Javascript est désactivé dans votre navigateur. Pour une meilleure expérience sur notre site, assurez-vous d’activer JavaScript dans votre navigateur.
Dans la plupart des cas, les équipements de laboratoire et les systèmes d’analyse sont des appareils de très haut niveau technique, avec des spécifications et des exigences qui leur sont propres. Lors de la mise en service d’un appareil de laboratoire, bien souvent des questions se posent : comment monter et régler l’appareil, comment le mettre en route.
Nous serons heureux de prendre en charge de l’installation professionnelle de vos systèmes de laboratoire!S’il vous plaît contactez-nous
Profitez de nombreux avanatges avec l’installation par nous:
24 mois garantie légale des vices cachés
60 jours Labexchange Fullguarantee
Certificat de functionnement
Le droit de retour de Labexchange
Des services de garantie optionnels apportent encore plus une année
Installation optionnelle d’équipements pour une utilisation de l’appareil immédiate et en toute sécurité
Des offres de location et leasing attrayantes ménagent votre budget
Nous serons heureux de répondre à vos questions concernant cet appareil e rappel gratuite
La durée de la garantie légale pour nos appareils est de 24 mois à partir d’arrivage.
Tous les appareils d´occasion de Labexchange seront soumis, avant la livraison, à un controle technique, et ne seront livrés que s'ils fonctionnent parfaitement. La vérification et la fonctionnalité font l'objet d'un rapport de service après-vente établi par une société de service après-vente indépendante. La Labexchange Fullquarantee est d’au moins 60 jours à partir de la date d’arrivage. Dysfonctionnements qui se produisent pendant la période de garantie seront corrigés par nous gratuitement. (Valable pour les pays de l'UE et CH)
La vérification et le bon état de marche de nos appareils est confirmé, outre par le rapport du service après-vente, également par un certificat de functionnement.
Vous êtes sur le bon chemin avec nos systèmes delaboratoire et d’analyse usagés! Pour plus de sécurité lors de l’achat, nous vous accordons le droit de retour de Labexchange. Redonez votre système de laboratoire ou d’analyse facilement sans explication.
Les conditions d’affaires spécifiques s’appliquent:Labexchange Droit de retour
(https://www.labexchange.com/fileadmin/user_upload/pdf/downloads/en/Rueckgaberecht_08_18_E.pdf)
Sur demande, nous vérifierons la possibilité d’une extension de garantie pour votre appareil. Si possible, la période de garantie est de 6 mois pour un supplément de 10% et de 1 an pour un supplément de 20% sur le prix courant. (Valable pour les pays DE, AT, CH, FR, NL, BE, LU, GB et IR)
Allez en toute sécurité! Nous sommes heureux d’offrir l’installation de votre équipement de laboratoire. Nos techniciens qualifiés installent l’appareil à votre date souhaitée dans le laboratoire, afin que vous puissiez travailler rapidement et sûrement avec votre nouvel équipement de laboratoire.
L’installation de votre équipement de laboratoire par Labexchange apporte d’autres avantages. Vous obtenez une extension de garantie à 3 mois et vous avez le droit à la Labexchange Repurchase Guarantee. Vous recevez sensibles équipements de laboratoire et des systèmes d’analyse ainsi que la plupart des hottes de laboratoire disponibles, déjà y compris l’installation.
* Champs requis
Les appareils d’occasion sont vérifiés par Labexchange Service GmbH avant la livraison. Vous recevez des appareils entièrement fonctionnels.
Les délais de livraison indiqués sont les plus rapides pour l’article en cause. Les délais de fait peuvent varier au cas par cas. Les délais de livraison définitifs sont indiqués dans la confirmation de commande.
Nous offrons des livraisons collectives par principe. Le délai de livraison s’oriente à l’article avec le délai de livraison le plus long. Une livraison partielle est possible par prix additionnel.
Courrier, agences d'expédition, autocueillette, livraison par flotte de Labexchange
Prix plus frais d’expédition. Les frais d’expédition indiqués sont à prévoir. Dérogations éventuelles sont possibles.
Si les coûts de transport ne sont pas spécifiés, s'il vous plaît demander séparément les frais de transport. En cas d’expédition dans des pays situés en dehors de l’union Européenne, des frais additionnels de 70,00€ pour l’exportation sont facturés. Remarque: Nous n'établissons pas des preuves préférentielles/EUR1. Dans le cas d’un enlèvement par vos soins/EXW de pays à l’intérieur ou à l’extérieur de la Union européenne, nous devons conserver 16% de TVA d’acheteur comme dépôt de garantie, jusqu’à ce que nous ayons reçu l’attestation de reception/la prevue de livraison.
Nous n’acceptons pas le paiement par carte de credit, lettre de credit, PayPal, etc. Dans tous les cas le montant est payable sans déduction. Jusqu’au paiement complèt l’équipement reste notre propriété. Un escompte n’est pas accordé.
Pays
Modalités de paiement possible
Remarque
DE, AT, CH
Paiement par facture, prépaiement
Paiement par facture est possible pour clients professionnels.
NL, BE, LU
Autre pays
Prépaiement
Nos conditions de vente, de livraison et de paiement sont en vigueur. Vous pouvez télécharger les documents ici.
La vente intermédiaire nous est réservée.
Tous articles sont d’occasion, sauf si explicitement défini comme « appareil neuf ».
Statut
Condition
Immédiatement disponible
Occasion
L’article a été déjà entièrement vérifié et peut être envoyé directement à vous.
L'article est en notre stock, mais doit être vérifié avant la livraison par nos techniciens Vous recevez des articles entièrement fonctionnels.
Publié
L’article est toujours au l’offreur. Nous achetons, vérifions et en fin livrons l’article après votre commande. Le certificat de fonctionnement ainsi que le rapport de service sont inclus à la livraison.
