Laarmann MG 100
Objektnummer | B00019252 |
---|---|
Numéro d'identification | 019252 |
Nom de l'objet | Laarmann MG 100 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
model : MG 100
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Universal, High Performance Mortar Grinder for Processing of solid materials in dry, wet or
cryogenic condition
- Dry Grinding / Wet Grinding / Ultra Fine Grinding / Cryogenic Grinding
- Mixing
- Cell disruption for DNA / RNA extraction
- The MG100 can handle samples from 10 up to 200 ml
Superior Mortar Grinder engineered to reproducibly grind and mix sample volumes from 10 of up to 200ml.
Method of operation
The Mortar Grinder Model MG 100 is used to reproducibly grind, homogenize and mix a wide range of solid materials in dry / wet or cryogenic condition. The material to be processed falls into the Pulverizing area between Mortar and Pestle by top feeding via the opening which is at the inlet cover. The material is then pulverized and mixed between the Mortar inner surface area and the bottom of the pestle.
In order to match the necessary top pressure with the requested end fineness and the breaking behaviour of the sample to be prepared the MG 100 is equipped with and adjustable Top Pressure Mechanism with scale and a variable speed setting 50-130 rpm and a flexible scraper setting.
Only due to the combination of this 3 key adjustment features a wide range of sample preparation tasks can be reached.
No other grinding system is more easy to clean then the MG 100 Mortar Grinder. When the grinding process is finished the Mortar and Pestle can be taken out with a bayonet lock in order to perform a quick cleaning of the grinding tools.
Grinding, homogenizing, triturating
The Mortar Grinder is the central machine in a sample prep. Laboratory of today. This system is suitable for the fine grinding of any dry substance, as well as for suspensions with different viscosities for analysis, quality control and material testing. It is perfectly suitable for the homogenization of crèmes and pastes. Typically samples with a feed size of up to 8-10mm and a total batch of up to 200 ml (volume depending on the characteristic of the samples) can be ground down to 10-20µm.
High operator convenience and maximum safety
Maximum Grinding performance and maximum safety is important for Laarmann Mills. Due to an integrated safety switch the machine can only be started when the Easy Lock Cover is closed. The Adjustment mechanism allows the simple and fast settings and fine adjustment.
The cover as well as the housing of the MG 100 is made from solid steel. The ergonomic design of the machine and the front panel ensures the easy and simple setting of all working parameters.
Performance features MG 100
- Extremely easy cleaning
- Suitable for dry, wet & cryogenic grinding
- Possible to add and to remoove sample material during the milling process via Cover inlet
- Representative results due to digital time and speed setting
- Precise and optimized results due to variable speed 50-130 rpm
- CE conform
- Meet all application tasks due to a wide selection of grinding tools for the mortar and the pestle.
- Meet all application tasks due to a wide selection of scraper materials ( Vulkollan , Teflon, Beachwood)
- Positioning and removal of Mortar and pestle without tool
- Precise and reproducible pestle setting due to scale adjustment
- Solid steel housing
- Option of pre-crushing for coarser materials
Features and benefits
Benefits
- 5 different grinding media available
- 3 different Scraper materials available
- Quick and extremely easy to clean
- Variable Speed Setting 50- 130 rpm
- Digital time setting
- Digital speed setting
- No tool required to open
- No tool required to take off pestle
- No tool required to take off Mortar
- Dust tight Milling chamber
- Wet grinding
- Dry grinding
- Cryo grinding
- CE certified
Applications
- Cocoa Beans / Chocolate Paste etc ..
- Food and Animal food
- Maize, Beans
- Creams, Emulsions,
- Soil samples
- Minerals
- Glass, Ceramics,
- Cement Clinker, Cement
Pharmaceutical and Homeopathic products such as Tabletts , Dragees , Paste, Herbs and pharmaceutical additives
Mortar Grinder Data
Technical Data
Electrical details 100 - 120 / 200 - 240 Volt 50/60 Hz
Speed 50 - 130 rpm Adjustable
Motor Power 200 Watt
Transport Data
Gross dimensions wxdxh app. 600 x 600 x 600 mm
Net dimensions wxdxh app. 390 x 485 x 375 mm
Gross weight 27 kgs (only machine)
Net weight 24 kgs (only machine)
Features / Performance
Working principle friction
Feed size maximum 8 -10 mm depending on sample
Quantity maximum 200 ml
Quantity minimum 10 ml
Endfineness maximum 10 - 20 µm
Grinding time setting 1 - 99 min. / cont. By digital display
Speed setting 50 - 130 rpm by digital display
Start / Stop function By digital display
Pressure setting By scale adjustable
Pestle adjustment By adjustment wheel
Scraper adjustment By adjustment wheel