GFL Bi-Destillation
Objektnummer | B00014062 |
---|---|
Numéro d'identification | 014062 |
Nom de l'objet | GFL Bi-Destillation |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: GFL
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Water Stills for double distillation
GFL Double Distillers 2102, 2104 and 2108 produce ultra-pure, bacteria and pyrogen free distillat with a very low conductivity (approx 1.6 µS/cm at 20°C). The distillate is in conformity with DAB regulations and the regulations of international pharmacopoeia.
1 Main switch
2 Pilot lamp "Operation mono stage"
3 Pilot lamp "Low water mono stage"
4 Pilot lamp "Clean"
5 Pilot lamp "Operation bi stage"
6 Pilot lamp "Low water bi stage"
Functional description
Double Distillers
GFL Double Distillers are fully automatic.
After switching the unit on via the main switch, the green pilot lamp in the main switch will glow. The built-in solenoid valve is opened. Water flows through the cooling coil of the bi stage glass condenser of the bi stage and the cooling coil of the mono stage condenser and fills the boiler of the mono stage with tap water, regulated by a mechanical water level regulator. The water level regulator controls the water level in the boiler. Water that will not be used for vaporization flows off through the cooling water outlet.
The water level in the boilers is controlled by float switches that cause the heating elements to be switched on and that protect the unit against running dry.
Additionally, the heating elements in both distillation stages are protected against over temperature by thermostatic low water cut-offs.
When the heating elements of the mono stage boiler are below water level, they are switched on and bring the water to the boil.
Steam will rise up and condense on the cooling coil of the mono stage condenser. Mono distillate can be withdrawn from the glass tap at the front of the unit.
If the glass valve for withdrawal of mono distillate is closed, the distilled water from the mono stage will be led to the boiler of the second stage.
When the heating elements of the bi stage boiler are below water level, the heating elements are switched on. The mono distillate in the bi stage boiler is brought to the boil. The steam will condense in the glass condenser of the bi stage and then flows off as bi distillate through the outlet tube with dust guard shield that is screwed to the condenser. The maximum water level in the bi stage boiler is limited by an overflow to the cooling water outlet.
Operation mode of the heating elements in both stages is indicated by yellow pilot lamps.
When the double distiller is operated for the first time, the procedure until production of bidistillate will take approx 2 hours.
Double distillers with separate water supply
(Accessory, should only be built into the unit in our works in Burgwedel)
The accessory "separate water supply" serves to feed the mono stage boiler with softened or desalinated water and the cooling coils with phosphatized or normal tap water.
Industrial water is fed to the boiler through a solenoid valve with approx 0.5 litres per minute. \/Vater that is not required flows off through the "outlet separate water supply". The condensers are fed with cooling water through a second solenoid valve. The cooling water flows off through the cooling water outlet.
Owing to the separation of industrial and cooling water, the water fed to the boiler is not preheated, the efficiency of the still is therefore reduced by approx 10-15%.
Degassing
Carbon dioxide is released through the two exhaust tubes an the top of the unit.
Technical Data
Exterior dimensions (W x D x H) Model 2102- 500 x 260 x 470mm
Model 2104- 550 x 280 x 570mm
Model 2108- 700 x 390 x 700mm
Distillation capacity Model 2102- 2 l/h mono or bi distillate
Model 2104- 4 l/h mono or bi distillate
Model 2108- 8 l/h mono or bi distillate
Distillate quality in conformity with DAB, bacteria and pyrogen free, low gas content.
Conductivity approx 2.1 µS / cm at 20°C
(mono distillate)
approx 1.6 pS / cm at 20°C
(bi distillate)
Cooling water required Model 2102- approx 72 l/h
Model 2104- approx 120 l/h
Model 2108- approx 198 l/h
Watet pressure min / max > 3.5 bar / 7 bar
Electrical connection Model 2102- 230V +/-10%, 50 .... 60Hz, 3.5k\N
Mains connection mains connection cable w/o plug
Model 2104- 220V / 3 / PE or 400V / 3 / N / PE
Caution! Any deviation of the +/-10%, 50 .... 60Hz, 6,5kVV
mains power, even within the Mains connection cable w/o plug above stated limits, has effects on Model 2108- 220V / 3 / PE or 400V / 3 / N / PE
the quantity of distilled water +/-10%, 50 .... 60Hz, 11,5kW
produced. Mains connection cable w/o plug
Protection type / protection class I / IP20
Surrounding conditions Only inside buildings
(not in explosion endangered surroundings)
Height up to 2000m MSL
Ambient temperature +10 °C to +40 °C
Humidity max 80% rel humidity, max 31 °C,
decreasing to 40% rel humidity
at 40 °C.
Weight Model 2102- 18.0kg / 38.0kg
(net / with water filling) Model 2104- 23.0kg / 45.0kg
Model 2108- 39.0kg / 64.0kg