Genetix Q-Array mini
Objektnummer | B00020146 |
---|---|
Numéro d'identification | 020146 |
Nom de l'objet | Genetix Q-Array mini |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
model: Q-Array mini
annotation: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Q-Array mini
The fully featured compact arrayer
Highest slide capacity in its class
Plate chiller and humidity control
Superior array accuracy for easy analysis
Space-saving laptop control
Simple to use protocol-based software
Fully-Featured Compact Arrayer
The Q-Array mini is a fully-featured compact microarrayer from Genetix.
This benchtop instrument has the capacity for 5 source microplates and 54 slides placed on the robot bed - the highest available capacity in the compact arrayer class. The 1 µm resolution on the X and Y linear servo drive axes and the high-precision flat bed design ensure accurate printing and reproducible spot location. A number of optional extras can be selected, including o source plate chiller, humidity control and an oil-free compressor.
Source Plates
The Q-Array mini is compatible with 96- and 384-well source microplates of different heights. Up to 5 of these microplates can be held on the robot bed. The source plates are positioned at the front of the robot bed, for easy access when changing plates. The height of the
source plate holder can be adjusted to accommodate microplates of different depths and well volumes without the need to change any software settings, making changing between plates of different heights quick and simple.
Microarray Pins
The Q-Array mini is compatible with an extensive range of Genetix solid and multiple spotting (split) aQu pins. The HPLF print head can be used in 1, 2, 4, 8, 16, 24, 32 and 48 pin mode, to give the user maximum flexibility in spotting patterns and the ability to work with 96- or 384-well microplates.
Slide Holders
Slide Position accuracy is achieved with a novel vacuum system, ensuring reproducible array locations on all slides. There are 4 individual user-controlled vacuum channels allowing the user to place a maximum of 54 slides on the system. The holders will take all standard size microscope slides (approx. 75 x 25 mm or 1 x 3 inch}, including membrane-coated slides.
Environmental Control Features
The Q-Array mini is a fully enclosed system to maintain the dust-free conditions that are critical for obtaining successful microarray data. The system can be optionally equipped with humidity control to maintain sample integrity and provide the optimum environment for printing. A high-pressure wash station with 2 source wash bottles and compressed air drying is used to clean the pins. Tests have shown that this rigorous pin washing system eliminates carryover.
Superior Array Accuracy
Superior array accuracy and exceptional array regularity is achieved on the Q-Array mini through a combination of the patented high-precision low-friction (HPLF) print head and linear servo motors. In the HPLF head the pins are held precisely in position by two layers of ball bearings, with no lateral pin movement. The small points of contact between the ball bearings and the pin allow free movement in the vertical direction with almost no friction, thereby reducing the problem of pin-sticking associated with traditional drilled heads (refer to Genetix Application Note "HPLF Head and aQu Microarray Pins"). The linear servo motors that control positioning of the HPLF head have very smooth motion and high accuracy. In comparison, the lower-cost traditional ball-screw or belt-driven systems found in non-Genetix arrayers tend to suffer from friction, backlash and jitter, all of which reduce the accuracy of the printed arrays (refer to Genetix Application Note "Linear Drive Systems").
DNA and Protein Arraying
The Q-Array mini is ideal for protein, DNA and oligo arraying. For protein and antibody arraying, it is important that the 3-D structure of the protein is retained. Proteins and antibodies are particularly temperature-sensitive and will denature if conditions are too warm, so Genetix recommends using the chilled source-plate holder (optional) for protein arraying. Conditions can be optimised further by controlling the humidity and using 300 µm solid aQu pins in the patented HPLF printing head (refer to Genetix Application Note "Protein Microarraying"}. For DNA arraying, both solid and split aQu pins can be used and humidity control is highly recommended for Optimum spot morphology and sample stability.
Instrument Specifications
Slide capacity
Up to 54 standard, 25 x 75 mm, 1 x 3 inch microscope slides
Number of spots per slide
100.000+ with aQu split pins
Spot diameter
75 - 420 µm
Spot location
Can be defined in increments of 10 µm
Centre to centre distance (spot pitch)
User-defined
Spot consistency
<4% CV in diameter for 24 Genetix 150 µm pins
Array density
User-defined
Type of print head
Patented 48-pin high-precision low-friction (HPLF) head
Types of pins
Genetix aQu solid and split pins
Number of pins
Maximum 48
Number of replicate spots per slide
Any number of replicate spots may be arrayed, user-defined
Washing
High pressure wash station with 2 source wash bottles and compressed air drying
Environmental conditions
Fully enclosed system: optional user-defined humidity control
Software
QSoft MicroArraying and QSoft Data Tracking
Dimensions of complete unit (W x D x11)
930 x 650 x 525 mm
37 x 26 x 21 inches
Weight
148 kg / 326 Ibs
Power requirements
Frequency: 45 - 66 Hz
Voltage: 100 - 120 V AC / 210 - 240 V AC
Power consumption: 200 VA Average
500 VA Maximum
Q-Array mini Arraying Speeds
Number and type of pins Speed Time to print full run of 54 slides
with 10,000 spots
---------------------------------------------------------------------------------------------------------------------------
48 split pins -44 spots / sec -3.5 hr (including wash & dry)
48 solid pins -12 spots / sec -12.5 hr (including wash & dry)