Javascript est désactivé dans votre navigateur. Pour une meilleure expérience sur notre site, assurez-vous d’activer JavaScript dans votre navigateur.
Dans la plupart des cas, les équipements de laboratoire et les systèmes d’analyse sont des appareils de très haut niveau technique, avec des spécifications et des exigences qui leur sont propres. Lors de la mise en service d’un appareil de laboratoire, bien souvent des questions se posent : comment monter et régler l’appareil, comment le mettre en route.
Nous serons heureux de prendre en charge de l’installation professionnelle de vos systèmes de laboratoire!S’il vous plaît contactez-nous
Profitez de nombreux avanatges avec l’installation par nous:
24 mois garantie légale des vices cachés
60 jours Labexchange Fullguarantee
Certificat de functionnement
Le droit de retour de Labexchange
Des services de garantie optionnels apportent encore plus une année
Installation optionnelle d’équipements pour une utilisation de l’appareil immédiate et en toute sécurité
Des offres de location et leasing attrayantes ménagent votre budget
Nous serons heureux de répondre à vos questions concernant cet appareil e rappel gratuite
Si vous achetez cet article d'occasion plutôt que neuf, vous économisez autant de CO2 qu'en roulant 410 km avec une voiture à essence.
La durée de la garantie légale pour nos appareils est de 24 mois à partir d’arrivage.
Tous les appareils d´occasion de Labexchange seront soumis, avant la livraison, à un controle technique, et ne seront livrés que s'ils fonctionnent parfaitement. La vérification et la fonctionnalité font l'objet d'un rapport de service après-vente établi par une société de service après-vente indépendante. La Labexchange Fullquarantee est d’au moins 60 jours à partir de la date d’arrivage. Dysfonctionnements qui se produisent pendant la période de garantie seront corrigés par nous gratuitement. (Valable pour les pays de l'UE et CH)
La vérification et le bon état de marche de nos appareils est confirmé, outre par le rapport du service après-vente, également par un certificat de functionnement.
Vous êtes sur le bon chemin avec nos systèmes delaboratoire et d’analyse usagés! Pour plus de sécurité lors de l’achat, nous vous accordons le droit de retour de Labexchange. Redonez votre système de laboratoire ou d’analyse facilement sans explication.
Les conditions d’affaires spécifiques s’appliquent:Labexchange Droit de retour
(https://www.labexchange.com/fileadmin/user_upload/pdf/downloads/en/Rueckgaberecht_08_18_E.pdf)
Sur demande, nous vérifierons la possibilité d’une extension de garantie pour votre appareil. Si possible, la période de garantie est de 6 mois pour un supplément de 10% et de 1 an pour un supplément de 20% sur le prix courant. (Valable pour les pays DE, AT, CH, FR, NL, BE, LU, GB et IR)
Allez en toute sécurité! Nous sommes heureux d’offrir l’installation de votre équipement de laboratoire. Nos techniciens qualifiés installent l’appareil à votre date souhaitée dans le laboratoire, afin que vous puissiez travailler rapidement et sûrement avec votre nouvel équipement de laboratoire.
L’installation de votre équipement de laboratoire par Labexchange apporte d’autres avantages. Vous obtenez une extension de garantie à 3 mois et vous avez le droit à la Labexchange Repurchase Guarantee. Vous recevez sensibles équipements de laboratoire et des systèmes d’analyse ainsi que la plupart des hottes de laboratoire disponibles, déjà y compris l’installation.
* Champs requis
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays
Modalités de paiement possible
Remarque
DE, AT, CH
Paiement par facture, prépaiement
Paiement par facture est possible pour clients professionnels.
NL, BE, LU
Autre pays
Prépaiement
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut
Condition
Immédiatement disponible
Occasion
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous.
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels.
Publié
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison.
Appareil neuf
Neuf
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable.
Modell: G 1377A
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Four models of Agilent 1100 Series well-plate sampler are available :
G1367A Well-plate sampler
G1368A Thermostatted well-plate sampler
G1377A Micro well-plate sampler
GI378A Thermostatted micro well-plate sampler
The Agilent 1100 Series well-plate samplers and Agilent 1100 Series thermostatted well-plate samplers are designed for use with other modules of the Agilent 1100 Series LC system, with the HP 1050 Series, or with other LC Systems if adequate remote control Inputs and Outputs are available. The wellplate samplers are controlled from the Agilent 1100 Series control module or from the Agilent ChemStation for LC.
The special-designed thermostattable sample tray for this Instrument holds 2 well-plates (shallow - or deepwell) and additional 10 x 2.0 ml vials. The format of the well-plates can be up to 384 wells per plate (on a footprint of 128x86 mm). The well-plate sampler can also handle 100 x 2 ml vials using the current trays for the Agilent Gl313/29A autosampler. There are Sensors to detect the presence of the tray.
The well-plate sampler transport mechanism uses an X-Z-theta robot to optimize the positioning of the sampling arm on the well-plate. Once the sampling arm is positioned over the programmed sample position, the programmed sample volume is drawn by the metering device into the sampling needle. The sampling arm then moves to the injection position where the sample is flushed onto the column.
The well-plate sampler employs a vial/plate pusher mechanism to hold down the vial or the plate while the needle is drawn back from the sample vessel (a raust in the case a septum is used). This vial/plate pusher employs a Sensor to detect the presence of a plate. All axes of the transport mechanism
(x-,z-,theta-robot) are driven by Stepper-motors. Optical encoders ensure the correct Operation of the movement.
The standard metering device (for the G1367A/68A) provides injection volumes from 0.1-100 µl. A multi-draw kit extends the range up to 1500 µl. The micro metering device (for the G1377A/78A) provides injection volumes from 0.01 - 8µl with the standard loop capillary installed and from 0.01 - 40 µl with the extended loop capillary. The metering device is always flushed by the mobile phase after injection for minimum internal carry-over.
