Biotest RCS plus
Objektnummer | B00012936 |
---|---|
Numéro d'identification | 012936 |
Nom de l'objet | Biotest RCS plus |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Application
The Biotest RCS Plus Air Sampler is used to investigate the microbiological quality of ambient air, the functionality of air treatment equipment, and the effectiveness of decontamination measures. lt is used routinely in places where specified airborne microbial counts as prescribed by law or through individual standards may not be exceeded.
The RCS Plus Air Sampler provides a simple means of testing concentrations of airborne microbes. The RCS Plus Air Sampler has proved its value particularly in laminar flow areas and in sterile areas of industrial and hospital environments , where low concentrations of airborne microbes are to be expected. However, testing for airborne microbial counts can also be carried out in offices and at the workplace, i.e. making it possible to investigate the question of »sick building syndrome«.
Principles of Operation and Construction
The Biotest RCS Plus Air Sampler operates on the impaction principle. lt facilitates the quantitative separation of airborne microorganisms from sample volumes ranging from 10 to 1000 liters (1m 3 ).
The air stream enters the rotor at the front of the Instrument, is set into rotation by the movement of the fan, and separates microbes contained in the air onto the agar strip through centrifugal force. To prevent the occurrence of turbulence in the air inlet channel, the air outlet passage is directed to the rear, parallel with the Instrument. The air flows at a constant rate which is approximately 50l/min at a rotor speed of 6100 rpm.The Instrument can be calibrated to ensure that the sampling volume remains exact.
The Instrument is constructed with special attention to ergonomics. lt operates independently of a mains power supply using a 7.2 volt rechargeable nickel cadmium battery. The battery is easy to change through a door on the battery compartment at the rear of the unit.
Built-in electronic circuitry controls the speed and the running time of the motor and simultaneously monitors the battery voltage. Sampling volumes of Io, 20, 50,100, 200, 500 and 3000 liters have been permanently programmed into the Instrument. In addition, it is possible to enter three individually chosen sampling volumes of up to a maximum of 1999 liters. Operation of the Instrument is via a keyboard with integrated display which is situated within easy reach directly in front of the carrying handle, allowing it to be operated with one hand. An infra-red sensor is incorporated into the electronics which permits remote control of the Instrument. The Instrument provides various memory functions, giving the user a wide variety of important control and security functions.
The rotor, which contains the agar strip, is driven via a magnetic coupling flange. This enables it to be simply removed from the Instrument. For safety reasons, a stainless steel protection cap is situated over the rotor, without which the instrument cannot function.
The Instrument can be operated in a vertical or a horizontal position. For sampling in areas difficult to access, the instrument can be attached to a tripod by means of a threaded attachment in the base of the housing.
Technical Data
Sampling principle:
The Biotest RCS Plus Air Sampler operates on the Principle of impaction whereby the air
stream enters the rotor at the front of the instrument and the airborne microbes are separated onto the agar strip by centrifugal force.
Measurement range:
1-1999 liters (recommended measurement range 10-1000 liters)
Airflow-rate:
approx. 50 l/min
Instrument precision:
± 5%
Sample volume:
-7 volumes in memory in ascending order of 10, 20, 50,100, 200, 500 and 1000 liters 3 positions in memory, individual selectable from 1 to 1999 Iiters. The accuracy of sampling volume is achieved through calibration.
Rotor speed:
approx. 6100 rpm
Maximum allowable axial forte on rotor shaft:
30 Newtons
Power supply:
Rapid charging 7,2 V nickel cadmium battery (charging time 1 hour)
Automatic power-off:
The Instrument switches itself off automatically alter 8 minutes
Materials:
Housing : polycarbonate; resistant to 70% ethanol
Rotor: anodized aluminum; autoclavable
Protection cap: stainless steel; ; autoclavable
Weight:
approx. 1500 g with battery pack (3.3 Ibs)
Miscellaneous:
Operation via keyboard Panel with integrated display
Thread connection for tripod
lnfra-red remote control sensor
Can be calibrated using the Biotest Anemometer (traceable to PTB, Physikalisch Technische Bundesanstalt)
Errors indicated via display and acoustic signal
Memory function for residual sampling volume and last sampling volume processed