CEJ 510-4
Objektnummer | B00012750 |
---|---|
Numéro d'identification | 012750 |
Nom de l'objet | CEJ 510-4 |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
MIKROKATOR
The Mikrokator is an instrument for measuring differences
in length. The Mikrokator principle greatly magnifies any
deviation in size so that even small deviations produce
large deflections of the pointer over the scale. The transference
of movement from the measuring tip to the pointer
is mechanical, completely frictionless and free from backlash.
A wide range of models are available, which
gives graduations varying between .0001
(.005 mm) and .00002 (.0001 mm).
The unique Twisted Strip principle on
which all Mikrokators are based, provides
many features which are not available on
any other measure instrument.
C E J O H A N S S O N E N G I N E E R I N G A B A C O M P A N Y I N T H E H E X A G
STANDARD MIKROKATORS
CE Johansson Mikrokators are available in both metric and imperial type.
MIKROKATOR METRIC TYPE |
|
|
|
||
No. |
Shank |
Scale |
Scale |
Mean |
Variation of |
|
Ø |
Range |
Division |
measuring |
measuring |
|
mm |
m |
m |
pressure |
pressure |
|
|
|
|
approx.gr |
approx. gr |
500A-2 |
8 |
400 |
5 |
100 |
70 |
500A-3 |
8 |
200 |
2 |
75 |
40 |
500A-4 |
8 |
100 |
1 |
75 |
35 |
500A-5 |
8 |
50 |
0,5 |
75 |
25 |
500A-7 |
8 |
30 |
0,2 |
75 |
25 |
509-4 |
30 |
200 |
1 |
250 |
100 |
509-7 |
30 |
40 |
0,2 |
250 |
55 |
510-3 |
30 |
100 |
2 |
250 |
45 |
510-4 |
30 |
60 |
1 |
250 |
35 |
510-5 |
30 |
36 |
0,5 |
250 |
30 |
510-7 |
30 |
20 |
0,2 |
250 |
30 |
510-9 |
30 |
6 |
0,1 |
250 |
30 |
MIKROKATOR IMPERIAL TYPE |
|
|
|
||
No. |
Shank |
Scale |
Scale |
Mean |
Variation of |
|
Ø |
Range |
Division |
measuring |
measuring |
|
mm |
inch |
inch |
pressure |
pressure |
|
|
|
|
approx.gr |
approx. gr |
500EA-2 |
8 |
,0160 |
,0002 |
100 |
70 |
500EA-3 |
8 |
,0080 |
,0001 |
75 |
40 |
500EA-4 |
8 |
,0040 |
,00005 |
75 |
35 |
500EA-5 |
8 |
,0020 |
,00002 |
75 |
25 |
500EA-6 |
8 |
,0012 |
,00001 |
75 |
25 |
509E-4 |
30 |
,0100 |
,0005 |
250 |
100 |
509E-55 |
30 |
,0020 |
,0002 |
250 |
55 |
510E-2 |
30 |
,0060 |
,0001 |
250 |
80 |
510E-4 |
30 |
,0024 |
,00005 |
250 |
35 |
510E-5 |
30 |
,0014 |
,00002 |
250 |
30 |
510E-6 |
30 |
,0008 |
,00001 |
250 |
30 |
510E-8 |
30 |
,0002 |
,000002 |
250 |
30 |
MIKROKATOR METRIC TYPE |
CEJ ART . NO |
500A-2 |
8300-02102 |
500A-3 |
8300-02103 |
500A-4 |
8300-02104 |
500A-5 |
8300-02105 |
500A-7 |
8300-02107 |
509-4 |
8307-05004 |
509-7 |
8307-05007 |
510-3 |
8308-05003 |
510-4 |
8308-05004 |
510-5 |
8308-05005 |
510-7 |
8308-05007 |
510-9 |
8308-05109 |
MIKROKATOR IMPERIAL TYPE |
CEJ ART . NO |
500EA-2 |
8300-52002 |
500EA-3 |
8300-52003 |
500EA-4 |
8300-52004 |
500EA-5 |
8300-52105 |
500EA-6 |
8300-52106 |
509E-4 |
8307-55004 |
509E-55 |
8307-55005 |
510E-2 |
8308-55002 |
510E-4 |
8308-55004 |
510E-5 |
8308-55005 |
510E-6 |
8308-55006 |
510E-8 |
8308-55008 |
MIKROKATORS SPECIAL FEATURES
To obtain the best possible measuring results it is often desirable to use instruments
having special features. The Mikrokator can be provided with a wide variety of special
arrangements indicated by the prefix letters listed below. These prefix letters should be
used when ordering.
