ESCO FC2-4A1
Objektnummer | B00017119 |
---|---|
Numéro d'identification | 017119 |
Nom de l'objet | ESCO FC2-4A1 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer: Esco
model : FC2-4A1
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The Industry's Premier Biological Safety Solution from Esco featuring an inherently safe double-fan system, Esco Accuflow microprocessor-based motor speed controller, motorized sliding sash and many others. Extremely low noise level of less than 57dBA.
Certified to DIN EN 12469 by
Features
· Unique Dynamic Chamber plenum with angled filter delivers superb airflow uniformity with deviation no greater than 5% to 6% of average downflow, exceeding European Standard EN 12469 by more than three times.
· Negative pressure plenum surrounds contaminated positive pressure plenum; no fabric bags are used.
· Dual fan design for guaranteed safety. If one fan fails, operator protection is still maintained with only one fan running.
· Esco next-generation Sentinel microprocessor supervises all cabinet functions.
· A large easy-to-read digital display and ergonomically sized touchpad controls improve user interface.
· Fully closable, motorized sash provides an airtight seal for better safety when cabinet is inoperative overnight.
· The front sash is motorized for convenient one-hand operation. The sash control is mounted on the front control panel.
· Integrated sash proximity contacts sense proper sash position, serve as an interlock for the UV lamp, and activate an alarm if the sash is improperly positioned.
· When fully lowered the sash seals automatically against a closed-cell peripheral gasket to isolate the interior and prevent escape of contaminants during decontamination.
· Frameless, shatterproof sash is easier to clean, offers larger, unobstructed viewing area.
· Ergonomically angled front improves reach and comfort.
· Multi-piece work surface removal simplifies cleaning. Single piece, spillage containing work surface is available as an option.
· Raised armrest maintains safety by preventing blockage.
· Esco ISOCIDE antimicrobial surface on all painted surfaces minimizes contamination.
· Downflow air sensor mounted in interior.
· Accuflow microprocessor speed controller maintains safe cabinet airflow despite supply voltage fluctuations.
· Integrated RFI and electrical noise filters eliminate interference with and from adjacent equipment.
· Low noise level <58dBA (1.2 meter (4) cabinet) is significantly quieter than conventional cabinets.
· Dual, long-life ULPA (per IEST-RP-CC001.3) filters for supply and exhaust airflow.
· Enhanced side-capture zones optimize containment.
· Independent exhaust sensor mounted exterior to work area.
· Single piece side and back wall construction.
· Improved lighting is brighter, more uniform and reduces glare.
· Optional UV lamp operates on programmable timer.
· HPV-compliant and approved for safe decontamination using BIOQUELL and STERIS technologies.
Model No. |
Standards Complied |
External |
Internal |
Airflow |
Airflow |
Electrical |
FC2-4A1 |
AS1386.5, EN 1822, EN12469, EN61010-1, IEC61010-1, IEST-RP-CC001.3, IEST-RP-CC007, IEST-RP-CC-034.1, ISO 14644.1, JIS B9920, UL - 61010-1, CAN / CSA - C22-2 No. 61010-1 |
1420 x 805 x 1535 |
1260 x 610 x 670 |
0.48(m/s) / |
0.35(m/s) / |
220-240V,AC, 50Hz,1ø |
· Ambient air is pulled through the perforations located towards the work zone front to prevent contamination of the work surface and work product. The inflow does not mix with the clean air within the cabinet work zone.Inflow air travels through a return path toward the common air plenum (blower plenum) at the top of the cabinet.
· Approximately 35% of the air in the common plenum is exhausted through the ULPA filter to the room. The remaining 65% of the air is passed through the downflow ULPA filter and into the work area as a vertical laminar flow air stream bathing the work surface in clean air.
· The uniform, non-turbulent air stream protects against cross contamination within and throughout the work area.
· Near the work surface, the downflow air stream splits with a portion moving toward the front air grille, and the remainder moving to the rear air grille. A small portion of the ULPA filtered downflow enters the intake perforations at the side capture zones at a higher velocity (small blue arrows).
· A combination of inflow and downflow air streams forms an air barrier that prevents contaminated room air from entering the work zone, and prevents work surface emissions from escaping the work zone.
· Air returns to the common air plenum where the 35% exhaust and 65% recirculation process is continued.