IGT AC2
Objektnummer | B00013143 |
---|---|
Numéro d'identification | 013143 |
Nom de l'objet | IGT AC2 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Please note, that the following descriptions refer to the successor-model AIC2-5 !
IGT Testing Systems has for many decades been supplying the well-known AIC2-5 printability tester for making numerous types of tests an different substrates and inks in oualitv control and research.
Can test small quantities of ink and substrate in conditions simulating actual practice.
Makes colour strips using various inks an different substrates, which can be used for numerous purposes.
Saves costs because fewer tests need to be made on the printing presses.
APPLICATIONS
The test strips made with the AIC2-5 printability tester are suitable for many purposes:
Measuring colour using colour measuring systems/ spectrophotometers
Use in colour matching systems
The AIC2-5 is used in the following industries:
Printing ink, paper and board, printers
Metals, plastics and packaging
Resins, Iacquers and coatings
Raw materials
Training centres and research institutes
PROPERTIES
The principal properties of the AIC2-5 tester are:
Simple to operate due to the modern software, very reliable and sturdy construction for intensive use over a Iong period, easy and quickly to clean
Manyaccessories available for a wide range of processing possibilities for varioussubstrates and offset, gravure and flexo inks; substrate, ink and printing form are simple and quick to change
§ Repeatability and reproducibility is extremely good
Printing force continuously adjustable from 50 to 1000 N
Two speed types which are both adjustable continuously:
- Constant speed: 0.2 5 m/s
- Increasing speed: 0.5 7 m/s
Extra time interval between 1 st and 2nd printing form, adjustable from 0.2 to 120 s to an accuracy of 0.1 s
Suitable for two printing forms
Maximum printing width 50 mm
Low initial cost and low running costs; complies with the latest standards; provided with detailed instructions for use
Visual appraisal
Density measurements, including establishing colour and density tolerances
Determination of coverage, wear resistance, abrasion resistance, flexibility, adhesion and gloss, ink transfer (in g/mz), Iight fastness, resistance to chemicals, etc.
Testing printing quality, picking, wet pick and wet repellence, roughness, printing penetration, set-off, striking through, mottle, loose and weakly bound paper particles, etc.
The AIC2-5 prints all sorts of materials:
Paper, board, plastic film, cellophane, laminate, metal, etc.
OPERATION
The AIC2-5 printability tester consists of an impression cylinder and a choise of one or two printing forms (printing discs). The printing forces, speed and interval time between the first and second printing disc are adjustable. The printing discs, which are inked on the High Speed Inking Unit 4, are printed on the substrate, which is mounted on the impression cylinder. Many sorts of printing discs are available in various widths for the different tests and inks. When setting the highest speed, interval times of 0.014 s can be achieved. This makes it possible to set practically all the
TECHNICAL DATA
Printing unit
Printing speed:
constant 0.2 - 5 m/s
increasing 0.5 - 7 m/s
Printing force: 50 - 1000 N
Extra interval time: 0.2 - 120 s
Number of printing discs: maximum 2
Printing discs
Printing width: 10, 20, 35 and 50 mm
Printing length: 200 mm
Types:
- Rubber, 85 shore A, coated, for conventional inks
- Rubber, 65 shore A, coated, for conventional inks
- Rubber blanket, for conventional inks - Rubber, 85 shore A, for UV-curing inks
- Rubber blanket, for UV-curing inks - Aluminium
- Also light weight versions < 200 g
General
Complies with EC directives
Inking and printing unit in separate devices
Many accessories available
Simple Operation
Reliable
Low initial cost
Processing of many substrates and inks possible
Easy to move
Detailed instructions for use
Dimensions
Weight: 97 kg
Height: 500 mm
Width: 440 mm
Depth: 500 mm
Electrical connection:
115 - 230 V/ 50 - 60 Hz
Inking Unit AE
The A1-3 or A2-3 printability tester set consists of the printability tester and the IGT inking Unit AE . The printing unit consists of an impression cylinder and one or two printing forms (printing discs). The printing forces are adjustable as well as the speed in case of the use of a spring drive. The printing discs which are inked on the separate inking unit are printed on the substrate which is mounted on the sector. For different tests the sector can be covered with different packings.
The AE Inking Unit was developed for users looking for an uncomplicated way to conduct inking under controlled conditions.
The IGT AE Inking Unit is a slow running inking unit which can be used to ink a maximum of 4 printing discs simultaneously.
The technical design of this inking unit enables the user to make a large number of prints without adding ink or pick test oil and without heating up the device significantly and without influence of misting.
Features:
· Inking time: inking section 60 s and printing disc 30 s
· Extra distribution mechanism for quick distribution of ink
· Rear aluminium drum driven
· Two top rollers with two ink sections each
· Two aluminium drums with top roller
· Low initial costs
· Area 1200 cm 2
· On request suitable for printing discs for new IGT testers
· Rigid construction, can be used in a production environment
· Rubber rollers for conventional or UV-curing inks
· CE compliant
· Size: 600 x 500 x 300 mm
Electrical specs: 115 or 230 V/50-60Hz