Jeol JSM-5400
Objektnummer | B00020299 |
---|---|
Numéro d'identification | 020299 |
Nom de l'objet | Jeol JSM-5400 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Jeol
model: JSM 5400
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
DESCRIPTION, SPECIFICATIONS AND INSTALLATION REQUIREMENTS
The JSM-5400 Scanning Microscope can be used for observation of the entire Area of large sized specimens up to 5-inch in diameter by rotating them. The whole series of operation including vacuum evacuation, image observa-tion, focusing, and photographing have been automated. Moreover, provision of digitally processed still image allows very easy observation of images even in a bright room, making the JSM-5400 outstanding in operability.
Another feature ot the JSM-5400 is that an energy dispersive X-ray spectro-meter (EDS) and a wavelength dispereive X-ray speetrometer (WDS) can he attached to the apecimen chamber at the same time. The JSM-5400 la a-high performance multipurpose scanning electron microscope capable of extending its utility from morphological observation to elemental analysis.
Specifications
Performance
Reso/ution: 4.0 nm (at 30 kV, WD = 8 mm),
SEI (secondary electron image) mode
Magnifteation: x15 (WD = 48 um) to 200,000 (25 steps)
Digital indication
Image modes: Secondary electron image (SEI)
Backscattered electron image (BEI)
EOS (electron optical system)
Aceelerating voltage
(Aee.V.): 0.5 to 30 kV
0.5 to 3 kV, 0.1 kV/step (26 steps)
5 to 30 kV, 5 kV/step (6 steps)
Hysteresis elimination function is linked for Acc.V. change
Electron gun filament: Precentered W hairpin filament
Cartridge type
Hinge type gun open/close mechaniam
Filament monitor Built-in
Gun bias
AUTO mode: Automatic selection of the following 2 ranges:
For high Acc.V. (2.1 to 30 kV)
For low Acc.V. (0.3 to 2 kV)
MAN mode: Continuously variable manually
Alignment: Electromagnetic deflection type
Lens system: 3-stage
Zoom condenser lens (CL): 2-stage
Objective lens (OL): single-stage
OL aperture Variable type (3-step)
Continuous heating type
Fine position adjustalle
Focus wobbler: Built-in (usable in TV mode)
Focusing: Push-Button and knob type
Manual, and automatic fdicusing device (AFD) built-in
Automatic focus tracer (AFT) buflt-in.
Stigmator: 8-pole electromagnetic type
Manual, and automatic astigmatism correction device (ASD) built-in
Stigmator memory built-in
Specimen tilt correction: Scanning coil: |
0 to approx. 8° correctable Dynamic Focusing Device(DFU) built-in 2-etage electromagnetic deflection type |
Magnification control: Automatic magnification corrector (MAC) built-in
Viewing field fine
shift : Electromagnetic type
±10µm (at 30 kV, WD 20 mm) in all directions by JOYSTICK control
Probe current range : 10 -12 to 10 -6 A
Specimen Stage
Type Eucentric goniometer
Specimen movements
X direction shift: 80 mm
Y direction shift: 40 mm
Tilt: -10 to +90°
Rotation 360° (endless).
Working distance (WD): 8 to 48 mm continuously variable
Digital indication an LCD by Z sensor
Specimen size: 10 mm dia. x 5 mmh, 10 mm dia. x 10 mmh
32 mm dia. x 5 mmh, 32 mm dia. x 10 mmh
51 mm dia. x 5 mmh, 51 mm dia. x 10 mmh
76 mm dia. x 5 mmh, 76 mm dia. x 10 mmh
10 mm dia. x 10 mmh x 20 pcs.
