Memmert U 10
Objektnummer | B00013206 |
---|---|
Numéro d'identification | 013206 |
Nom de l'objet | Memmert U 10 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Memmert
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
1 Temperature regulator
1a Scale lock
2 Mains supply switch
3 Green pilot lamp (ready for use)
4 Yellow pilot lamp (heating)
5 Slide control/rotary knob (fresh air ventilation)
5a Scale lock
6 Thermometer
Special equipment
7 Red pilot lamp (overheat safety device; units without safety device have a black cover)
11 Overheat cut-out/class 2 overheat controller/class 3.1
11a Scale lock
12 Reset button for overheat cut-out class 1 and 2
22 Timer (alternatives: 120 min., 14 h, 24 h)
Technical data summary
MEMMERT appliances are electrically heated and thermostatically controlled (not explosion-proof "Important for Loading"). Series U, S and B have natural air circulation whilst series UL, SL and BL have fan assisted circulation. The door is opened by pulling the door knob.
Temperature ranges
From 5°C above ambient (minimum operating temperature series S - SL +50°C) to nominal temperature = maximum temperature (see rating plate).
The maximum ambient temperature at the installation location should not exceed 35°C.
Overheat safety devices
DIN 12 880
safety devices Class 0, no safety device (standard).
Class 1, 2 and 3.1(special equipment).
Electrical supply
A.C. supply; three phase, 50/60 Hz. Voltage and Power consumption (see rating plate). Adequate insulated supply which incorporates earth conductor (VDE 0720). Protection class IP 20, no humidity protection (DIN 40050).
Installation options
(except model 80)
Place unit an a flat working surface. If using a stand (accessory for models 30 - 60) or if having mode) 80, then ensure that the floor is level. Ensure at least 80 mm clearance between back of oven and wall.
Stand accessory
When using the stand accessory it is first necessary to remove the
four feet from the cabinet.
Wall mounting
(except model 80)
Integral rear mounted keyhole slots are provided an models up to U 30/B 30/S 30 whilst a metal mounting bracket is available for models UL/SL/BL30 as well as for all units up to model 60. Dimensions offixing screws fiepend an the weight of the charge and the quality of the wall. As the distance between the rear of the oven and the wall is limited to 18 mm in the rase of the keyhole slots, and to 40 mm in the case of the mounting bracket, it is essential that the wall area surrounding the ventilation tube is of an incombustible material. Where necessary a heat resistant panel should be used.
Stacking device
(except model 80)
Where the requirement is for two ovens of the same size to be placed one an top of the other, the oven with the least working temperature should be placed at the bottom. Remove the front feet of the top oven and replace them with the ones supplied with the stacking device (only if the ovens are not originally supplied with the stacking device). Remove the top of the bottom oven and turning it upside down place the drilling jig into the back corner. Mark out the hole position and drill a 4.2 mm diameter hole. With the screws provided fix the centering cylinders into position and re-fix top cover.
Modell Model Modele Modelo |
A
mm |
in |
25 |
440 |
17,32 |
26 |
360 |
14,17 |
10 |
480 |
18,90 |
15 |
560 |
22,05 |
30 |
480 |
18,90 |
Modell Model Modele Modelo |
A
mm |
in |
B
mm |
in |
30 |
380 |
14,96 |
840 |
33,07 |
40 |
580 |
22,83 |
920 |
36,22 |
50 |
780 |
30,71 |
1040 |
40,94 |
60 |
980 |
38,58 |
1240 |
48,82 |