Immucor ABS Precis
Objektnummer | B00010746 |
---|---|
Numéro d'identification | 010746 |
Nom de l'objet | Immucor ABS Precis |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
1 |
Tubing guide |
2 |
LabHand mechanism |
3 |
Top cover |
4 |
Front blind |
5 |
Plate washer, valve and pump unit |
6 |
Safety shield |
7 |
Power indicator lamp |
8 |
Plate stacker |
9 |
Incubator tower |
10 |
Tubing block |
11 |
Plate washer |
12 |
Syringe pump |
13 |
Wash station |
14 |
Rack location pins |
15 |
Work table |
16 |
Pipetting position |
17 |
Plate shaker |
18 |
Plate reader |
19 |
SamTrak |
20 |
DT drop position |
21 |
CCD camera (for sample tubes) |
22 |
LabHand |
23 |
Peristaltic pump |
24 |
Sampling Probes |
25 |
Probe ciamp |
26 |
Robotic arm |
27 |
Z-rack |
28 |
Tubing ciamp |
29 |
Tubing sleeve |
30 |
Syringe pump outlet tubing |
1 |
SamTrak rack (samples) |
2 |
Pipetting position an shaker |
3 |
Pipetting position |
4 |
Rack for reagents |
5 |
Wash station |
6 |
Rack for troughs |
7 |
Plate washer |
Flexible Testkonfigurationen
Das offene System des ABS Precis bietet dem Anwender die gewünschte Flexibilität bei der Testkonfiguration.
Das Pipettierschema ist u.a. bei Blutgruppenbestimmungen, Antigen Typisierungen und serologischen Verträglichkeitsproben nach den spezifischen Laboranforderungen frei wählbar.
Ein breites Testspektrum...
· ABD Kurzbestimmung
· ABD Bestimmung mit Serumgegenprobe
· weak D Bestimmung
· Rh-Untergruppen und Kell-Typisierung
· Bestimmung seltener Antigene
· Antikörpersuche, Capture-R Ready‑Screen® (I und II), (4), )Pooled Cells)
· Antikörperdifferenzierung mit Capture-R Ready-ID ®
· serologischeVerträglichkeitsprobe
· Eigenkontrolle
· Pipettierung geringerer Volumina (Neugeborenenblutgruppe)
· thrombozytäre Antikörpersuche Identifizierung undVerträglichkeitsprobe mit Capture-P ®
· Qualitätskontrolle der Reagenzien
...kombiniert mit hoher Kapazität
· bis zu 192 Proben
· bis zu 30 Mikrotiterplatten
· variable Anzahl von Reagenzienracks mit je 12 Positionen
· entnahmesimultan gerührte Reagenzienpositionen
· Inkubator mit 4 temperierbarenPositionen für Mikrotiterplatten
Schnelligkeit
Die Geräteausstattung mit 4 Pipettiernadeln, drehbarem Pipettierteller, 4 temperierbaren Inkubatoren und die externe gleichzeitige Zentrifugation mehrerer Platten tragen maßgeblich zum besonders hohen Testdurchsatz des ABS Precis bei.
General Specifications
Item |
Description |
Accessories & Options |
Microplate Identification System by barcode reading. Additional Plate Stacker and Incubator Tower modules are available for some configurations. Tube racks and SAMTRAK racks for tube diameter 11-18 mm. Standard and customized Reagent racks. Reagent stirrers. Microplate shaker capacity 1, 2 or 4 microplates. Tube Rack shaker (192 tubes). |
Barcodes |
Most commercially available barcodes can be read by the SAMTRAK CCD barcode reader (sample tubes) and the Plate Identification System CCD barcode reader. |
Capacity Standard Configuration |
Up to 192 tubes and 20 plates. |
Carry Over |
Washable tip: down to 10 -7 with sufficient tip wash. Disposable tip: Zero |
Incubator Tower |
Capacity 6 microplates, or 4 temperature controlled plates + 4 at ambient room temperature. Temperature controllable from 5° C above ambient temperature, in steps of 0.1° C, accuracy 0.2° C. |
Interface |
RS232 C/CCIT V.24 Asynchronous serial ASCII. |
Liquid Detector |
Capacitate with clot detector. Minimum detectable volume 200 µl (with 0.9% sodium chloride in a tube diameter 16 mm). |
Operating Conditions |
Temperature: 15° C to 30° C/60° F to 85° F. Relative Humidity: 10-85% at 30° C/85° F or below. |
Pipetting Throughput |
Approximately 6 minutes to fill a plate with 100 µI sample per well, tip wash 2 mI or disposable tips. |
