Pharmacia HPLC
Objektnummer | B00013059 |
---|---|
Numéro d'identification | 013059 |
Nom de l'objet | Pharmacia HPLC |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Kommentar: Dokumente engl. (nur für IDNR.: 09253)
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Uvicord SII
Introduction
Pharmacia LKB Uvicord SII Code No. 18-1004-50 is a compact single beam UV-monitor with flow-through cell for monitoring the eluant from various column separations. Available wavelengths, selected by a combination of lamp and interference filter are 206, 226, 254, 280, 313, 365 and 405 nm.
Pharmacia LKB Uvicord SII is housed up in one combined optical and electronic unit. This detector simultaneously produces two absorbance outputs - one fixed at 2 AUFS and one selectable from 0.005 - 2 AUFS in 9 steps. Thus, with the selection of the appropriate absorbance range, Uvicord SII enables monitoring of both high and low concentration substances simultaneously with a dual-channel recorder.
Substances such as non-aromatic peptides, amino acids, lipids, nucleotides and certain carbohydrates have strong absorption at 206 nm whereas at higher wavelengths they show little or no absorption. Furthermore, most proteins also exhibit greater absorption at 206 nm than they do at 280 nm. By employing all fully integrated electronics and the very latest detection principles Uvicord SII performs to specification at ambient temperature and under cold room conditions.
Technical Specifications
Operating wavelengths 206, 226, 254, 280, 313, 365 and 405 nm.
Absorbance ranges 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1 and 2 AUFS.
Noise <1x10 -4 AU measured peak to peak in a dry cell.
Drift <5x10 -4 AU/h at constant temperature.
Operating temperature 0 to +30°C.
Recorder outputs 100 mV for selected absorbance range and 100 mV for fixed 2A range.
Integrator output 1 V = 2 AU.
Power consumption 20 W.
Mains Voltage 100/115/120/220/240V ±10%, 50/60 Hz.
Dimensions (LxWxH) 313 x 131 x 147 mm.
Weight 4.3 kg.
GradiFrac
Introduction
GradiFrac (Code No. 18-1993-01) from Pharmacia Biotech AB combines the functions of gradient programmer and programmable fraction collector for standard chromatography
applications. It forms the basic unit of GradiFrac System, which includes GradiFrac, Pump P-1, Monitor UV 1, Recorder REC 102, Valve IV-7, Switch Valve PSV50 and a mounting rack. Gradients are generated using a single pump and a Switch valve. Easy-to-use programming allows automatic gradient formation for preprogrammed separation methods. Up to ten methods can be stored in the instrument memory. Stored methods are retained in memory even when the power is switched off. GradiFrac can also be used in manual control mode, and manual adjustments can be made while a method is running.
GradiFrac can be programmed to collect fractions based on time, volume or drop count. Fractions can also be collected in a peak detection mode when a suitable monitor is connected. Tube racks accommodate tubes with diameter 10-18 mm and length 50-180 mm.
Technical specifications
Programming base ml or min
Programming capacity 10 separate methods, 52 breakpoints each
Memory protection EEPROM
Pump control Remote for Pump P-1 and HiLoad Pump P-50
Gradient formation Single pump and switch valve
Fraction collection
Time base 0.1-99.9 min
Volume base 0.1-99.9ml
Drop base 1-999 drops
Tube change time 0.3-0.6 s (tube rack 18 mm)
Rack capacity 95 tubes, rack 18 mm
Event mark 50 ms contact closure
Flow diverter Solenoid valve PSV-50
Monitor input range 0-10 mV, 0-100 mV, 0-1000 mV
Recorder control Controls REC 101 and REC 102
Valve control 3 outports for Solenoid Valve PSV-50 (switch valve, flow diverter, auxiliary)
Mixer 0.6 ml
Power supply 24 V Power Supply for 100-240 VAC, 50-60 Hz
Power consumption 15 W maximum
Dimensions (w x d x h) 290 x 300 x 390 mm
Weight 3.9 kg
Working temperature range: 4-40°C
Safety standard Conforms to IEC 1010-1 and UL 1262 requirements.
GradiFrac System
Recorder REC 102
Introduction
Pharmacia Biotech model REC 101 (Code No. 18-1001-42), single-channel recorder and model REC 102 (Code No. 18-1001-43), dual-channel recorder are compact recorders designed to meet the challenging demands of todays technology.
