Genevac Mega 980SII
Objektnummer | B00010736 |
---|---|
Numéro d'identification | 010736 |
Nom de l'objet | Genevac Mega 980SII |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Genevac
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Mega Evaporation Systems
Genevac's new Series II Mega Systems provide ultra high throughput solvent evaporation.
Accommodating samples in an extensive variety of microtitre or smaller formats, Mega systems are also designed to handle formats langer than a microtitre plate. Common examples are fraction collector racks from LC/MS systems, larger reaction blocks or proprietary sample formats. Evaporation Performance is similarto HT systems.
Common applications include
HPLC or LC/MS Purification
High Throughput Screening & Compound Storage
High Throughput Synthesis
Sample Handling & System Operation
Access to the evaporation chamber is via a top opening, powered aluminium lid. Samples are loaded into large sample swings, which are fixed to a high strength rotor. The evaporation chamber is constructed from corrosion resistant hard anodised aluminium. For high boiling point solvents (e.g. DMSO & NMP), the chamber and lid can be heated to 45°C to prevent solvent condensation during the evaporation process. This gentle heating can also be used to aid evaporation. Coolheat lamps provide most of the heat required for rapid evaporation of solvents. A powerful vacuum system ensures low pressure and low sample temperatures during evaporation. Similar to HT systems, vapours pass from the evaporation chamber into a VC8000T series cryopump/condenser. High boiling point vapours are condensed under vacuum, very volatile vapours pass into the CVP vapour vacuum pump and from the pump exhaust into a solvent waste condenser.
User interface - simple to use with sophisticated capabilities for optimum evaporation
Genevac Series II systems are easy to use, high performance systems. Evaporation runs are selected by highlighting a nun from a menu on a full colour LCD screen. Each nun has a user-defined description for easy identification. The embedded PC Stores up to 100 runs. This easy to use interface provides very simple and flexible operation, ideal for a multi user environment. A run is selected and started sample temperature control and shut down are automatic. For optimum evaporation settings, numerous parameters can be pre-set and stored for each run. The sophisticated software incorporates many safety interlocks to eliminate the risk of harm to the user, samples or system. Important run parameters are displayed "live" on an LCD screen and can be reviewed after each run. Run parameters can be altered during a run if necessary.
Coolheat technology and SampleGuard temperature control provide rapid evaporation
The systems generally consist of three main components: evaporator, cryopump and vacuum pump. Powerful gold plated Coolheat infra red lamps in the evaporator provide the heat required for very rapid evaporation of all commonly used solvents, including DMSO and waten. A high vacuum pumping system consisting of the CVP 100 vapour vacuum pump and the VC8000 cryopump creates low pressure and low sample temperatures during the evaporation process. The unique dual temperature SampleGuard temperature controller prevents the samples from exceeding the pre-set temperature ceiling by controlling the infra red heat input. In normal Operation sample temperatures need not exceed 40°C. Built-in pressure control and an optional extra set of Coolheat infra red Iamps can be utilised to accelerate the evaporation of water and other slow drying solvents.
High imbalance and sample weight limits ensure maximum flexibility and safe use
The Mega systems will operate safely with imbalanced loads of at least 200 g. A safety switch will shut the system down in a controlled way if this limit is exceeded. A visual warning will appear on the LCD display. The Auto-Balancing Mechanism Option can be fitted for loads over 200g imbalance.
Dri-Pure Anti-Bumping System prevents sample loss and cross contamination
Some solvents and solvent mixtures can "bump" unpredictably even under standard centrifugal evaporation conditions, causing sample loss and cross contamination. The optional Dri-Pure system prevents solvent "bumping" with problematic samples. This patented system combines a gentle, ramped application of vacuum and increased rotational speed at specific pressures to eliminate the sample loss and cross contamination caused by solvent "bumping".
Corrosion Proof Vacuum System
The Genevac designed CVP vapour vacuum pump is standard on all HT and Mega systems. Using a unique pumping principle, the CVP pump provides high vacuum, requires no oil changing or regular maintenance and is corrosion proof against all commonly used acids (including Trifiuoroacetic acid).
SPECIFICATION
Technical Data Mega 980/1200
Temperature controls
Control range 1 to 60°C
Control accuracy ± 1.5°C
Control resolution 1°C
Probes 2
Display range -44 to +60°C
Chamber temp range Ambient to 45°C
End of run criteria Timer/IR on:off
Mechanical Data
Max RPM (standard) 900/810
Max RPM (Dri-Pure) 1100/990
Max force 450 G
Drive system Direct
Operating imbalance 200/250
Max sample Ioad 6-9.6 /12-17.6 Kg
IR Iamps 12 / 24
Extra IR lamps Option 6
Vacuum System
Vacuum Pump Genevac CVP 100
Vacuum display 0-1200 mbar
Vacuum control 0-Atmosphere
Vacuum ramp Yes
System ultimate vacuum 0.5 mbar
Auto vacuum vent valve Yes
Condenser Data
Condenser temp -45°C
Vacuum condenser capacity 2 x 8 litres
Exhaust condenser capacity 2.5 litres
Condenser chamber Stainless steel
Condenser drain Manual or auto valve
Condenser level detector Option
Rapid defrost Yes
Continuous running Yes
Auto draining Option
Solvent drain pump Option
Power supply
Standard 2x230v, 50Hz, single phase
Current 21A & 16.8 A Power consumption
980 5.8 kW
Dimensions
Width 1382/1600 mm
Depth 1084/1304 mm
Height (lid closed) 1371/1371 mm
Height (lid open) 2313/2521 mm
Weight 960 / 1300 kg
Chamber dia 980/1200mm
Compressed Air Supply
Pressure Clean, dry air at 6 or 7 bar
Filtration Air filtered to 40 um
Air consumption <10 l/min (free air)
Optional Built in compressor