Gilson 155
Objektnummer | B00013077 |
---|---|
Numéro d'identification | 013077 |
Nom de l'objet | Gilson 155 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Gilson 155 UV/UVIS Detector
Description
The Gilson 155 and 156 UVNIS Detectors are microprocessor-controlled absorbance detectors that provide dual wavelength detection. Both detector models are compatible components of a Gilson modular HPLC system. And, the 155 Detector with its front panel control is also compatible with other commercially available HPLC systems.
The 155 Detector can be controlled via its front panel or via TRILUTIIoN'"" LC Software. The 156 Detector must be controlled via TRILuTION LC since it does not have an integral front panel display. For information an how to control the 156 Detector, refer to the TRILuTioNTM" LC Software User's Guide.
Optics
Gilson's optical design lets you monitor absorbance at any wavelength from 190 to 700 nm.
The detector has a sensitivity range of 0.001 to 2.0 AUFS (Absorbance Units, Full Scale).
Display
The 155 Detector software is self-guiding.
All parameters, values and commands appear an the four-line display.
All of your options are displayed above the six soft keys. Press a soft key to choose and carry out a command. Numeric entries are made using the keypad.
Features
You can choose from the following modes to specify detection conditions and basic operating parameters:
single wavelength
dual wavelength
scan wavelength
setup
status
fite
Technical Specification
Autozero range
Suppresses up to 1.0 AU with 5 mm flow cell installed
Contact control
Event and autozero inputs: remote contact closure can be activated by other Instruments or the Computer
Three channels output data to a recorder.
Display
Four-line display shows modes, parameters, commands and data (155 only)
Drift
After one hour at constant temperature: 3.0 x 10 -4 AU/hour
Flow sensitivity
4.0 x 10 -4 AU for flow step of 2.0 mL/min to 0.5 mL/min with methanol
Front panel
LAMP ON/OFF hard key, LED indicator Iights for POWER, UV, VIS, REMOTE, and ERROR (155 and 156)
Six soff keys, HELP, ESC and CLEAR hard keys, arrow keys, numeric hard keys, and ENTER hard key (155 only)
Lamp warm-up
One hour maximum time
Lamps
UV Iamp: Deuterium, warranted for 750 hours or 180 days shelf-life Visible Iamp: Tungsten/halogen Iamp, warranted for 500 hours
Linearity
1%, when value is within sensitivity range of 0.001 to 2.0 AU
Flow cells
The following quartz flow cells are available:
|
|
|
Pressure |
||
Flow cell |
Pathlength |
Volume |
psi |
bar |
MPa |
Analytical |
5 mm |
12 µL |
500 |
34.5 |
3.45 |
Preparative |
0.05 mm |
0.16 µL |
500 |
34.5 |
3.45 |
Preparative |
0.2 mm |
0.7 µL |
500 |
34.5 |
3.45 |
Capillary |
8 mm |
35 nL |
3000 |
200 |
20 |
Microbore |
2 mm |
1.6 µL |
500 |
34.5 |
3.45 |
Preparative SFC* |
0.5 mm |
2.0 µL |
10000 |
689.7 |
68.97 |
SFC* |
5 mm |
10µL |
10000 |
689.7 |
68.97 |
*Stainless steel |
Manufacturing standards
Meets applicable Safety and EMC certification standards; UL and CE certified.
Monochromator
Dual beam, steppermotor-driven
Range: 190 to 700 nm
Spectral bandwidth: 9 nm
Setting accuracy: ±2 nm
Setting precision: ±0.2 nm
Noise with air block installed
220 nm, short term, peak to peak; 2.0 x 10 -5 AU/cm
254 nm, short term, peak to peak; 2.5 x 10 -5 AU/cm
350 nm, short term, peak to peak; 10.0 x 10 -5 AU/cm
415 nm, short term, peak to peak; 8.0 x 10 -5 AU/cm
520 nm, short term, peak to peak; 6.0 x 10 -5 AU/cm
650 nm, short term, peak to peak; 4.0 x 10 -5 AU/cm
Operating modes
Single wavelength, dual wavelength, scan wavelength, status, setup, and fite
Peak width
0.0 or 4.0 to 99.0 seconds
Physical spare
26.5 x 43.5 x 15.6 cm (10.4 x 17.1 x 6.2 in) requirement
Power requirements
Frequency: 50 to 60 Hz
Voltage: 90-240V
Current rating: 1.5A for 90-120V or 1.0A for 220-240V
Online switching regulation of line input from 80 to 260V AC
Sensitivity Range
0.001 to 2.0 AU. Sensitivity is adjustable in increments of 0.001 AU.
Software control
You can issue commands via the GSIOC or RS-232
You can use the GSIOC or RS-232 to do the following:
Select all detection parameters
Program parameter changes during run to optimize detection
Send digital detector output
Static RI sensitivity
Methanol versus cyclohexane at 270 nm: 5.0 x 10 -3 AU
Temperature sensitivity
3.0 x 10 -4 /°C for temperature change from 21 ° to 24°C
Weight
8.6 kg (19 lbs.)