced laminar flow system ensures efficient, even cooling
q Standard operating features:
Start above ambient
Controlled heating
Dato Printing (integral printer)
Comms port for PC connection
Fast cooling rates
Multiple safety features
SPECIFICATION OVERVIEW
· Chamber volune: 16 Iitres
· Capacity: 11 x 250/500 rni bags, horizontally or vertically in chamber
· Ampoule capacity: 726 x 2 ml in basktets
· Straw capacity: 608 2 ml on canes (horizontal)
· Lower temperature limit: -180 °C
· Cooling rates: -0.01 to -50 °C/min
· Controlled heating rates: 0.01 to 10 °C/min
· System controller: MRV
SYSTEM REQUIREMENTS
5 psi or 22 psi Liquid Nitrogen Supply
TECHNICAL SPECIFICATION - Kryo 560 - 16 |
|
System Specification |
|
Range |
+30 °C to -180 °C |
Heating rate |
0.01 °C/min to 10 °C/min |
Cooling rate |
-0.01 °C/min to -50 °C/min |
Controller accuracy |
±(O 3 + 0 005 x TM) °C (where TM is the magnitute of the temperature) |
Storage temperature |
-10 °C to +50 °C |
Storage humidty |
5 % to 95 % relative humidity non-condensing |
Operating temperature |
5 °C to 40 °C |
Operating humidity |
5 % to 90 % relative humidity non-condensing |
Controller Specification |
|
Dimenstons |
80 mm high x 220 mm wide x 350 mm deep |
Weight (approx.) |
2.6 kg |
Display |
240 x 64 LCD with CCFL backlight |
Printer |
320/640 dot thermal printer |
Keypad |
20 key membrane keypad |
Programmable Cooling Rate Range |
-0.01 °C/min to -99.9 °C/min |
Number of profiles |
10 |
Steps per profile |
32 |
Number of stored runs |
10 |
Chamber Specification |
|
Weight (kg) |
23 |
Capacity (litres) |
16 |
Chamber dimenisions |
350 mm high x 230 mm wide x 230 mm deep |
0.25 ml straws |
608 horizontal or 250 vertical |
0 5 ml straws |
68 |
2 ml ampoules |
726 |
50 cc blood bags |
22 |
250 cc blood bags |
11 |
500 cc blood bags |
11 |
Power requirements (inc. MRV Controller) |
115\1~ 50/60Hz 1500VA / 230V- 50/60Hz 1500VA |
Recommendation of additional equipment |
5 psi System System Pump - LNP4-C System Dewar - MVLAB 30 22 ps System System Cylinder MVEURQCYL23OSB Phase Separator MVPHASE |
(Alternative) |
22 psi System Vacuum Jacketed Pipe Work System Phase Separator - MVPHASE |