An additional needle flush station with a peristaltic pump is installed to wash the outside of the needle. This reduces the already low carry-over for very sensitive analysis. The bottle containing the mobile phase for the wash procedure will be located in the solvent bottle cabinet. Produced waste during this Operation is channeled safely away through a waste drain.
The six-port (only 5 ports are used) injection valve unit is driven by a high-Speed hybrid Stepper motor. During the sampling sequence, the valve unit bypasses the autosampler, and connects flow from the pump to the column directly. During injection and analysis, the valve unit directs the flow through the well-plate sampler which ensures that all of the sample is injected onto the column, and that the metering unit and needle are always free from sample residue before the next sampling sequence begins. The injection valves from the G1367A/68A and the G1377A/78A have a different stator head and a different rotor seal. The volume of each valve is different.
Control of the vial/plate temperature in the thermostatted well-plate sampler is achieved using an additional Agilent 1100 Series module; the ALS thermostat.
The ALS thermostat contains Peltier-controlled heat-exchangers. A fan draws air from the area above the sample vial tray of the well-plate sampler. It is then blown through the fins of the cooling/heating module. There it is cooled or heated according the temperature setting. The thermostatted air enters the well-plate sampler through a recess underneath the special designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how mang vials are in the tray. In cooling mode condensation is generated an the cooled side of the Peltier elements. This condensed water is safely guided into a waste bottle for condensed water.
Performance Specifications Agilent 1100 Series Micro Well Plate Sampler
GLP features Early maintenance feedback (EMF), electronic records of maintenance and
errors
Communications Controller-area network (CAN). RS232C, APG-remote standard, optional
fourexternal contactclosures and BCDvial numberoutput
Safety features Leak detection and safe leak handling, low voltages in maintenance areas,
error detection and display
Injection range 0.01 8 µl in 0.01 µl increments with the small loop capillary
0.01 40 µl in 0.01 µl increments with the extended loop capillary
Precision Typically < 0.5 % RSD of peak areas from 5 40 µl,
Typically < 1 % RSD from 1 5 µl
Typically <3 % RSD from 0.2-1 µl
Sample viscosity range 0.2 5 cp
Sample capacity 2 X well-plates (MTP) + 10 X 2 ml vials
100 x 2 ml in one tray
40 x 2 ml in half tray
lnjection cycle time Typically < 30 s using following standard conditions:
Default draw speed: 4 µl/min
Default eject speed: 10 µl/min
Injection volume: 0.1 µl
Carry-over Typically < 0.05 % using the following conditions:
Column:150 x0.5 mm Hypersil ODS, 3 pm
Mobile phase: Water/Acetonitrile = 85/15
Column Flovv rate: 13 µl/min
Injection volume:1 µl caffeine (=25ng caffeine),1 µl water to test carryover
Outside wash of needle before injection: 20 sec with water using flush port
Physical Specifications - sampler (G1367A / G1377A)
Type Specification Comments
Weight 15.5 kg (34.2 Ibs)
Dimensions 200 x 345 x 440 mm
(height x width x depth) (8 x 13.5 x 17 inches)
Line voltage 100 240 VAC, ±10 % Wide-ranging capability
Line frequency 50 or 60 Hz, -±5 %
Power consumption (apparent power) 300 VA Maximum
Power consumption (active power) 200 VV Maximum
Ambient operating temperature 4 to 55 °C (41 to 131 °F)
Ambient non-operating temperature -40 to 70 °C (-4 to 158 °F)
Humidity < 95 %, at 25 to 40 °C(77 to 104 °F) Non-condensing
Operating Altitude Up to 2000 m (6500 ft)
Non-operating altitude Up to 4600 m (14950 ft) For storing the
autosampler
Safety standards: IEC, CSA, UL Installation Category II, Pollution Degree 2
Optional with G1330B Thermostat
lntroduction to the Thermostatted Autosampler
The Agilent 1100 Series autosampler is designed for use with other modules of the Agilent 1100 Series LC System, with the HP 1050 Series, or with other LC Systems if adequate remote control Inputs and Outputs are available. The autosampler is controlled from the Agilent 1100 Series control module or from the Agilent ChemStation for LC Systems.
The specially-designed thermostattable Sample trays holds Bither 100 x 1.8 ml vials or two wellplates and 10 x 1.8 ml vials.
The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial trag of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the Sample tray ensuring effective temperature control, regardless of how many vials are in the tray.
In cooling mode condensation is generated an the cooled side of the Peltier elements. This condensed water is safely guided into the leak System.
Thermostat
Weight 20.7 kg (45.6 Ibs)
Dimensions 140 x 345 x 435 mm
(height X width X depth) (5.5 x 13.5 x 17 inches)
Line voltage 100 - 120 or 220 - 240 VAC, ± 10 % Automatic selection
Line frequency 50 or 60 Hz, ± 5%
Power consumption Autosampler: 300 VA Maximum
ALS Thermostat: 260 VA Maximum
Ambient operating temperature 4. 40°C (41 - 131°C) see an page 22
Ambient nun-operating temperature -40 70 °C (-4 - 158 °C)
Humiuity < 95 %, at 25 - 40°C (77 - 104 °C) Non-condensing;
Operating Attitude Up to 2000 m (6500 ft)
Safety standards: IEC, CSA, UL, EN Installation Category II, Pollution Degree 2
Votre Labexchange-équipe sera heureux de vous aider:
Christian Schmid Laboratoire et analyse, Équipment de laboratoire, Life science
Hubert Sauter Spectroscopie, Chromatographie