Dani 86.50
Objektnummer | B00011542 |
---|---|
Numéro d'identification | 011542 |
Nom de l'objet | Dani 86.50 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Dani
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
DESCRIPTION
DANI HSS 86.50 Head Space sampler is a single compact cabinet including:
· The Sampling System
· The Programmer
· The Pneumatic System
The Sampling System
The sampling system is consisting of three main devices:
· The sample vial tray
· The thermostated oven
· The Head space gas transfer device
The sample vial tray
The sample vial tray with 44 seats, is Iocated an the left side of the cabinet and it is driven by a DC motor. The standard vial volume is 20 ml, but the use of special adapters allows the sampling of 10 mI volume vials.
The thermostated oven
The thermostated oven contains a six seat rotating plate vial holder . The maximum operative temperature is 200°C, with an increment of 1°C.
The vial transfer system consists of a mobile fork carried on a bridge. This transfer system withdraws the set vial from the vial tray seat and drops it into the thermostated oven, through an inlet/outlet hole, placed at the top of the oven.
The thumbscrew allows the opening of the oven upper cover.
During the incubation time, the vials can be shaked. The left lateral panel can be removed to accede to the electronic boards.
The Head Space gas transfer device
The Head Space gas transfer device is based on the "VALVE and LOOP" System and it is housed in a thermoinsulated box. The sampling probe, the switching valve and the loop build up the manifold; it is temperature controlled and can operate at a maximum temperature of 200°C, with an increment of 1°C. The transfer of the gas Sample, from the 86.50 to the gas chromatograph, is performed by means of a heated transfer tube. The manifold and the transfer tube are heated to prevent cold spots. At the bottom left side of the unit, the program panel is placed.
On the top of the cabinet are located:
- The Carrier gas pressure reducer knob
- The Auxiliary gas pressure reducer knob
The Programmer
Fully microprocessored, it provides the complete control of the sampling System allowing up to four preprogrammed analytical methods. The analytical method includes all the parameter values (temperatures, incubation time, number of repetitive analysis an the same sample etc.) and the valve timing of all the operative steps (pressurization, sampling, venting etc.).
The PANEL is divided in three sections:
· Valve timing section
· Display section
· Control key section
The valve timing section
The valve timing section allows the Operator to set-up the valves actuation in an analytical cycle.
The display section
The display section includes sixteen alphanumeric characters.
The control section
The control section includes seven keys and live status lamps.
The Pneumatic Circuit
The HSS 86.50 sampling system, consists of a "valve and loop" device, which allows to inject into the GC a precise and known amount of the gas phase contained in the sample vial.
Gas Lines
The gas line feeding the unit is divided in two streams:
- CARRIER including a pressure regulator, the output of which is connected to the port 4 of the switching valve.
- AUX including a pressure regulator, a restrictor, the output of which is connected to the electrovalve "PRESS" and then, through a Tee connection, to the electrovalve "VENT" and to the port 2 of the switching valve.
Pressure evaluation of both gas Iines is provided by an electronic pressure transducer with readout an the display.
Technical Specification
DANI HSS 86.50 HEAD SPACE SAMPLER VIALS
Number of vials 44
Vial material neutral glass
Vial volume 20 ml
10 mI (with adapter)
Vial septa PTFE coated butyl rubber
PTFE coated silicon rubber
Vial aluminium ring
OVEN
Temperature range 15°C above room temperature to 200°C, 1°C increment
Accuracy 0.5 % full scale
Stability ± 0.5°C
Heating electrical, with forced air
MANIFOLD
Temperature range 15°C above room temperature to 200°C, 1°C increment
Accuracy 1.0% full scale
Stability ±0.5°C
Heating electrical
Sampling Valve MV 65/106 HT, 6-port valve
Sampling loop 1 mI volume, nickel
3 ml volume, nickel (optional)
TRANSFER TUBE
Temperature 15°C above room temperature to 220°C, 1°C increment
Accuracy 2.0% full scale
Stability ± 0.5°C
Heating electrical
OVEN CAROUSEL
Number of vials 6 seats
Shaking SOFT, oven stepping motor: 100 steps/sec.
FAST, oven stepping motor: 200 steps/sec.
PROGRAMMER
Microprocessor 8 bit
Control keys START,RESET,LOCK,SET,ACT,UP,DOWN
Operation leds WAIT,READY,AUTOSTART,RUN,LOCK
Valving timing keys and relevant leds : PROBE,PRESS,VENT,VALVE,TEST
DISPLAY
16 character alphanumeric display
PRESSURE CONTROLS
Pressure regulator with digital pressure readout
CONTROL INTERFACES
RS 232 serial communication
BCD output of sample number
CONTROL SIGNAL
Output remote start
AUTODIAGNOSTIC TEST
RAM
ROM
OVEN PROBE
VALVE PROBE
TUBE PROBE
CARRIER PRESSURE
AUXILIARY PRESSURE
UTILITIES
Power supply 220 V (± 10%), 50 Hz, 600 VA
115 V (± 10%), 60 Hz, 600 VA
Fuses 3.15 AT, 250 V (220 V)
6.30 AT, 250 V (115 V)
DIMENSIONS AND WEIGHT
Dimensions 42Wx47.4Hx61.7D cm
Weight 32 Kg