Idaho 2380
Objektnummer | B00013877 |
---|---|
Numéro d'identification | 013877 |
Nom de l'objet | Idaho 2380 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Idaho
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The Rapidcyclerm is a rapid tempeeture cycling system based an heat transfer by hot air to samples contained in thin capillary tubes. For most reactions, products can easily be visualized with ethidium bromide an agarose gels after a total reaction time of 15-30 minutes. The rapid temperature response of this instrument can improve product specificity significantly while decreasing the required reaction time by up to an order of magnitude.
Average temperature transition rotes in most instruments are commonly about 1° C/sec when metal blocks or water are used for thermal equilibration and samples are contained in plastic microfuge tubes. A significantfraction of the cycle time isspent heating and cooling the sample, as opposed to being spent at optimal temperatures. Long reaction times of 2-6 hours are common, and slow transition rotes make it difficult to determine optimal temperatures and times for each stage of the cyclic reactions. Instantaneoustemperature changes are notpossible because of sample, container and cycler heat capacities, "Second generation" instru m entation can complete 30-cycles in about one hour. lt is unlikely any instrument based an samples contained in conical tubes with heating and cooling through a metal block can achieve faster cycles at any price. However, with capillary tubes and air heating, transition Tates of 5-10°C/ sec are easily obtained. Complete 30-cycle reactions can be finished in os little as 10 min. Biochemical reactions are fast. The Rapidcycler is the first instrument engineered to match this speed.
The advantages of an air-cycling system include simplicity, low cost, and rapid temperature cycling. Air is an ideal heat transfer medium which can change temperature quickly because of its low density. Temperature homogeneity problems are solved by rapidly mixing air with a fan to provide homogeneous temperature exposure over the sample containers, The sample container is just os important os the heat transfer medium. An optimal sample container should be water-vaportight and have:
(i) low thermal mass,
(ii) good thermal conductivity,
(iii) minimal internal condensation,
(iv) easy sample recovery without cross contamination,
(v) No adverse effects an the reaction.
Whatever the containermaterial, temperatureequilibration will always be achieved faster if the sample volume is small, if the container wall is thin, and if the surface-tovolume ratio of the sample exposed to the container wall is high. Problems with condensation can be reduced by minimizing the free air space surrounding the sample.
vicrofuge tubes are kept water-vapor tight by mechanical closure and, if necessary, overlaid mineral oil. Thermal conductivity is poor because of the material and its thickness (about 1 mm). Internal condensation can occur if mineral oil is not used and particularly if different parts of the tube are at different temperatures.
Sample mixing by convection has been used in conical tube Instruments, The temperature gradients that cause convection are not a good Idea for a temperaturedependent reactions
Capillary tubes are kept vaportight by flame closure of the ends, They conduct heat to the sample better than microfuge tubes because of decreased wall thickness (ca. 0.2 mm) and a better surface-to-volume ratio. Dead air space is minimized to prevent significant condensation, Different volumes of a sample can be placed in the same diameter capillary tube so that rapid heattransfer is maintained,
After amplification, the ends of the glass capillaries can be quickly scored with a fite and snapped off with less risk of aerosolization and contamination than microcentrifuge tubes. The capillary tubes nerve both os a transfer pipette and a container for temperature cycling, The reaction product, already containing Ficoll and an electrophoresis indicator dye, can be directly emptied into a gel well without exposureto an intermediate pipette tip or to extraction procedures.
Decreasing the hegt capacity of the cycling system can markedly decrease the total time required for reactions that require temperature cycling, In addition, air cycling and miniaturization can significantly decrease the costs of reagents and the personnel time required to optimize reactions,