Dynex Opsys MW8
Objektnummer | B00013211 |
---|---|
Numéro d'identification | 013211 |
Nom de l'objet | Dynex Opsys MW8 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The Opsys MW TM is an economical, full-featured 96-well microplate strip washer that complements the Opsys MR TM microplate reader. The Opsys MW TM is an excellent choice for many laboratories because of its simplicity, ease-of-use, flexible and intuitive protocol definition, and options for 12-way (row) or 8-way (column) microplate washing for full plates or strips.
The Opsys MW TM is a microprocessor-controlled microplate washing system that performs wash protocols that are defined by the user. lt is designed to wash all of the wells in one column or one row of a 96-well plate at once. The washing protocol can be programmed so that all of the columns (or rows) are washed in the saure manner, or different wash cycles can be appiied to specified columns (or rows) on the plate.
Flexibility
The Opsys MW provides a surprising amount of flexibility for its size and price. User-definable plate types and wash protocols provide significant versatility.
¨ You can wash whole or partial plates by row or column with interchangeable 8-way and 12-way wash heads.
¨ Combine prime, dispense, soak and aspirate steps in any order, defining the duration and repetition of each protocol step. Soak times can range from 1 to 999 seconds.
¨ Define, name, save and password-protect up to 10 microplate definitions.
¨ Define, name, save, copy and password-protect up to 40 wash protocols.
¨ Control how vigorously the Opsys MW cleans the bottom of each well by choosing the precise wash head height you need.
Performance
The Opsys MW TM provides consistent results with low well-to-well variation. Sweep mode aspiration provides minimal residual volume on flat bottom microplates.
¨ Dispense precision of 5% CV for 96 wells, using 300 µL of distilled water.
¨ Sweep mode aspiration provides a "sweeping" wash head movement during aspiration to achieve reproducibly low residual volumes.
¨ Low residual aspirate volumes of <1 µL for U, V, and C bottom microplates; and <5 µL for flat bottom plates (with sweep mode).
¨ On-board seif-diagnostic routines automatically assure that the Opsys MW is functioning properly each time it is turned on.
Convenience
The Opsys MW provides key features that simplify setup, protocol definition, operation, and cleanup.
¨ Compact dimensions conserve valuable bench space.
¨ 8-way and 12-way wash heads can be quickly and easily interchanged to wash full or partial microplates by row or colu nn.
¨ A "show" function provides quick verification of wash head height settings when defining a wash protocol.
¨ Notification to user when the waste bottle is full.
Features
The Opsys MW TM system has a number of performance and convenience features. These are summarised below:
¨ Small footprint
¨ Up to 40 wash protocols can be programmed
¨ Up to ten plate types can be programmed
¨ Two wash head configurations (1 x 8 and 1 x 12)
¨ On-board seif diagnostics
¨ SHOW function allows visual verification of wash head height settings
¨ High-Ievel alarm an Waste Container
Programming
All wash protocols on the Opsys MWTM Microplate Washer are userdefined. Up to 40 wash protocols can be contained on the system.
Note: Memory limitations may restrict the size and complexity of an individual wash protocol.
In addition, the system can be configured with up to ten different plate types so that the wash head positions for each plate type can be specified.
Programming of a new wash protocol (or modifying an existing one) and configuration of the system are carried out using the keypad and display.
Specifications
Dimensions and Weight
Length 49 cm (19.3 in)
Width 38 cm (15.0 in)
Height 19 cm (7.5 in)
Weight 9.1 kg (20 Ibs)
Operation
Dispense Range 50 999 µL
Dispense Precision 5% CV (with 300 µL distilled water)
Residual Aspirate Volumes < 1 µL for U and V bottom plates
< 5 µL for flat bottom plates
Washing Time Typical 5 cycle wash: 5 min 30 sec
Power < 100 W
Display 2 by 20 character back lit LCD
Keypad 21 key tactile membrane
Output Display, Printer, RS232
Environmental
Operating Range 15° C to 30° C
15% to 85% relative humidity (non-condensing)
2000m altitude
Computer Interface
Port Serial RS-232 port (Service Access)
Baud Rate 19200. Character format
Character Format 7 data bits, 1 stop bit, no parity
Power Requirements
Voltage Power Frequency
Main Unit 100 - 240 V 200 VA 50/60 Hz
Line Voltage Variation ± 10%
Line Frequency Variation ± 3 Hz
Input Ranges
Assay Programming
Assay Name Up to 10 characters
Password Up to 8 characters
Move: Start Strip 1 - 8 for 1 x 8 heads and 1 - 12 for 1 x 12 heads (Increment: 1)
Move: End Strip 1 - 8 for 1 x 8 heads and 1 - 12 for 1 x 12 heads (Increment: 1)
Move: #Cycles 1 - 9 (Increment: 1)
Aspirate: Cycles 1 - 9 (Increment: 1)
Dispense 50 - 999 (Increment: 1µL)
Purge 50 - 9999 (Increment: 1 µL)
Fill 50 - 300 (Increment: 1µL)
Soak 1 - 999 (Increment: 1 second)
Plate Setup
Plate Name Up to 10 characters
Dispense Height 001 - 999 (Increment: 1)
Top of Well Height 001 - 999 (Increment: 1)
Aspirate Height 001 - 999 (Increment: 1)
Sweep Height 001 - 999 (Increment: 1)
Sweep Stroke 001 - 999 (Increment: 1)
Bottom Wash: Dispense 001 - 999 (Increment: 1) Height
Standards
The instrument is designed in accordance with CSA 1010.1-92, UL 3101-1, EN61010-1 and EN61326.