These instruments are part of the new generation of high quality, flat-bed recorders from Pharmacia Biotech which use a null balancing potentiometric system. They can accommodate a range of input voltages, offer a selection of chart speeds, and allow many functions to be remotely controlled.
The recorders have sophisticated features such as electric pen lift, grid and home functions, forward and reversed paper feed. Paper is transported at a constant velocity selected from the 14 different chart speeds in the range from 0.1 mm/min to 20 mm/s, and can be synchronized with the pump to enable chromatogram comparision.
The positions of the two independent pens (REC 102) represent the levels of the two corresponding inputs from which the time functions are drawn. Owing to the nature of the dual-channel recorder, the pen of channel 1 is always 2.5 mm behind the pen of channel 2. Full sensitivity ranges from 1mV to 20VDC.
Recorder (REC 102) is equipped with one chart drive control panel and two independent, isolated servo systems with a control panel for each channel. Recorders REC 101 and REC 102 have an attractive design with much attention having been paid to ergonomics: control functions are well positioned, keys and switches are very accessible, and paper is easily changed. Pens, paper and keyboard are all protected from accidental spillage by the moulded cover which fits over the recorder. The pens, which are nonsmear and disposable, give clear, accurate traces for instance evaluation. Chart paper is of a high quality, and 200 mm wide.
Improved control capabilities permit the use of these recorders in all Pharmacia Biotech chromatography systems.
Technical Specifications
Recording channels: REC 101: 1-channel
REC 102: 2-channels
Input ranges: 1, 2, 5, 10, 20, 50, 100, 200, 500 mV and 1, 2, 5, 10, 20 V
FSD (lull scale deflection) for each channel
Variable ranges: 40-100 % FSD
Accuracy of span: < 0.3 % FSD
Non-linearity: < 0.3 % FSD
Dead zone: < 0.2 % FSD
Pen response time: 0.2s
Input impedance: 1 MΩ DC
Input: Floating asymetrical
Input terminals: Low profile" banana plugs
Input current: < 5 nA
Maximum input voltage: Max. 60 V between channels and max. 30 V between channel and ground
Common mode rejection: > 130 dB
Zero adjustment range: -50 % to +150 % of FSD
Zero position: Choice of left or right-hand side of chart by a switch on rear panel. (Right-hand zero point on delivery)
Zero drift: < 1 µV/ °C
Pen lift: Electrical, independent control of pen 1 and pen 2, automatic pen lift at power down or after 30 s stop of chart speed
Chart speed range: 0.1, 0.2, 0.5, 1, 2, 5, 10, 20 mm/s or mm/min
Chart paper: 25 m roll according to DIN 16 230
Chart paper life: Max. 4 167 hours at lowest chart speed. Min. 20 min at highest chart speed
Pens: Disposable, fibre-tip cartridge
Peristaltic Pump P-1
Introduction
The Peristaltic Pump P-1, 120 V (Code No. 19-4611-02) and 220 V (Code No. 19-4610-02), is a single channel laboratory pump for use in liquid chromatography and other applications where accurately controlled liquid flows are required. Pumping action is provided by a roller cage driven by a stepper motor controlled by a range selector and a continuously variable potentiometer. The motor speed is almost independent of temperature (0-40°C) and load thus giving an accurate and reproducible flow rate under all conditions. An asymmetric shape gives the pump a very low pulsation in the forward direction. The backward direction has a pulsation which is more equal to traditional peristaltic pumps. Maximum flow function and a connector for remote control and pulse counting are provided.
Technical Specifications
Flow rate range 0.6-500 ml/h depending on tubing diameter and range selector (x1 or x10).
Standard tubing Silicone rubber of internal diameters;1.0 mm, 2.1 mm and 3.1 mm
Voltage 100 or 120 V ± 10 %
220or240V±10%
Frequency 50-60 Hz
Max Power 20 W
Temperature range 0-40°C
Dimensions 112 x115x145 mm (WxDxH)
Weight 1.7 kg
Motor Stepper motor
Remote control The following operations can be obtained via the remote control socket
Outputs: Actual speed (0-200 Hz)
Forward/backward direction ON/OFF
Inputs: Forward /backward direction.
Speed control (0-200 Hz)