Sold

Thermo Jarrel Ash ICAP 61 E

Numéro d'identification: 008605
Statut : Stock unit
Preis auf Anfrage
Excl. 19% VAT , excl. Shipping Cost
siehe Storeview
Description:
Thermo Jarrel Ash Analyseur ICAP 61E Trace. Argon-Plasma ICP-OES. Software ThermoSpec 6.2. 3 Torches. 2 Meinhard Pulvérisateur. Pompe á vide. Unité de réfrigération. A.c.: 1993.
Quotation
siehe Storeview
Plus d’information
Objektnummer B00008605
Numéro d'identification 008605
Nom de l'objet Thermo Jarrel Ash ICAP 61 E
Statut Stock unit

Groupe de produits: Systèmes ICP

Impossible de trouver des produits correspondants à votre sélection.

Statut, conditions de livraison et de paiement

Vérification des appareils

Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.

 

Délai d'expédition

Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.

Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.

 

Méthodes d'expédition

Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange

 

Conditions de livraison

Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.

Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.

 

Modalités de paiement

Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.

Pays

Modalités de paiement possible

Remarque

DE, AT, CH

Paiement par facture, prépaiement, par carte de credit

Paiement par facture est possible pour clients professionnels.

NL, BE, LU

Paiement par facture, prépaiement, par carte de credit

Paiement par facture est possible pour clients professionnels.

Autre pays

Prépaiement, par carte de credit

 

 

Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.

La vente intermédiaire nous est réservée.

 

Défintion des statuts

Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».

Statut

Condition

Remarque

Immédiatement disponible

Occasion

L’article a été déjà entièrement vérifié et peut être envoyé directement à vous.

En stock

Occasion

L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels.

Publié

Occasion

L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison.

Appareil neuf

Neuf

C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable.

Labprocure

Occasion

Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma:              Thermo Jarrel Ash

Modell:            ICAP 61 E

Kommentar:   Dokumente engl.

INTRODUCTION

The Thermo Jarrell Ash ICAP 61E Trace Analyzer is a simultaneous plasma emission spectrometer. It consists of three modular components: (1) a computer controlled 0.75 meter polychromator capable of accepting up to 63 channels with a fully automated inductively coupled plasma emission source. (2) a floor mounted power unit which provides power to all other components and accessories, with the exception of the optional polychromator vacuum pump; (3) a data acquisition center, which includes the host computer and a printer, and a table on which to place them.

FIGURE 1-1: ASSEMBLED ICAP 61E TRACE ANALYZER SPECTROMETER SYSTEM

THEORY OF OPERATION

INDUCTIVELY COUPLED PLASMA EMISSION SOURCE

The emission source for the ICAP 61E Trace Analyzer spectrometer is an inductively coupled argon plasma (ICAP). The ICAP source is powered by a 2 kW crystal controlled radio frequency (RF) generator operating at 27.12 MHz. The output from the RF generator is coupled to a water­cooled copper induction coil that is wrapped around the outside of a quartz torch assembly.

The largest flow of argon (the coolant flow) passes between the outer and intermediate tubes of the torch. Smaller gas flows pass between the intermediate tube (auxiliary flow), and through the center tube (sample flow).

During plasma ignition, the gas stream is seeded with electrons from an external source, in this case a spark. These electrons are accelerated in a torroidal path by the RF electromagnetic field, and they collide with argon atoms to form more electrons and argon ions, which are in turn accelerated. This process continues until the gas becomes highly ionized (a plasma), at which point the discharge is stable and self-sustaining as long as the RF field is applied. The temperature within this torroidal plasma is as high as 10,000 K.

Liquid samples are introduced into the plasma discharge as an aerosol suspended in argon gas. This sample aerosol is carried through the center tube of the three quartz tubes that comprise the torch assembly. The sample aerosol stream passes through the center of the torroidal plasma discharge, where it is desolvated, atomized, and the resultant elements are excited. After excitation, the atoms that comprised the Sample emit light at their characteristic wavelengths. This light is transmitted to the optical system.

The inductively coupled argon plasma is close to an ideal excitation source. The plasma is inherently very stable over long time periods. It provides a high degree of excitation, resulting in a multiplicity of excitation lines from which to choose. The high density of free electrons ensures that the fraction of an element that is ionized remains constant despite the presence of various matrix constituents. The high temperature and long residence times inhibit anion interferences. The optically thin stream of Sample reduces self absorption to negligible proportions. As a result, the plasma exhibits a dynamic range of up to 6 orders of magnitude. This simplifies sample preparation and often makes serial dilutions unnecessary.

OPTICAL SYSTEM

Light from the plasma emission source is focused onto the entrance slit of the polychromator optical systems. After passing through the entrance slit, the light is dispersed by a diffraction grating. A narrow range of dispersed wavelengths pass through an exit slit and falls onto a photomultiplier tube (PMT) detector. The detector converts light energy to electrical current. The magnitude of the current is proportional to light intensity. The current is integrated over a predefined time period, and this integrated change is measured by the detector circuit and passed on to the host computer.

For the polychromator spectrometer, the wavelengths of light measured by the detectors are determined by the position of the exit slits and photomultiplier tubes on the focal curve. All photomultiplier tubes are read simultaneously.

COMPUTER SYSTEM

The host computer system controls collection of the integrated charge information at each channel and converts this value to concentration units. The host computer also controls the spectrum shifter mechanism, as well as many other parameters associated with the emission source and optical system. The host computer is also used to set up the analytical methods, and to store and retrieve analytical data.


Specification

PLASMA SOURCE:

2kW RF generator, crystal controlled at 27.12 MHz with automatic tuning, power stabilization feed-back loop, and direct coupling (no matchbox).

Built-in peristaltic pump.

Meinhardt concentric glass nebulizer.

Glass spray chamber.

Torch with demountable quartz center tube.

Controlled Parameters:

Output Power:             6 steps from 750 to 1750 W

Auxiliary Argon Flow:   4 steps from off to 1.5 L/min

Nebulizer Argon Pressure:     Continuously variable to 45 psi

Peristaltic Pump Rate:            Continuously variable to 200 rpm (0 to 2.5 mL/min with standard tubing)

COMPUTER SYSTEM:

IBM 386 AT compatible

NEC Pinwriter P2200XE printer, IBM Graphics, or HP Paintjet printer

ThermoSPEC - Spectrometer Operating System

POLYCHROMATOR OPTICS:

0.75 nm Rowland Circle, Paschen-Runge mount. 1510 or 2400 grooves/mm ruled grating at 500 nm

                                      2400 m/mm grating

Linear Dispersion:

First Order                     0.53 nm/mm

Second Order                0.26 nm/mm

Resolution:

First Order                     0.016 nm

Second Order                0.008 nm

Wavelength Range:

Vacuum                         170-500 nm

(Special channels are available for K, Li, and Na determinations with 2400 g/mm. grating).

SIZE AND WEIGHT:

Spectrometer:             69" W x 35" D x 54" H (176 x 89 x 136 cm)

                                    1500 lbs (680 kg) Vacuum

Power Supply.             13" W x 31" D x 24" H (32 x 79 x 61 cm)

                                    200 lbs (91 kg)

Host Computer:           48" W x 30" D x 46" H (122 x 76 x 117 cm)

                                    85 lbs (39 kg)

Part of labexchange logo
Recherche propulsée par ElasticSuite