Macherey-Nagel Nanocolor 500D
Objektnummer | B00018228 |
---|---|
Numéro d'identification | 018228 |
Nom de l'objet | Macherey-Nagel Nanocolor 500D |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Machery + Nagel
model : Nanocolor 500 D
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Digitalphotometer NANOCOLOR® 500 D |
Mircoprocessor controled filter photometer |
The digital photometer NANOCOLOR® 500 D is the consequent development of our very successful photometer NANOCOLOR® 400 D. Adapted to our customers requirements, today and tomorrow, it is suitable for universal use in water and wastewater analysis. This includes municipal and industrial wastewater, drinking water, surface water, ground water as well as cooling and boiler water. |
Save time and make your lab time easier
Fast measurements by NANOCOLOR® barcode technology
- Fully automatic, instant cuvette detection by the built-in laser scanner allows simple and fast routine analysis
- Selection of the test method and suitable wavelength, the actual measurement and storage of the measurement results are carried out automatically without having to use any other key
Measurement without cuvette slot cover
- The modern designed optics is insensitive to external light and allows straightforward measurements
Everything at a glance
- The modern, illuminated graphic display with user guidance shows all the important data at a glance.
Pre-programmed tests and photometric basic functions
- More than 100 pre-programmed tests with over 200 analysis programmes
- Straightforward call-up of all photometric basic functions, such as absorbance, factor, standard, transmission and kinetics
Experience precision and increase accuracy
Self-explanatory user guidance
- All tests and menu items can be activated fast and easily. The photometer can be operated without any complex and time-consuming training
Manual with test instructions, presented as pictograms
- Safe test procedures without complex instructions
Highly accurate measurements by high-quality optical components
- The high-precision optic warrented accurate results
Assure results and meet specifications
IQC according to ISO 9001 with NANOCONTROL NANOCHECK
- Conformance to requirements of internal quality control (IQC) and protection towards supervisors and authorities
-
Fast and easy control of photometric accuracy of the NANOCOLOR® 500 D with NANOCONTROL NANOCHECK
(Cat. No. 925 701) by the user himself - Documentation of results in accordance to GLP
- Individual entries of sample number, sample location, user and dilution
- Clear memory management
- GLP-conform storage of the measured results with all supplementary information such as date, time, sample number, sample location, user and dilution
- Fast and easy access to stored results and data sets
- Convenient export of data
- Easy transfer of measured results and spectra to various common PC formats (e.g. MS Excel)
- Direct print-out of measured data with the NANOCOLOR® thermal printer (Cat. No. 919 16)
Enjoy flexibility and be prepared for the future
No cuvette adapter required
- Round tubes (16 mm OD) and rectangular cuvettes (10, 20, 50 mm) can be used in the universal cuvette slot without any adapter
- Small accessories are not required
Programmable for user defined applications
- Free programming of up to 100 user defined methods
Fast photometer update - free of charge
- At any time, stay up-to-date by easy programme updating via Internet/PC
In the field and in the lab
The
standard built-in, robust high-performance battery with charge regulator allows continuous operation at 220V (110V) and up to 3000 on-site mains-independent measurements.
The battery charge status is shown in the graphic display. In the power saving mode, the photometer switches off automatically after 10, 20
120 min.
Technical data |
|
Type: |
Filter photometer with microprocessor control, self-test and auto-calibration |
Light sources: |
Tungsten lamp |
Optical system: |
Automatic filter wheel with 10 interference filters |
Wavelength: |
345 / 365 / 436 / 470 / 520 / 540 / 585 / 620 / 690 / 800 nm |
Wavelength accuracy: |
± 2 nm |
Wavelength calibration: |
Automatic |
Wavelength selection: |
Automatic, barcode |
Spectral bandwidth: |
10 12 nm |
Photometric range: |
± 3.0 E |
Measuring modes: |
More than 100 pre-programmed tests, 100 optionally programmable methods, absorbance, transmission, factor, kinetics |
Cuvette holder: |
round tubes 14 mm ID, rectangular cuvettes 10, 20, 50 mm |
Data memory: |
500 measured data sets, GLP conform |
Display: |
graphic display, backlight, 64 x 128 pixels |
Operation: |
bar code technology, display user guidance, foil-covered push-buttons |
External light: |
Insensitive, open cuvette slot |
Interfaces: |
USB 1.1 and bidirectional serial RS 232 |
Update: |
Via Internet / PC |
Operating range: |
10-50 °C , max. 90% relative humidity (without condensation) |
Power supply: |
100 240V~, 50/60 Hz / 6V, 3.2 Ah via built-in battery with charge regulator and mains power supply |
DimensionsL / B / H: |
227 x 282 x 105 mm |
Weight: |
2,4 kg |
Warranty: |
2 years |
This appliance comply with the following EC directives: |
|
|
|