F Overtravel
1.0mm on 500
0.5mm on 510 and 509
Standard on all 500 and 510-9
Supplied as optional extra on all other Mikrokators
Z Zero-Adjusting Screw
Standard on all 500
Supplied as optional extra on all 509 and 510
P Adjustable measuring pressure 0 1200g
Supplied as optional extra on all 509 and 510
7V Adjustable measuring pressure 30g 1200g
Only available for Mikrokator 509-7, 509E-55 and 510-4
to 510-9 with visible scale on shaft.
C 3/8 Shaft
Only available for Mikrokator 500(E) serie
When measurements are being taken on fragile materials a low
measuring pressure is essential to avoid damage or indentations.
The above special features has been developed for this purpose.
MIKROKATOR ACCESSORIES
J O H A N S S O N A B A C O M P A N Y I N T H E H E X A G O N G R O U P
The Mikrokator is an instrument for measuring
differences in length. The Mikrokator principle
greatly magnifies any deviation in size so that
even small deviations produce large deflections
of the pointer over the scale. The transference
of movement from the measuring tip to the
pointer is mechanical, completely frictionless
and free from backlash.
MIKROKATOR STANDS
High Precision Comparator Stands, extremely robust to provide required stability.
Rapid and convenient fine adjustment with extreme sensitivity. Chrome-plated and
ground column. Base of cast iron.
For Mikrokator 509 and 510
With measuring arm suitable for instruments
with shank diameter 30 mm.
Supplied with measuring table 8321-01013.
Max. measuring height between table
and measuring tip 180 mm.
Max. measuring depth 80 mm.
Weight 11 kg.
B318-0 1003
For Mikrokator 500
With measuring arm suitable for instruments
with shank diameter 8 mm.
Supplied with measuring table 8321-01013.
Max. measuring height between table
and measuring tip 190 mm.
Max. measuring depth 80 mm.
Weight 11 kg.
B 318-0 1004
MIKROKATOR ACCESSORIES
Height Adjustment Adapter
For quick and accurate height adjustments.
The adapter also prevents the measuring
arm from turning round the column during
the height taverse which is very important
during differential measurements. The adapter
reduces the actual measuring height of the
stand by approximately 25 mm.
Lift arm for Mikrokator 509 and 510
Mount on the Mikrokator shaft to lift the
measuring tip
Adjustable holder
For tables 8321-01013 och 8321-01003.
8321-01015
Adjustable Measuring Support
To be attached to the column of the stand to
provide a backstop, e.g. when measuring
cylindrical workpieces. Dimensions of support
plate 80x16 mm. Adjustment range 0-50 mm
behind the centre line of the measuring tip
.
Measuring Table 35x90x30mm
Provided with two measuring surfaces. One surface
is plain and the other is grooved with bars 0,6 mm
wide. Flatness of measuring surfaces 0,002 mm.
Material steel, hardened and stress relieved. Black
oxidised finish with lapped measuring surfaces.
Measuring Table 90x90x30mm
Provided with one measuring surface grooved
with bars 0,6 mm wide. Flatness of measuring
surfaces 0,002 mm. Material steel, hardened
and stress relieved. Black oxidised finish with
lapped measuring surfaces.
MIKROKATOR MEASURING TIPS
For Mikrokator 500
For Mikrokator 509 and 510