Dionex AS 50
Objektnummer | B00017594 |
---|---|
Numéro d'identification | 017594 |
Nom de l'objet | Dionex AS 50 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
manufacturer : Dionex
model : AS 50
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The Dionex Autoselect AS50 Autosampler precisely delivers from 1.0 to 99.9 µL (in 0.1 µL increments) or 100 to 1000 µL (in 1 µL increments) of sample to an injection valve.
Two types of trays are available for sample vials: one for 2 mL vials and one for 10 mL vials. During sampling, the tray remains stationary and a sampling needle arm moves from vial to vial. Up to 99 injections can be taken from each vial.
The AS50 can be controlled locally, from the front panel keypad and display, or remotely, from a Dionex workstation. The workstation consists of a computer with a Dionex DX-LAN Interface card and PeakNet software installed. Limited remote control is also available, using TTL and relay signals.
The AS50 can be configured with PEEK flow paths and components for ion chromatography (IC) applications, or with stainless steel flow paths and components for high-performance liquid chromatography applications (HPLC).
Control Panel
The control panel contains a liquid crystal display (LCD) and membrane keypad (See Section 2.2). The control panel permits manual control of all AS50 functions.
Autosampler Compartment
The autosampler compartment contains a stationary sample vial tray and a sampling needle arm that moves from vial to vial during operation (see Section 2.3).
Sample Temperature Control Option (Not Pictured)
The optional sample temperature control unit mounts under the autosampler and provides uniform heating and cooling of the vial tray. See Seetion 2.3.2 for details.
Syringe and Reservoir Organizer
The organizer an top of the autosampler Nolds the sample syringe, the flush liquid reservoir, the optional prep syringe, and the optional reagent reservoir(s). See Section 2.4 for details_
Chromatography Compartment Option
The optional chromatography compartment houses the components required for a single- or dual-column chromatography system. The components, such as the analytical column(s), cell(s), and suppressor(s), raust be ordered separately from the AS50. See Section 2.6 for details.
Thermal Compartment Option
A version of the chromatography compartment is available that provides heating and cooling of the chromatography components. See Section 2.6.2 for details.
Injection Valve
When the AS50 is configured without a chromatography or thermal compartment, the injection valve is installed in the autosampler compartment. When the AS50 is configured with one of the compartments, the injection valve is installed in the compartment. See Section 2.5 for details.
Specifications Autosampler
Electrical
Main Power 100 Vac to 240 Vac, 50/60 Hz; 6 amps. The AS50 power supply is main voltage auto-sensing and requires no adjustment.
Fuses Two 3.15 amp fast-blow IEC127 fuses (P/N 954745)
Environmental/Physical
Ambient Operating 10 °C to 40 °C (50 °F to 104 °F)
Temperature
Operating Humidity 10% to 95% relative humidity, non-condensing
Decibel Level <60 db (at "A WEIGHING" setting)
Dimension 58 cm high x 30 cm wide x 46 cm deep (23 in x 12 in x 19 in)
Weight < 30 kg (< 65 Ib )
Valses (Optional)
Injection Two-position, six-port, electrically-activated Rheodyne valve
IC version: PEEK with Tefzel® rotor seal
HPLC version; Stainless steel with Vespel® rotor seal
Column Two-position, ten-port, elecnicaLly-activated Rheodyne valve
Switching IC version: PEEK with Tefzel rotor seal
HPLC version: Stainless steel with Vespel rotor seal
Injection
Injections Per 1 to 99
Vial
Vial Sizes 0.3 mL polymer vials (P/N 055428, package of 100)
Available 1.5 mL glass vials (P/N 055427, package of 100)
10 mL PolyVials (P/N 055058, package of 100)
Variable Volume 1 to 100 µL in 0.1 µL increments
Range 100 to 1000 mL in 1 µL increments
Injection
Size HPLC version: 20 µL standard; other sizes are available
Sample Temperature Control Unit (Optional)
Temperature 4 °C to 60 °C in 1 °C increments at 24 °C (75 °C) ambient, stable to
Operating 5% to 90% relative humidity, noncondensing
Humidity Cooling capacity is slightly reduced at high humidity
Dimensions 65 cm high x 30 cm wide x 46 cm deep (2.75 in x 12 in x 19 in)
(Sample Temp. +
Autosampler)
Weight <38 kg (<81 lb)
(Sample Temp. +
Autosampler)
Chromatography Compartment (Optional)
Dimensions 50 cm high x 17.5 cm wide x 40 cm deep (20 in x 7 in x 16 in)
Weight 9 kg (20lb)
Thermal Compartment (Optional)
Dimensions 50 cm high x 173 cm wide x 40 cm deep (20 in x 7 in x 16 in)
Weight 18 kg (40lb)
Temperature 10 °C to 40 °C in 1 °C increments, stable to ± 0.2 °C
(IC Mode)
Temperature 10 °C to 80 °C in 1 °C increments, stable to ± 0.2 °C
(HPLC Mode)
Ambient 10 °C to 40 °C (50 °F to 104 °F)
Operating
Temperature
Delay Volume < 100 µL