Biotest RCS Standard
Objektnummer | B00015150 |
---|---|
Numéro d'identification | 015150 |
Nom de l'objet | Biotest RCS Standard |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Applications
The Standard RCS Air Sampler is a convenient Instrument for measuring the concentration of airborne microorganisms.
Possible investigations include:
the general microbiological quality of ambient air
the efficiency of air treatment and air cleaning equipment
the effectiveness of decontamination measures
The Instrument can be used in the following areas:
food and beverage industries
packaging industry
pharmaceutical and medical device industries
. cosmetics industry
hospitals
public health offices
industrial hygiene
animal husbandry
Principle of Operation
The Biotest RCS Air Sampler operates on the impaction principle. The function of the air sampler is to deposit airborne microorganisms quantitatively onto a culture medium.
The air under examination is drawn into the sampler from a distance of at least 40 cm by means of an impeller. The air flow enters the impeller drum concentrically and in a conical form, is set in rotation, and the particles contained in the air are impacted by centrifugal force onto an agar medium. The air then leaves the drum in a spiral form around the outside of the tone of air entering the sampler. After sampling, the agar strip is incubated and the colonies are counted.
Due to its principle of operation and the geometric properties of the impeller system, the RCS Air Sampler exhibits a special volume characteristic. lt is therefore necessary to differentiate between the sampling volume (= total volume sampled) and the separation volume (= relevant volume for particle separation).
Sampling Volume
The air flow enters the impeller drum concentrically with a diameter of 2a and at velocity C ax , is deflected by the impeller blade and fed over the agar strip. The air flow exists via an annular gap with width b. The total sampling volume(v) can be determined through a point by point measurement of the velocity and angle of flow over the radius r and subsequent mathematical evaluation. This sampling volume is 280 I/ min at the Instrument speed of 4096 rpm. This sampling volume is the basic parameter for calculating the separation volume.
Separation Volume
The particles in the air flow between the impeller blade and agar surface are accelerated by centrifugal force and impacted onto the agar surface. However, only part of the total sampling volume is relevant for particle separation. This separation volume can be determined mathematically, whereby the height of the impeller drum is the most important parameter. This height (I min ) can be calculated for the separation of all particles contained in the total sampling volume. The basis for this is the resolution of a differential equation which describes the spiral flight path of the particles under the influence of the air flow velocity, the direction of flow and the centrifugal force that arises.
For a relevant particle diameter of 4 µm this produces a height (I min ) of 14 cm. However, since only 2 cm of 14 cm are available in the impeller drum as the separating height, separation is not effected from the total sampling volume but only from 1/7 of this.
Thus separation volume for the Instrument is 40 liters per minute based on an average particle diameter of 4 µm.
Technical Data
Sampling principle
The Biotest Standard RCS Air Sampler operates on the principle of impaction, whereby the air stream enters the unit at the front of the instrument and the airborne microorganisms are separated out onto the agar strip by centrifugal force.
Measurement range:
Min. 20 liters, max. 320 liters
Air flow rate (Separation Volume):
40 l/min
Memory locations:
5 memory locations for 0.5, 1, 2, 4 and 8 minutes, in ascending order.
Motor speed:
4096 min 1 (rpm)
Instrument deviation:
± 2 %
Power supply:
4x1.5 . Volt monocells (alkaline D cells, type LR20) or mains adapter 230 Volt /110 Volt.
Electrical power:
3 W
Materials:
Housing: chromium plated brass
Keypad: polyester; resistant to common disinfection agents
Impeller Made: aluminumautoclavable
Impeller drum: chromium plated brass; autoclavable
Weight:
approx 1,300 g (2.9 Ibs) with batteries
Miscellaneous:
Screw thread connection for floor plate
Infrared remote control sensor
Keypad with pressure keys and LED indicators
LED indicator for battery voltage
Protection cap p made from POM; autoclavable
Connection for mains adapter
CE Mark