Millipore AFS 10
Objektnummer | B00013326 |
---|---|
Numéro d'identification | 013326 |
Nom de l'objet | Millipore AFS 10 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The AFS Technology
Introducing the Analyzer Feed System (AFS)
The AFS TM supplies clinical analyzers with the National Committee for Clinical Laboratory Standards, College of American Pathologists (NCCLS/CAP), Type I, reagent water. Performance specifications for final product water, which is low in ionic, organic, microbiological, and particulate contaminants, are listed in Chapter Six.
The AFS uses reverse osmosis (R0) technology to remove a broad spectrum of contaminants from prefiltered feed water and a patented pack design (the AFSPAK TM ) to polish final product water to greater than 10 megohm-centimeters (MΩ-cm) resistivity. A microprocessor monitors water quality through measurements of the conductivity of the feed water and comparing it to the conductivity of the RO permeate to determine the percent rejection of the RO membrane. The system also measures product water resistivity and temperature. The control panel displays these parameters, the current system mode, and active menus.
Numerous system features ensure consistently high water quality.
The patented ROPAKTM extends the life of the RO membrane (in the RO cartridge) by combining particle filtration, carbon adsorption, and an anti-scaling compound to prevent fouling, chlorine attack, and scale formation.
The RO cartridge is automatically flushed to prevent biofilm build up on the RO membrane surface, further reducing fouling.
The optional degasser eliminates most dissolved gases from product water, protecting your analyzer from inconsistent clinical results caused by bubble formation in the analyzer.
If there is a gross system leak, it is detected by a sensor in the tray beneath the AFS, causing the water inlet valve to close. The tray is sloped, collecting and funneling any leaks to drain.
The MillipakTM-100 final filter, a 0.22 micron (µm) absolute membrane filter, ensures extremely low bacteria levels in the product water.
In addition to providing consistently high water quality, the AFS System is easy to use and maintain.
The Compact design of the system allows you to place it on a lab bench, moveable cart, or mount it on the lab wall.
The ROPAK and AFSPAK are easily installed and removed. A yellow caution light on the control panel indicates when the packs need to be changed and the display tells you which pack to change.
The RO cartridge is easy to sanitize and clean through an access port on the top of the system.
A pressurized tank stores intermediate-grade water which is further polished by the AFSPAK when the analyzer demands water. When the analyzer does not require water, the AFS processes water until the storage tank is full, then automatically enters the Tank Full, Standby mode.
An optional Point-of-Use Dispenser allows you to dispense water up to 2.1 meters (m) 7 feet (ft) from the system for applications needing Type I water (for example, reagent make up, bench chemistries, etc.).
The Eight AFS
There are Eight AFS described in this manual. The AFS 10 produces 10 liters/hour (L/hr) of final product water. It is used for clinical analyzers that require low volumes of feed watet For analyzers that require more water, Millipore offers the AFS 18, AFS 30 and AFS 60. These systems produce up to 18 L/hr, 30 L/hr and 60 L/hr, respectively. Each system is available for different voltage levels (120 V, 230 V, and 100 V) and with an optional degasser.
Water Flow Through the System
Pretreated tap water flows into the system through the ROPAKTM (1) which protects the RO membrane in the RO cartridge from fouling, chlorine attack, and scale formation. From the ROPAK, the water flows through the RO cartridge (2) for final pretreatment. In the AFS10, the RO-treated water flows to either the pressurized tank (3) for intermediate storage or to the AFSPAK (4) where it is polished to greater than 10 MQ-cm. Product water then flows through either an optional degasser (5) where dissolved gases are removed, or directly through the 0.22 u m final filter (6) where bacteria are removed. Fully purified water flows through the product port (7), and to the clinical analyzer. In the AFS 18D and AFS3OD, water flows through the degasser before it flows through the AFSPAK for polishing.
Technical Information
Performance Specifications
All eight AFS systems described in this manual meet the following NCCLS performance specifications.
Contaminant |
Performance Specification |
Resistivity (minimum) |
≥ 10 Megohm-cm (MΩ-cm) |
Bacteria |
≤ 10 colony forming units per milliliter (cfu/mL) maximum bacterial content |
Hourly production rate 1 |
AFS 10: 10 L/hr AFS 18: 18 L/hr AFS 30: 30 L/hr AFS 60: 60 L/hr |
Particulates |
0.22 micron (µm) filtration |
Organics |
Activated carbon removal |
Silica |
≤0.05 milligrams per liter (mg/L) as Si0 2 |
1. Flow rate depends an the RO feed water pressure, the condition of the RO membranes, and water temperature. Typical instantaneous peak flow is (1.5 L/minute). The hourly production rates shown in the table are achieved when the water temperature is 15°C (Celsius) or 59°F (Fahrenheit) and RO transmembrane pressure is 100 pounds per square inch (psi) or 6.9 bar for the AFS 10 and AFS18 and 150 psi (10.34 bar) for the AFS 30 and AFS 60. A lower water temperature, RO feed pressure, or inadequate RO cartridge maintenance can reduce product flow rate.
System Specifications
Dimensions
Parameter |
Specification |
Height |
58.4 centimeters (cm) (23 Inches [in]) |
Width |
67 cm (26.5 in) |
Depth |
42 cm (16.5 in) |
Operating weight (with PAK and water) |
46 kilograms (kg) (102 pounds) |
Temperature and Pressure
Parameter |
Specification |
Operating temperature |
5°C35°C (41°F95°F) |
Storage and transport temperature |
Do not freeze |
Feed water pressure |
Maximum: 50 psi (3.3 bar) Minimum: 30 psi (2 bar) |