Becton Dickinson FACS Vantage
Objektnummer | B00010644 |
---|---|
Numéro d'identification | 010644 |
Nom de l'objet | Becton Dickinson FACS Vantage |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The FACS Vantage TM , BDIS's new cell sorter, was designed for ease of operation and provides ample room in which to work. With its stream-viewing video camera and monitor, an eight-trace oscilloscope, a wide selection of lasers, an optional third laser, FACS Vantage uses the latest technology in flow cytometry.
You can use FACS Vantage for research applications in:
Molecular Genetics to study
isolated chromosomes for developing chromosome-specific libraries
normal gene expression
abnormalities leading to disease
Cell Cycle Analysis to
quantify the proliferative characteristics of cells and cell populations
gain knowledge about the fraction of cells at risk from cell-cyclespecific cytotoxic agents, enabling maximal tumor killing and minimal normal cell death
quantify phase fractions, phase durations, doubling times, labeling index, and growth fractions by using modeln or bromodeoxyuridine as a marker for cellcycle traverse studies
employ the monoclonal antibody Ki-67, a nuclear antigen that is found in proliferating cells, but not in resting cells
perform leukemia phenotyping, monitor cancer remission, and analyze rare events in cancer studies
Intracellular Calcium Measurement to
measure intracellular ionized calcium concentration to learn about a cellular functions
correlate calcium concentration with other parameters, such as cell-surface antigen expression
sort, based an calcium concentration
Fluorescence In Situ Hybridization (FISH) to
label, locate, and quantify specific nucleic acid sequences in cells or chromosomes, alter sorting specific cells an FACS Vantage
enhance FISH techniques by adding the FACS Vantage spatial resolution, convenience, speed, and sensitivity
Large Particle Analysis and Sorting (using the available MacroSORT Option) to
characterize and sort islets of Langerhans for diabetes research including transplantation studies and encapsulation
measure nuclear genome sizes in higher plants by producing a suspension of cells without walls (protoplasts) and by measuring the DNA content
evaluate DNA content by studying megakaryocytes
Microbiology to
analyze changes in cellular functions brought about by intracellular organisms such as viruses, bacteria, and protozoa
study cell-cycle kinetics and regulatory mechanisms governing cell growth and replication
monitor (bacteria and other) microorganisms used in industrial processes or occurring as contaminants in materials ranging from drinking water to crude oil.
Optional Laser
Enterprise II Ion Laser
The Enterprise ion Laser consists of a water cooled Laser head and a switching regulated air cooled power supply. Enterprise is a small frame argon ion Laser available with multiple wavelength outputs including UV, UV/488 nm, and UV/488/515 nm outputs.
The Enterprise System can be remotely controlled by an external device via a connector an the power supply (remote operation), which accepts analog commands and provides analog Status outputs, or directly from the front panel of the power supply (local operation).
System Specifications |
||||||
MODEL |
OPERATING WAVELENTH(S) |
Output Power (mW) |
Beam Diameter (1) (mm) |
Beam Divergence(2) (mrad) |
Waist Diameter (2) (mm) |
Waist Location(2) (m) |
621 |
UV (351 to 364 nm) (3) 488.0 nm |
50 150 |
0.88 1.21 |
0.73 0.82 |
0.70 0.84 |
0.81 1.15 |
(1) Beam diameter is measured at the output coupler which is 8.5 cm behind the front faceplate of the laser head assembly.
(2) The long-radius output coupler acts as a weak lens to transform the output beam parameters. The values listed for beam divergence, waist diameter and location take into account this weak lens effect. The value for beam waist location is measured from the outside of the front faceplate of the laser head assembly.
(3) Primary wavelength(s) used for light regulation. When the UV power level is set for the specified value, the visible power levels may be significantly higher than the specified values.
(4) Other wavelengths may be present.
Beam Characteristics |
|
PARAMETER |
DESCRIPTION |
Power Stability(1) |
<1% long-term (primary wavelength) |
Beam Pointing Stability(1) |
<5 µrad/°C typical |
Optical Noise(2) |
<1% RMS (0.75% RMS/6% peak-to-peak typical) |
Mode/ Mode Purity |
TEM 00 / M 2 < 1.10 |
Polarization Ratio |
100:1 |
(1) Maximum peak variation over any 30 minutes period after a 15 minute warm-up. (2) Measured with a 10 Hz to 2 MHz photodiode driving a resistive load. May be slightly higher if operated with one side of input line at ground potential (neutral). |
Weights and Dimensions |
|||
|
LASER HEAD |
POWER SUPPLY |
UMBILICAL CORD |
Length |
76.2 cm (30 in.) |
50.2 cm (19.75 in.) |
(2.4 m) 8 feet |
Width |
18.6 cm (7.31 in.) |
43.8 cm (17.25 in.)(2) |
--- |
Height(1) |
17.1 cm (6.35 in.) |
19.1 cm (7.5 in.) |
--- |
Diameter |
--- |
--- |
2.54 cm (1.0 in) (3) |
Weight |
|
|
|
Crated |
43 kg (94 lb) |
42 kg (93 lb) |
|
Uncrated |
27 kg (59 lb) |
35 kg (78 lb) |
|
(1) Without feet. (2) Does not include handles. (3) Not including connectors. |