Appl.Biosystems BioCad Sprint
Objektnummer | B00014150 |
---|---|
Numéro d'identification | 014150 |
Nom de l'objet | Appl.Biosystems BioCad Sprint |
Statut | Archiv |
Statut, conditions de livraison et de paiement
Vérification des appareils
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Délai d'expédition
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Méthodes d'expédition
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Conditions de livraison
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. Les frais de transport et d'emballage indiqués se réfèrent à l'itinéraire de transport le moins cher et sont sujets à des augmentations de coûts imprévues. En raison d'événements imprévisibles, les tarifs de transport et les délais de livraison peuvent changer à tout moment et doivent être adaptés à la situation actuelle. Incoterm codage selon les Incoterms 2010: Pour personnes qui viennent chercher les dispositifs elles-mêmes: EXW, pour les expéditions par voie maritime: CFR, par avion: CPT, d'autres expéditions: DAP. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Modalités de paiement
Nous n’acceptons pas le paiement par lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays |
Modalités de paiement possible |
Remarque |
DE, AT, CH |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
NL, BE, LU |
Paiement par facture, prépaiement, par carte de credit |
Paiement par facture est possible pour clients professionnels. |
Autre pays |
Prépaiement, par carte de credit |
|
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Défintion des statuts
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut |
Condition |
Remarque |
Immédiatement disponible |
Occasion |
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous. |
En stock |
Occasion |
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels. |
Publié |
Occasion |
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison. |
Appareil neuf |
Neuf |
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable. |
Labprocure |
Occasion |
Responsable du contenu de l‘offre d’appareil est la société Labprocure GmbH, comme annonceur. Labprocure assume la responsabilité des offres annoncées ici ainsi que des photos et des textes d’offre inclus. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Appl.Biosystems
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Overview PerSeptive Biosystems BioCAD SPRINT P TM P System for Perfusion Chromatography is a Computer-aided chromatography system that integrates all aspects of biomolecule purification with Perfusion Chromatography technology.
The BioCAD SPRINT System is designed for:
Chromatographic method executionRoutine execution of chromatographic methods for the purification and analysis of biomolecules.
Systematic method developmentThe goal of method development is to optimize conditions for your application. Systematic method development makes it easy to identify variables that affect your application, systematically change the variables, observe the effects, and use the Information to optimize chromatographic conditions.
Features The BioCAD SPRINT System provides the following features:
SimplicityMicrosoft® Windows°-based software
that is intuitive and easy to use. You can efficiently
develop and execute separations for analytical and
preparative applications.
Full Process CapabilityFull capability from sample injection through fraction collection, including automated column washing and regeneration.
SpeedChromatographic separations in as little as one to three minutes, when using POROS® media and columns.
VersatilityMultiple injection mode options.
Gradient CapabilitySix-buffer/solvent capability, with simultaneous blending between any four buffers/solvents.
DetectionMonitoring of pH, conductiviry, dual-wavelength UVNis absorbance, fluorescence (optional), and system pressure.
TemplatesPredefined templates for systematic method development of some variables such as columns and sample.
Data AnalysisData analysis of single data fites or groups of data fites.
ChromatoCADTM Scale-up Design System SoftwareTool for studying the effects of changing conditions in a process method (optional).
Biopharmaceutical Manufacturing SoftwareCompliance with FDA GMP requirements (optional).
SCOUT Column SelectorAutomated multi-column switching device that allows flow to be diverted to any one of six attached columns (optional).
Parts of the System
The BioCAD SPRINT System is shown in Figure 1-2.
The BioCAD SPRINT System includes:
Front panel indicators and controls
Buffer/solvent and pump system
Sample loader
Columns and plumbing
Detector and monitors
Fraction collection
Computer components
Indicators The front panel includes LED (light emitting diode) indicators:
Power On/OffIndicates status of system power
Pump On/OffIndicates status of pump
Event MarkIndicates Status of Event Mark control
Lamp On/OffIndicates status of UV/Vis detector lamp
Controls The front Panel includes push-Button controls:
Pump On/OffTurns pump an and off
Event MarkMarks the electronic strip Chart recorder manually with an MRK notation
Lamp On/OffTurns UV/Vis detector lamp an and off
General Specifications
Condition |
Specification |
||
Weight |
255 pounds (116 kg) |
||
Dimensions |
36 Inches (91 cm) deep, 72 Inches (183 cm) wide, 36 Inches (91 cm) high (space required for system, Computer monitor, keyboard, and buffers) |
||
Pumping system |
Dual piston, positive displacement with 6 inlets, pressure safety, and built-in seal flush |
||
Flow rate |
0.2-60 ml/min Accuracy is +/- 1% of setpoint or 0.05 ml/min (whichever is greater) |
||
Maximum system pressure |
3,000 psi (204 bar, 20.4 MPa) |
||
Gradient capability |
Up to six solvents, with low-pressure quaternary blending in Percentage, Eluent, or pH blend modes with 0.1% increments. |
||
|
Compositional accuracy: ± 1 |
||
Sample handling |
Four injection modest ManualEliminates prime volume, needle port adapter included PumpUnlimited volume loading Integrated Autosampler (optional)Inject from multiple samples, with complete control over autosampler functions Direct Wire Autosampler (optional)Inject from multiple samples, control autosampler from autosampler front panel |
||
Column sizes |
POROS° Perfusion Chromatography° columns-2.1 to 27 mm diameter Conventional chromatography columnsno limit an column size |
||
Column configurations |
One column NOTE: Use up to six columns with optional SCOUT Column Selector. |
|
|
Fraction collection |
Integrated control of optional external fraction collectors, which accommodate tubes or larger bottles. Tube-to-tube switching time is 0.1 seconds with the Advantec fraction collector. |
|
|
Materials |
Biocompatible and solvent-resistantPEEK, Teflon®, Kel F°, Kynar°, sapphire, stainless steel, aluminum Oxide, ruby |
|
|
Auxiliary Inputs and Outputs |
Inputs-2 TTL Outputs-2 TTL |
|
|
Auxiliary driver Outputs |
Spareout LC-12 V (0.25 A) Spareout HC-24 V (1 A) |
|
|
Detection Specifications
Condition |
Specification |
||
Pressure |
Transducer an pump discharge-0 to 3,000 psi |
||
Auxiliary Input |
12-bit A/D for additional detector |
||
pH probe |
Range-2 to 12 pH units Flow Gell volume-50 NI |
||
Conductivity probe |
Range-0 to 200 mS Flow cell volume-7 pI |
||
UVNisible |
Model 201 (single wavelength)-190 nm to 800 nm Model 205 (dual wavelength) 190 nm to 800 nm (single wavelength range) 190 to 450 nm OR 366 to 700 nm (dual wavelength ranges) Flow cells available: Analytical-6 mm path length, 9 NI volume, 45 ml/min flow rate maximum Semi-prep 3 mm path length, 4.5 pI volume, 100 ml/min flow rate maximum |
|
|
Miscellaneous Specifications
Condition |
Specification |
Computer |
Minimum internal Pentium/100 MHz, 1.2 gigabyte hard disk drive, 16 megabyte RAM Irandom access memory), 3.5" floppy disk drive, 14" Super VGA color monitor, keyboard, and mouse |
Options |
17" or 21" color monitor, laser and color printers, SCOUT Column Selector, external detector (UV/Vis or fluorescence), fraction collector, autosampler, 28.8K bps modern and remote control software, Supervisorr"" Software (stand-alone software version), Biopharmaceutical Manufacturing Software, ChromatoCAD Scale-Up Design System Software, and kits of selected POROS columns |