Specimen exchang: Draw-out type
Slide type mechanism for loading/unloading of specimens
Detectors
SE/BE detector Consists of a collector, scintillator, light
guide and a photomultiplier tube
Scanning System
Scanning modes: PIC (frame scan)
TV (frame scan)
LSP (line scan)
Scanning speed
For observation: 0.27, 0.58, 2.88, 9.6 s/frame, TV scan
(TV scan för SEI only)
For photographing: 50 Hz: >> on LCD ... 28.8 s/frame
on LCD ... 86.4 s/frame
60 Hz: >> on LCD 24 sfframe
on LCD ... 72 s/frame
Display System
Magnification display: x15 to 200,00 0
(On LCD, and CRT in PIC1 mode only)
Observation CRT: 2 One, 9-inch green CRT
Frame size: 135 x 18G mm (TV mode)
Image quality control
Manual control: Rapid exposure system (display on CRT)
Auto control: Automatic contrast and brightness control
(ACB) built-in
Observation condition display
Upper line on LCD : Accelerating voltege
Magnification
Working distance
Film number
ACB linkage indication (A; ON/OFF)
Photo speed (or >>)
Lower line on LCD : Evacuation sequence
Warning/Fhoto monitor/Check data
Observation CRT: Digital diegay in the P/C1 mode only
Accelerating voltage
Magnification (O N/OFF)
Micron marker with value
Film number
Photo Recording System
Exposure meter: Rapid exposure system (displayed on CRT)
Shutter: Automatic shutter built-in
Photo monitor Digital indication on LCD
Data recording
Data display: ON/OFF selectable (on CRT and Photograph)
Image on character
Base: ON/OFF selectable
Data contents: Accelerating voltage
Magnification
Micron marker with value
Film number (4-digit: manual set, and 2-digit: manual/auto set)
Data display modes All data ON
Magnification OFF
Micron marker (with value) ON only
Camara for scanning
image (option): Manual and automatic shutters built-ln
MP-35030: For 6 x 7 roll film (photo/CRT magnification
ratio : 0.5)
MP-35040: For instant pack film (0.75)
MP-35050: For 35 mm roll fi/m (0.25)
MP-35060: For instant 4 x 5 film (1.0)
MP-35070: For Polaroid auto film (0.85)
Recording CRT: One, 9-inch green CRT
Image Frame Store System
Memory capacity
Number of pixels: 512 x 512 (512 x 480 for image)
Number of gray
scale steps: 256
Number of frames One (Video graphic printer with 4-frame expand
function is optionally available)
Still image display
CRT One, 9-ineh green CRT (EIA, interlace scan type)
Frame size: Approx. 128 x 166 mm
Vacuum System
Control: Fully automatic sequence control
( electromagnettc valves used)
Evacuation sequence is indicated on LCD
Ultimate pressure: Approx. 7 x 10 -4 Pa (5 x 10 -6 Torr)
Eva euation time: Approx. 2.5 min
Vacuum pumps: One, 420 lit ./ s oil diffusion pump with water cooling baffle
One, 100 lit ./ min oil rotary pump (RP)
Vacuum gauge One, Pirani gauge
Preesure is indicated as a % on LCD.
Checkers and Safety Devices
Checkers
Auto checkers: 5 warniug indication on LCD
Manual checkers: 8-item indication on LCD (including 2 items
for optional devices)
Safety devices: Protective devices are built-in for power and
water failures, and pressure increase.
Others
Ports for X-ray
Measurement: Two, ene each for optional WDS (wavelength
dispersive X-ray spectrometer) and EDS (energy
dispersive X-ray spectrometer)
TV output terminals : Two BNC-R connectors (75 ohms)
(For TV mode ond still image)
TV output signal: TV mode; EIA or CCIR
Still image; EIA
Composite, positive polarity
1 Vp-p, H =15.75 kHz , V = 60 Hz
Service outlet: One, 100 V AC, 2 A
Installation Requirements
Power Supply and Cooling Water
Power supply: Single-phase 100 V( ±10%) AC, 50/60 Hz, 2.5 kVA
(voltage drop at 2.5 kVA should be within 3%).
Grounding terminal One, 100 ohms or /ess.
Cooling water
Faucet: One, 10 to 12 mm O.D.
Drain: One, 25 mm I.D. or more
Flow rate: 2 lit ./ min.
Pressure: 0.05 to 0.2 lea .
Temperature: 20±5°C.
(At SEM's water outlet should be 35°C or less.)
Environment
Temperature: 20+5°C.
Humidity 60% or less.
Stray magnetic field : 0.3 µT or less.
Floor vibration: 2 µm or less at 5 Hz (in X, Y and Z directions).
Floor space: 2,500(W) x 2,300(D) x 1,800(H) mm or more.
Dimensions and Weight
Unit: mm & kg
|
Width |
Depth |
Height |
Weight |
Remarks |
Column console |
750 |
900 |
1,485 |
137 |
Standard composition |
Operation console |
650 |
900 |
1,220 |
183 |
ditto |
Image frame store system |
292 |
600 |
880 |
40 |
ditto |
Installation Layout
Unit: mm
Note 1: Fig. 1 shows a typical installation layout for the JSM-5400 Scanning Microscope with an optional XCS (X-ray counting system) of X-ray spectrometer.
Be sure to maintain service areas at the left and rear sides of the microscope even if only a small layout space is available.
Note 2: Install the microscope well apart from facilities producing vibrations or electromagnetic waves (such as roads, husy passages, railroads, elevators, air conditioners and their air outlets, transmission lines, etc.).
Note 3: This microscope does not require any blackout curtain.