Dade DAC II
Objektnummer | B00013292 |
---|---|
Numéro d'identification | 013292 |
Nom de l'objet | Dade DAC II |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
1-1: Dade Automatic Centrifuge II
Functional Description
The Dade® Automatic Centrifuge II is a laboratory bench-top, multi-purpose, electromechanical instrument designed to perform cell washing and immunohematology procedures including cell resuspension. lt provides the laboratory with a fast wash cycle capability, thereby lowering laboratory time costs. lt can be easily programmed to automatically perform one, two, three, four or five wash cycles per test sequence. Each cycle consists of programmed saline introduction and subsequent decanting during centrifugal rotation. The System provides a saline monitoring feature to warn the Operator when saline is not being delivered. The centrifuge incorporates variable spin times for several different types of centrifuge operation. Decant RPM is Operator adjustable to give more than 0.1 mL residuals if desired.
An agitation cycle resuspends cells for approximately 5 seconds and then spins the cells for 20 seconds before completion of the cycle. The agitate time, as well as spin after agitate time, is operator-programmable. The front control panel (See Figure 1-2) contains a vacuum fluorescent display of RPM functions and time which allows the operator to continually monitor the status of instrument operation.
Physical Description
The centrifuge is a self-contained Instrument 14.5 inches (36.8 cm) high, by 12.75 inches (32.4 cm) wide, by 16 inches (40.7 cm) deep, and weighs approximately 43 pounds (20 kg). lt is mounted on a heavy metal base with two adjustable front feet and two stationary rear feet. A power cord with a threepronged plug provides primary power to the unit.
The microprocessor-controlled electronics portion of the instrument consists of the Control and Display Printed Circuit (PC) Board. This PC Board coordinates the Operation of the instrument control panel and keyboard, electronic detectors, and control elements throughout the instrument. The board also visually displays the motor RPM, wash count or function and time through the three display view windows located on the front control panel. An "end of cycle" is signaled by an audible signal.
The four basic assemblies or components that comprise the mechanical portion of the instrument (see Figure 1-3) are as follows:
A. Centrifuge inner bowl - The centrifuge inner bowl houses the centrifuge rotor with 12-tube carrier. Access to these components is gained by opening the centrifuge top cover. The inner bowl is easily removed for cleaning. Warning: After replacing the removable bowl, and before installing the rotor, rotate the rotor drive by hand until it turns freely. The saline dispensing adapter, located on the top and inside of the centrifuge cover, is connected to the saline pump by the saline output tubing (see Figure 1-3). The saline drain outlet is located at the rear of the centrifuge bowl and extends out of the rear of the instrument. An overflow drain is located just above the normal drain fitting.
B. Centrifuge rotor - The centrifuge rotor has a capacity of 12 test tubes of either 10 x 75 mm or 12 x 75 mm size. All loadbearing components are manufactured from high grade, corrosion-resistant stainless steel. The rotor may be removed from the instrument by grasping the upper collar of the rotor and lifting. The centrifuge rotor can be placed either on a bench top or in a water bath, as the bottoms of the tube carriers act as supports.
C. Test tubes - Either 10 x 75 mm or 12 x 75 mm glass test tubes can be used in the rotor. Use of a 10 mm adapter (P/N S23265-001) in each tube carrier is required for 10 x 75 mm test tubes.
D. Control panel - The control panel (also referred to as the operator's panel or front panel) is equipped with a vacuum fluorescent alphanumeric readout display of RPM functions and time which allows the Operator to continually monitor the status of instrument Operation. All panel switches are the tactile type, activated by applying finger pressure to the embossed panel surface. A "rocker" power switch is mounted through the front panel.
1-3: Dade Automatic Centrifuge II Wash Enclosure, Bowl and Rotor
Performance Characteristics
The Dade® Automatic Centrifuge II encompasses the following performance characteristics:
The instrument can be programmed to perform one, two,
three, four, or five wash cycles per test sequence.
Spin function can be selected for a preset spin time of 20
seconds.
Manual Operation of the instrument allows for variable spin
times up to a maximum of 9 minutes 59 seconds.
An agitation function is provided for resuspension, then
centrifugation of the resuspended mix.
Front panel keys are tactile type.
RPM, Function and Time readout displays permit constant monitoring of instrument Operation.
An audible signal accompanies the end of all test programs.
The centrifuge Iid interlock prevents instrument Operation if the centrifuge cover is open.
Decant RPM is operator-adjustable for a dry (790 RPM) or wet (750 RPM) cell button.
The centrifuge lid lock prevents operator from opening cover during instrument operation.
The instrument is automatically grounded when connected to properly grounded power source.
Saline volume is microprocessor-controlled.
All programmed functions last selected and entered via the ENT key will be retained even after power is turned off.
Specifications
The specifications listed below are subject to change without notice to allow the introduction of design improvements.
Automatic controls
Rotating
Radius
Speed approx. Time
Auto * Wash 0-3200 RPM N/A 4 sec.
Wash * Fill 3000-3200 RPM 9.2 cm (925-1050 rcf) 16 sec.
Sequence * Pack 3000-3200 RPM 9.2 cm (925-1050 rcf) 14 sec.
* Pause 3200-0 RPM N/A 10 sec.
* Decant 750-790 RPM 4.8 cm (19-34 rcf) 9 sec.
Auto * Spin 3000-3200 RPM 9.2 cm (925-1050 rcf)
Spin
Auto * Agitate N/A (5 second agitation
Agitate & 20 second spin) 25 sec.
Manual Controls
Rotating
Radius
Speed approx. Time
* Spin 3000-3200 RPM 925-1050 rcf Programmable
(1 second - 9 minutes
59 seconds)
* Agitate N/A - Programmable
(1-9 seconds)
* Spin after 3000-3200 RPM - Programmable
agitate (1 second-2 minutes
55 seconds)
Electrical
Catalog No. B5054-2X
* Volts 220-240 VAC
* Amperage (max.) 1.5A
* Cycles 50 Hz
Physical
* Height 14.5 in. (36.8 cm)
* Width 12.75 in. (32.4 cm)
* Depth 16.0 in. (40.7 cm)
* Weight 43.0 Ibs. (20.0 kg) approx.
* Shipping weight 58 Ibs. (26.3 kg) approx.