Precision and Accuracy |
Pipetting better than 1% at 10% syringe volume based on volume range 10 µl to 1 ml, gravimetric evaluation. |
Printer |
Most commercially available models. |
Power |
Self-regulating power, and operate at 90 to 130 volts AC and 180 to 260 volts AC, with a line frequency of 47-63 Hertz. |
Pumps |
4 x high precision Syringe Pumps for precision liquid handling size variable from 250 µl to 5 ml.. |
Reader |
As an integral part of the Plato 3 Series Robotic Microplate Processors, the QIAGEN Instruments plate reader is programmed and controlled by the PC resident software. Plates are automatically taken to the reader according to the demands of the preprogrammed assay. As the plate leaves and re-enters the storage stack or incubator tower, its identity can be read with the optional plate identifier barcode reader. This helps to eliminate sample-tracking errors. |
Item |
Description |
SAMTRAK |
Positive Sample Identification unit is installed directly on the work surface to minimize bench space. CCD camera is used for bar code reading. Linear racks hold the sample tubes. Each linear rack holds 16* 12 mm tubes, 12* 12 mm tubes, or 12* 16 mm tubes. Standard configuration SAMTRAK holds a total of 12 racks. |
Tube Size |
Maximum: Tubes OD 18 mm Minimum: Tubes OD 8mm |
Robotic Transfer Speed |
Approximately 4 seconds to take a plate from the stack and place it on the work surface, washer or reader. |
Tip Design |
Washable: Low iron stainless steel (AMPHIC) coating on the inside, and with a ceramic coating on the outside. Other materials may be available. Disposable: Conductive, volume 250 µI or 1 ml. |
VARISPAN® |
From 9-40 mm. |
Volumes |
Minimum sample/reagent volume 5 µI. Maximum sample/reagent volume 1 ml. |
Washer |
As an integral part of the Plato 3 3000 Series Robotic Microplate Processors, the QIAGEN Instruments plate washer is programmed and controlled by the PC resident software. Plates are automatically taken to the washer according to the demands of the preprogrammed assay. 8- or 16-way wash head. Up to 3 different wash Iiquids can be used in addition to rinse liquid. Fully programmable from Plato 3 software. |
Weights & Dimensions
Model Number |
3000 |
3101 |
3301 |
NET. WT, KG |
38 |
50 |
80 |
NET WT. LBS |
84 |
110 |
180 |
Overall Dimensions mm: Width Depth Height |
900 710 600 |
1180 710 600 |
1180 710 670 |
Overall Dimensions ins: Width Depth Height |
36 28 24 |
46.5 28 24 |
46.5 28 26.5 |
Reader Specifications
|
Description |
||
Photometric Method: |
Single/dualmultiple wavelength measurement. 8-measurements, continuous scanning photo‑optical method. Dynamic Digital Control of Light Intensity (DyDiCoLi). |
||
Wavelength Range: Standard 400-750 nm. |
Optical density: 0.00-2.5 0.00-2.0 |
Indication range: 0.000-3.000 |
Measurement range: 400-750 nm 340-400 nm |
Accuracy: |
<1% at 405 nm, 1.0 OD |
||
Linearity: at 405 nm |
0.1 to 0.2 OD +/-1% 0.2 to 1.0 OD +/- 0.5% 1.0 to 2.0 OD +/-0.75% 2.0 to 2.5 OD +/-1% |
||
Linearity: at 340 nm |
0.5 to 1.0 OD +/- 2.5% 1.0 to 2.0 OD +/- 2.5% |
||
Reproducibility: |
Better than +/- 0.3% at 405 nm, 1.0 OD. (SCHOTT neutral density) |
||
Filter type: |
Dielectric Interference. Filter wheel with up to 6-filters |
||
Light Source: |
Controlled Tungsten Halogen Iamps. |
||
Photo Detector: |
Silicon photo diodes |
||
Standard Filters: |
405, 450, 550, 492, 620, 690 nm |
||
10 nm +/- 2 bandwidth All filters must be specified at the time of ordering. |
Washable Tips |
Description |
Disposable Tips |
3101 SI |
Robotic liquid handling with robotic plate management, integrated microplate washer, SAMTRAK positive sample identification System, and temperature controlled tower for incubation of up to 6 microplates. |
3101 DSI |