Mattson GL-3020
Objektnummer | B00021188 |
---|---|
Numéro d'identification | 021188 |
Nom de l'objet | Mattson GL-3020 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Simple. Flexible. Powerful. Tailored for industrial use.
With DeterminatIR, you have a powerful, routine analysis FTIR/FT NIR industrial spectrometer, with all of the analytical power of a laboratory FTIR practically packaged for use in a warehouse, loading dock, or production area.
From the core spectrometer to the methods of sample introduction to the software, DeterminatIR's wideranging applications have been tailored specifically to the needs of industrial analysis.
On-the-spot analysis.
Take the rugged, mobile DeterminatIR to your samples and streamline inspections of incoming raw materials inspection or outgoing product quality.
Whether you are in the pharmaceutical, petrochemical, polymer, paint and coatings, nuclear power, or specially chemical industry, the DeterminatIR can be a powerful tool to help you maintain control of your routine analysis.
With a full range of sampling configurations to allow both qualitative and quantitative analysis of most organic materials in all of their forms, the DeterminatIR easily accommodates liquids, powders, pastes, gels, and many solid samples.
Easy, flexible operation.
Operation is easier than ever with Mattson's QC-Complete Software and made flexible with Mattson's WinFIRST software and ApPro macros. Every aspect of your analysis - from methods development to system validation and from system administration to customizable, turnkey, end-user interfaces - has been considered in detail throughout the development of the DeterminatIR.
Rugged inside and out.
Founded on Mattson's proven Genesis series of laboratory spectrometers, the DeterminatIR has been enhanced to extend its capability into the harsh industrial environments encountered outside the laboratory. lt has been designed to be used in the QC lab, as well as on the factory floor, on the loading dock, and in the warehouse - without compromising any of its Performance.
DeterminatIR has been designed around Mattson's rugged, vibrationinsensitive Quadrascan interferometer utilizing Corner Cube retroreflector optics to insure the best possible optical performance. Corner Cube retroreflectors instantaneously compensate for any mirror tilt that might occur while the interferometer is scanning.
Every data point of every scan is referenced to the frequency of an internal laser to maintain the highest possible level of frequency accuracy and precision.
All focusing and collimating optics in the DeterminatIR are constructed of solid blocks of aluminum which have been turned with diamond bits to create first-surface reflectors of the highest quality.This solid design yields extremely rugged mirrors that are impervious to warping and drooping over time. First-surface reflectors avoid the problems that are encountered with conventional mirrors that use reflective coatings, which can peel and flake off over time.
Completely sealed internal interferometer chamber can be desiccated, providing an additional layer of protection for the optics.
Vibration Shield insulates the interferometer from vibrations in the environment.
Microcast baseplate is cast as a single piece to minimize misalignment effects induced by thermal cycling.
Software-controlled autoalignment of the interferometer corrects for any remaining alignment drift and keeps the interferometer operating at its peak.
Multilayer cover design provides maximum protection by channeling spills away from the optics and electronics.
Rugged, heavy, cold-rolled, steel outer cover provides solid protection from extreme blunt force as well as every day knocks.
Mobile
The DeterminatIR can be used as a stationary system or as a mobile analyzer when coupled with its specially designed transport.All components of the DeterminatIR fasten securely to the transport.
A wide wheelbase provides stability even on inclines and large wheels let the cart navigate effortlessly over bumps and uneven terrain. Brakes prevent the system from rolling during operation. A cord reel keeps the power cable out of the way during transport and allows you to operate the system at long distances from a single power outlet. The transport even has a storage cabinet for storing consumables and a docking station for securing alternate sampling modules.
Flexible
The DeterminatIR can be configured as a mid-infrared or nearinfrared system. Sampling is done with specialized, interchangeable sampling modules for in-compartment analysis or with fiber-optic probes for remote analysis.
Remote Analysis: Both mid-IR and near-IR fiber-optic probes are available. Fiber-optic probes offer ultimate sampling ease for quick identification of unknown materials, or identity verification of incoming raw materials. Fiber-optic probes can dramatically increase your sample throughput by eliminating timeconsuming sample preparation steps. Some probes can even collect spectra directly through thin plastic bags or glass vials without ever actually contacting the material, completely eliminating the possibility of contaminating the samples.
Interchangeable Internal Sampling Modules: A full line of in-compartment, specialized modules are available for more sensitive analyses or for those situations when remote analysis is not necessary. Each module is designed for specific types of analyses to make sample application as simple as possible and to minimize the cleanup process between samples. Eliminate sample cleanup completely for liquid samples by using disposable cuvettes for the near-IR or disposable IR cards for the mid-IR.Temperature-controlled modules are available for use with temperature sensitive samples such as hydroxyl number analysis. Modules are completely enclosed to protect them from spills and physical contact which might otherwise result in damage. All of those modules can be easily interchanged without the use of any tools and without any alignment. Modules can even be locked in place if desired to assist with maintaining SOPs.