Hamilton STAR 8H
Objektnummer | B00013287 |
---|---|
Numéro d'identification | 013287 |
Nom de l'objet | Hamilton STAR 8H |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
The new Microlab STAR the Sequential Transfer and Aliquoting Robot is the new@generation pipetting workstation for high throughput and high precision liquid handling.
Highest Flexibility and Accuracy
The unique features of the Microlab STAR provide a new level of quality, setting up your assays:
- 4.8.12 or 16 independent pipetting channels.
- Flexible use of disposable tips or needles within the same run.
- Unique air displacement pipetting principle no System liquid, no tubing, no
contamination.
- Volumes from <1 µl to 1000 µl, with superior accuracy.
- Continuous loading and barcode identification for tubes and microplates.
- Surface detection of all organic and aqueous liquids.
- WIN NT-based, easy-to-use and highly flexible software.
Let the Microlab STAR do your large-scale pipetting tasks with the maximum reliability and throughput.
No Limits for Your Assays
Liquid Level Detection
The Microlab® STAR features three types of liquid level detection (LLD):
Capacitive LLD
Capacitive liquid level detection can be used to detect the liquid surfaces of all conductive liquids and even non-conductive polar liquids such as DMSO or deionized water. Even better: HAMILTON's capacitive LLD works in high-density microplate formats.
Pressure LLD
Pressure-based liquid level detection is the choice for non-conductive and nonpolar liquids such as oils, organic solvents, etc. The surfaces of all these liquids can be detected during the aspiration step.
Combined Pressure/Capacitive LLD
For detection of inhomogeneous surfaces (bubbles, etc.), a combination of the two LLD types can be used, leading to unrivalled process sensitivity.
Choose Your Labware
The Microlab STAR meets the highest requirements regarding positional accuracy. lt processes all kinds of labware: tubes, microplates with 96, 384, and even 1536-well formats.
Choose the Microlab® STAR to process your labware.
Tips and Needles
Tired of manually changing tips and needles? The CO-RE technology (Compression-induced 0-Ring Expansion) couples tips or needles to the pipetting head of the Microlab® STAR. This allows you to easily pick up and replace disposable tips or reusable needles within the same run. Just by one software command. lt's that easy. Our tips and needles are available in three sizes: 10 µl, 300 µl and 1000 µI. Of course, our tips with or without filter are RNAseand DNAse-free.
The User Software Your Easy Access to the Microlab® STAR
Ease of Use Meets Highest Flexibility
Whatever your application is, our new WIN® NT-based software will make it work easily. Graphical, syntax-free programming tools guide you through the setting up of your method. For advanced users, direct access to the HAMILTON Standard Language (HSL) is provided, to exploit the full flexibility and logic of a modern, high-level programming language.
1. Create Your Deck Layout
To program your particular method, the first step is to create an appropriate deck layout. Select your labware from a large pre-defined library and place it an the virtual instrument deck by an easy-to-use drag-&-drop procedure.
2. Create and Run Your Method
Once the deck layout is defined, the method can be programmed by dragging a pipetting command, e.g. an "aspirate" command, from a set of icons to a tree displaying your method', A dialog box opens up to prompt you for the appropriate parameters.
After the programming has been completed, the stand-alone Run Screen is used to run the Microlab® STAR, featuring the depk view and three function buttons: Start, Pause, Abort. !
The Autoload Option Increase Your Deck Capacity
Continuous Loading
The Autoload Option for the Microlab® STAR automatically loads and unloads carriers for labware on and off the instrument deck.
The Microlab® STAR equipped with Autoload Option can be run in a continuous mode, where microplates once processed are automatically unloaded from the instrument deck and new tips or fresh reagents are loaded during runtime without stopping the run.
Barcode Identification
The barcode reader is capable of reading various types of barcodes on tubes, Eppendorf cups and microplates. Carriers for labware, too, can be labelled with barcodes to ensure complete tracking of information.
Easy Loading with Autoload
By highlighting the track position of the carrier to be loaded, the Microlab® STAR guides the user in loading the deck according to the layout defined.
Applications and Technical Data
Applications
The Microlab° STAR was designed with your needs in mind. Applications
which have been specifically evaluated include:
- PCR Preparation
- DNA Sequencing
- Pharmaceutical Screening
- Combinatorial Chemistry
- Reformatting of Labware
Dimensions
|
Instrument |
Work Space |
Height |
870 mm |
195 mm |
Width |
1638 mm |
1215 mm |
Depth |
765 mm |
465 mm |
Weight |
140 kg |
|
Deck Capacity
54 Tracks for
54 carriers holding 24/32 tubes, or
9 carriers holding 5 microplates or tip racks
Computer Requirements
Pentium Class CPU, Windows NT 4.0 operating system, 1 GB hard drive, CD-ROM drive, 31/2 inch floppy drive, 64 MB RAM.
The Standard Microlab STAR
STAR stands for Sequential Transfer and Aliquoting Robot. The Microlab STAR performs pipetting operations on liquids in containers placed on its work surface.
The basic model Microlab STAR contains a work surface, called a deck, for placing movable carriers. These carriers hold reagent containers, such as tubes, microtiter plates, or other kinds of labware.
The Microlab STAR work surface is divided into 54 equal tracks (T) for loading carriers with predetermined positions. This obviates the need for precise measurement of positions. The deck has partitions for a maximum of 54 specialised 1-T carriers for sample tubes, or a maximum of 9 6-T carriers for microtiter plates and CO-RE tips. An additional partition space is provided for the tip waste container.
The instrument's internal coordinate system is shown in the figure, located at its origin.
The Microlab STAR is equipped with a pipetting arm typically containing 8 pipetting channels which work independently. The pipetting arm can move in an X direction, whereas each pipetting channel can move relatively independently both in a Y and a Z direction. The Microlab STAR supports pipetting with disposable tips or with needles.
The instrument is equipped with a front cover. This cover is equipped with a magnetic switch that aborts the run when the cover is opened.