Firma:                   Nicolet

Modell:                5 DXC

Kommentar:        Dokumente engl.

The Nicoles 5DXC is a powerful infrared spectrometer that is easy to install and simple to use. This is possible because of the multilevel Software system that allows you to gradually upgrade features of the system as your needs and experience increase.

The 5DXC spectrometer consists of the following components which must be cabled together before the spectrometer is operational.

- Nicolet 640 processor unit

- Nicolet high performance color display monitor

- Keyboard

- Digital plotter

- 5DXC optical bench

Components description

•     5 series optical bench.

The optical bench functions are controlled and implemented by simple Software commands. This allows fast, convenient switching of source aperture, Interferometer scan speed, spectral resolution and beam path geometry. The main Sample compartment features optional removable base plates for fast and accurate accessory interchange.

•     Nicoles 600 series processor.

This high-performance minicomputer provides extensive Signal processing, speed and computation power. The Standard processor comes with 640K bytes of RAM memory.

•     Two micro floppy disk drives

Two disk drives are provided an the processor front panel. These drives use 3 1 /2" micro floppies with storage capacities of approximately 600 Kbytes.

•     A 13 Inch color display monitor.

The display is a high resolution color monitor that can simultaneously display as many spectra as desired. To prevent data distortion when using the optional MCT detector, it is recommended that the display monitor be at least 12 Inches from the detector.

•     Keyboard

The keyboard has a separate Cursor movement pad and linear function keys. (The Status of the X and Y RESET and format function keys, which are located across the top of the keyboard, is indicated in the upper right Corner of the display.)

•     A 2-pen Hewlett Packard digital plotter.

This plotter provides accurate plotting and overlay capablity in a single sheet flatbed plotter.

or

•     A high-Speed. 8-pen Nicolet Zeta 8 digital plotter

The plotter provides accurate plotting and versatile hard copy formatting with continuous feed paper.

•     The DX FTIR and the NICOS (NIColet Operating System) software.

The software provides extensive data collection and manipulation features.

•     Auxiliary Experiment Modules. (Optional)

The Nicolet IR Microscope Experiment Module

This Compact, pre-aligned auxiliary System attaches directly to the side of a 5C series spectrometer bench and provides fast, non-destructive microanalysis with minimal sample preparation and alignment. A keyboard command switches the beam path from routine analyses to specialized experiments on the Microscope Module.

The Auxiliary Sample Bench

This bench connects to the side of the main spectrometer. It allows you to run routine analyses on the main bench and to quickly switch beam paths to the auxiliary sample bench for specialized experiments.

Microbeam

The microbeam sample compartment is designed for the microanalysis of Samples using transmission and/or internal reflectance techniques. The microbeam optics are Computer controlled for rapid sample focusing and configuration to various accessories.

5DXC SPECIFICATIONS

Dimensions

•     600 Series Processor: 45.72 cm (18") D; 54.61 cm (21.5") W; 16.51 cm (6.5") H

•     5 Serien Spectrometer Bench 65 cm (26") D; 85 cm (34") W; 27.5 cm (11 ") H.

•     Auxiliary Experiment Modulen: 62.5 cm (25") D; 37.5 cm (15") W -­122.5 cm (49") wich spectrometer; 32.5 cm (13") H.

•     Display: 40 cm (16") D; 37.5 cm (15") W; 33.75 cm (OS') H.

•     Keyboard: 21.25 cm (8.5") D; 50 cm (20") W; 5 cm (2") H.

•     Hewlett Packard Plotter: 33 cm (13") D; 42.5 cm (17") W; 11.25 cm (4.5") H.

•     Zeta 8 Plotter: 27.5 cm (11") D; 57.5 cm (23") W; 25 cm (10") H.

Power Requirements:

•     5 Serien Spectrometer Bench: .55 A @ 120 VAC = 66 W (225 Btu/hr)

•     600 Serien Processor: 225 W (770 Btu/hr)