Nikon Eclipse E800M
Objektnummer | B00016844 |
---|---|
Numéro d'identification | 016844 |
Nom de l'objet | Nikon Eclipse E800M |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Nikon
model : Eclipse E800M
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The ECLIPSE E800M main body, the 0.5x macro objective, the macro slider and the revolving nosepiece have been factory-adjusted to each.other and labeied with the same manufacturing number. Don't assemble the Parts with different manufacturing numbers in order to ensure satisfactory performance.
ELLIPSE E800M (main body of the microscope)
Power source: For 100/120 V area: V-PS1 OODU-1 power supply
For 230 V area : V-PS100E power supply
Input voltage: 12 V DC
Light source: Lamp rating: 12 V DC, 100 W
Lamp type: Halogen lamp
(OSRAM HLX 64623 or PHILIPS 7724)
Protection class: Class I
Operating environmental Temperature: 0° to +40°C
conditio ns : Humidity: 85% Rh max., noncondensing
Attitude: 2000 m max.
Pollution: Degree 2
Installation: Category II
Indoor use only
Conforming standards UL listed product
( for 100/120 V area): FCC 15B Class A satisfied
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la Classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
Conforming standards GS-approved product
( for 230 V area): EU Low Voltage Directive satisfied
EU EMC Directive satisfied
n V-PS1 OODU-1 (Power supply for 100/120 V area)
n V-PS100E (Power supply for 230 V area )
Refer to the instruction manual provided with the V-PS1OODU-1 or V-PS100E power supply.
User Comfort and Ergonomie Design Buift Right in
· Advanced Ergonomie Design allows Operation from a natural posture without strain. Focus control, stage handle field diaphragm and power controls are placed within easy reach.
· Low stage design for easy manipulation of revolving nosepiece and specimen handling.
· Three-way tilting trinocular tube adjusts from 10-30 degrees for the most comfortable viewing angle.
· Ultra stable, modular design - aceepts a complete line of dedicated modules integrated into the structure of the stand without compromising optical performance and stability.
· Wide base and arm ensures stable image acquisitions at high magnifications. Can withstand loads live times heavier than conventional models.
Unmatched Optical Quality
· CFI60 Optics - langest working distance with high numerical aperture objectives.
· Widest magnification range and the world's first 0.5X objective (for actual size documentation).
· Langer parallel optical path and unequaled fluorescence observation capability.
· lmproved lamphouse Illumination (12V1100W externe! transformer).
·
Integrated 5 place linear fluorescence filter changer.
Easy access to controls an front of microscope.
Other Features of E800
· Ultra-wide viewing is standard with 25mm field number eyepieces.
· Interchangeable, 6-position reversed nosepiece.
· 215° centerable and rotatabre stage to facilitate framing during photomicrography.
· Four buk-1n diascopic
· Available E800M stand for macro observation with exclusive Plan Achromat 0.5X objective for 1:1 specimen documentation.
· Unique drum type triple macro condenser allows the same condenser to be used from 0.5X to 100X.
Specifications
Magnification
10x- 1500x( 5x-1500x) in E800M; Up to 3000x with Mag. Module) for observation 2x-500x(1x-500x in E800M; Up to 1000x with Mag. Module) for 35mm photomicrography
Optical system
CFI60 System (Infinity optical system)
Parfocal distance
60mm
Eyepiece tube
V-TF Trinocular tube (Inclinaton angle 20° V-TE Tilting Trinocular tube (Tilting type: 10 30°) Eyelevel is constant with or without intermediate module Siedentopf type (Interpupilary distance: 51 80mm), F.O.V.: 25 mm
Eyepiece
10x (F.O.V.: 25mm) Diameter: 32mm
Option: 10F (F.O.V. 22mm), 15x (F.O.V. 14mm)
Photo lens
PLI Projection lens: 2x, 2.5x, 4x, 5x
Epi-fluorescence
Built-in type (Inserted into the arm)
Illuminator (Option)
5 filter blocks mountable
Nosepiece
Sextuple Nosepiece, Sextuple DIC
Nosepiece (Analyzer slot equipped)
Coarse/fine focusing
Fine: 0.1 mm pre rotation, Coarse:
12.7mm per rotation
Minimum reading: 1 micron on left side knob
Coarse motion torque adjustable
Refocusing stopper incorporated
Stage handle and focusing knob are at equal distance form the operator
Stage
Hard cating paint type
Rectangular 146mm x 212.5mm surface stage,
78mm x 54mm cross travel range using
Low-positioned coaxial X and Y motion control
Knob on right-hand side
Centerable by hex key, 215 degrees
Rotatable (Ball bearing) with 2 glaxx plates
Substage
Vertical movement range: 32 mm
Illumination
12V 100W LL Halogen Lamp, Precentered and prefocused,
(Option: Centerable with reflection mirror type)
Autophoto switch (Adjustable 8-10V with 0.1V step) equipped
Filters
Filter magazine incorporated and detachable:
Accepts 5 filters (Standard: ND2, ND8, ND32, GIF, Diffuser)
NCB11 filter separately equipped
Optional filters (dia. 52mm wratten filters) mountable on field lens unit