Archives

Edwards RV8

Numéro d'identification: 014636
Statut: Archived Product?The unit is no longer available.
Envoi:
Description:
Edwards Pompe á tiroirs rotatif RV 8. Neuf! Disponible de suite.
siehe Storeview
Plus d’information
Objektnummer B00014636
Numéro d'identification 014636
Nom de l'objet Edwards RV8
Statut Archiv

Statut, conditions de livraison et de paiement

Vérification des appareils

Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.

 

Délai d'expédition

Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.

Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.

 

Méthodes d'expédition

Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange

 

Conditions de livraison

Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.

Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.

 

Modalités de paiement

Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.

Pays

Modalités de paiement possible

Remarque

DE, AT, CH

Paiement par facture, prépaiement, par carte de credit

Paiement par facture est possible pour clients professionnels.

NL, BE, LU

Paiement par facture, prépaiement, par carte de credit

Paiement par facture est possible pour clients professionnels.

Autre pays

Prépaiement, par carte de credit

 

 

Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.

La vente intermédiaire nous est réservée.

 

Défintion des statuts

Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».

Statut

Condition

Remarque

Immédiatement disponible

Occasion

L’article a été déjà entièrement vérifié et peut être envoyé directement à vous.

En stock

Occasion

L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels.

Publié

Occasion

L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison.

Appareil neuf

Neuf

C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable.

Labprocure

Occasion

Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma:              Edwards

Modell:            RV8

Kommentar:    Dokumente engl.


Description

The Edwards RV rotary vane pump is shown in Figure 1. Refer to Figure 1 for item numbers in brackets in the following descriptions. The RV pumps are two-stage, oil-sealed, sliding-vane vacuum pumps. The pump has NW25 inlet (4) and outlet (7) ports, a gas-ballast control (5) and a mode selector (11). When the pump is switched off, an inlet-valve seals the inlet and prevents the suck-back of ai and oil into the vacuum system.

The RV3 and RV5 pumps have a retractable lifting handle (3). The RV8 and the RV12 pumps are fitted with a lifting bracket for use with suitable lifting equipment.

An oil-pump delivers pressurised oil to the vacuum pumping mechanism in the RV pump. You can inspect the level and condition of the oil in the oil-box through a sight-glass (8). Two oil filler-plugs (6) and an oil drain-plug (9) are provided on the oil-box.

The pump mechanism is driven directly by a single-phase or three-phase electric motor through a flexible motor-coupling. The motor is totally enclosed and is cooled by the motor cooling-fan which directs air along the motor fins. The pumps are cooled by an additional fan attached to the motor-coupling.

Single-phase motors are fitted with an on/off switch (12) and a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and (unless you have incorporated suitable control equipment which must be manually reset: see Section 3.6.2), the motor will restart.

The pump is mounted on a base plate on rubber feet (10). Details of suitable vibration isolators and other accessories are provided in Section 7.

Performance modes and controls

The pump has two controls : the mode selector (11) and the gas-ballast control (5). Six possible combinations of these controls allow for a wide choice of operating characteristics so you can optimize the performance of the puinp for a given application.

Mode selector

The mode selector has two positions; refer to Section 4.1 to select these positions. Throughout the rest of this manual, the following convention is used:

•      The High Vacuum mode is specified by the symbol.

•      The High Throughput mode is specified by thea symbol.

With the mode selector set to High Vacuum mode ‚pressurised oil is fed to the low vacuum stage only. In this mode of operation, the pump provides the best possible ultimate vacuuin.

With the mode selector set to High Throughput mode ‚pressurised oil is fed to the high vacuum and low vacuum stages. In this mode of operation, the pump cart sustain long-term high inlet pressures.

Gas-ballast control

To puxnp high vapour loads, gas-ballast is delivered into the pump to prevent condensation of the vapour carned by the pumped gases.

Air can be introduced to the low vacuum stage through the gas-ballast valve. Alternatively, an inert gas such as nitrogen can be supplied through a suitable extemal valve.

The gas-ballast control has three positions:

•      Closed (position ‘0‘)

•      Low flow (position ‘I‘)

•      High flow (position ‘II‘).

Construction

The pump-shafts and rotors are made of high-grade cast-iron. The pump-body and oil-box are made from cast-aluminium. All surfaces of the pump which are exposed to the pumped gases are free from copper, zinc and cad.mium.

Other materials of construction include fluorocarbon elastomer, nitrile, silicon, chemically­resistant polymers, nickel and stainless steel.

Mechanical data General

Degree of protection (IEC 34-5: 1981)                                      IP44 (single-phase pumps)

                                                                                                 IP54 (three-phase pumps)

Maximum tilt angle                                                                    10°

Motor rotational speed (50 Hz supply)                                      1470 r.min -1

Motor rotational speed (60 Hz supply)                                      1760 r.min -1

                                                                                                  RV8

Maximum mass, without oil (kg)                                               26.0

Noise and vibration data

Sound pressure, measured at ultimate vacuum 1 metre from 1-phase        3-phase

the end of the pump to ISO 11201, High Vacuum mode,

50 Hz operation                                                                       48 dB (A)        50 dB(A)

Vibration severity: measured at the inlet port to ISO 2372 (1974) Class 1C Class 1C

Groupe de produits: Pompes à vidé

Impossible de trouver des produits correspondants à votre sélection.
Back to Top
part-of-labexchange-group
Recherche propulsée par ElasticSuite
Labprocure