Appareil neuf
Neuf
C’est un dispositif neuf. L’article n’est pas utilisé et neuf d’usine. En ce qui concerne des article neufs, la garantie du fabricant est valable.
Modell: IC-System
Kommentar: Dokumente engl. (für Id. 14628)
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The GP40 Gradient Pump is an integral part of a DX 500 chromatography system. It is a microprocessor-based, dual-piston, variable-Speed, gradient delivery system designed to blend and pump mixtures of up to four different mobile phases at precisely controlled flow rates. The pump can deliver the selected mobile Phase composition isocratically, or as a multistep linear or curved gradient, A Digital Signal Processor (DSP) provides high Speed control of pump flow and Pressure.
The GP40 can operate as a stand-alone product or with other Dionex modules as part of a complete chromatography system. It can also be used with non-Dionex modules that meet Interface requirements for software, TTL, or relay control.
The GP40 can be controlled locally, using the front panel keypad and display, or from a remote host computer with a Dionex
DX LANTM interface installed and PeakNet software installed an the host computer. Limited remote control is also available from any device capable of providing compatible TTL signals to control the pump.
The pump's two basic modes of control, Direct control and Method control, enable it to operate with or without reference to time-based events.
Specifications
Main Power Requiremtns 85 to 270 Vac, 47163 Hz, 2.5 amps. The GP40 power supply is main voltalte auto-sensing and requires no manual adjustment.
Fuse Requirements Two 3.15 amp fast-blow 1EC 127 fuses (P/N 954745)
Operating Temperature 10 °C to 50 °C (50 °F to 104 °F)
Operating Humidity 5 to 95% relative humidity (non-condensing) Humidity
Dimensions 33.5 cm high x 22.5 cm wide x 42 cm deep (13.1 inx8.9inx 16.8 in)
6 cm clearance required in back of the module
Weight 19 kg (42 Ibs)
Display Liquid crystal with .adjustable backlighting.
Keypad 26-button pad for entering commands and numerical values for
screen parameters.
Eluent Selection Four different mobile phase components; each can be
proportioned from 0-100%
Pump Dual-piston, variable speed, 100 iaL (standard bore), 25 µL (microbore) stroke, user-selectable constant pressure or constant flow feedback control
Flow Rate Standard bore pump head: 0.04 to 10.0 mL/min, linearly variable in increments of 0.01 mL/min
Microbore pump head: 0.01 to 2.50 mL/min, linearly variable in increments of 0.01 mL/min
Operating Pressure 35 MPa (5000 psi) maximum
Pressure Resolution 0.07 MPa (10 psi)
High Pressure Limit 0 to 35 MPa (0-5000 psi) in increments of
0.05 MPa (7.25 psi); trips instantaneously
Low Pressure Limit 0. to 35 MPa (0 to 5000 psi) in increments of
0.05 MPa (7.25 psi); trips after a time-out of 0.4 mL for the standard bore GP40 or 0.1 mL for the microbore GP40
Delay Volume Approximately 0.92 mL for standard bore pump heads or 0.72 mL for microbore pump heads, measured from the proportioning valve up to, and including, the 61-cm (24-in) pressure transducer outlet line.
Methods Stores up to 100 separate gradient methods (00 through 99), each of which may contain up to 50 separate steps. The actual number of stored methods depends an available memory.
Control The keypad is used to select the pump's operating parameters and to program methods.
Storage Non-volatile memory protects against the loss of programs during Power-down or in the event of a Power failure.
Remote Limited remote operation via TTL-input logic level, and TTL-output and relay contact closures, or full remote programming and control through DX LAN interface.
Channels 4-channel membrane vacuum degas
Materials wetted materials, PEEK, PTFE
Performance >69% degas ratio @ 1 or 3 mL/min with 8.5 ppm 02 at input 0.200 Kg F/cm2 flow resistance @ 10 mL/min
LC 20 Chromatography Enclosure
The LC20 Chromatography Enclosure is an integral part of the Dionex DX 500 Chromatography Systems. It can house the following system components, which must be ordered separately or as part of another module: Separator columns, optional guard columns, SRSTM (Self-Regenerating Suppressor), DS3 Detection Stabilizer, and detector cell(s) for the ED40 Electrochemical Detector and CD20 Conductivity Detector.
The LC20 is available in two configurations, depending an the type of injection valve installed:
LC30, PEEK automated injection valve (P/N 044088)
LC30, stainless steel automated injection valve (P/N 044171)
Eluent from the gradient pump enters the Rheodyne injection valve port inside the enclosure. From the injection valve, eluent and sample flow through the guard column (if used), the separator column, the suppressor or other post-column device, and finally through the detector cells.
The LC20 may be configured for optional dual-channel operation. It will then include a second Rheodyne injection valve and component panel. There is enough tubing in the LC20 Ship Kit (P/N 046300) to plumb two systems.
The LC20 does not require Power. Internal components are operated by the GP40/IP20 pump.
Ambient 4 °C to 75 °C
Temperature: (40 °F to 167 °F)
Humidity: 5-95% relative (non-condensing)
Air Pressure: 400 to 800 KPa (60 to 120) psi for the Rheodyne injection valve and column select valve;
Use laboratory-quality air or regulated compressed air, nitrogen, or helium.
Operating Pressure 35 MPa (5000 psi) maximum liquid path (tubing, valves, columns, etc.)
Dimensions: 50 cm high x 22.5 cm wide x 49 cm deep (20.8 in x 8.9 in x 20.4 in)
Weight: 12 kg (25lbs)
Rheodyne Injection 35 MPa (5000 psi) metal-free or stainless steel rotary valve
Valve for low-volume injections.
Column Select Valve 28 MPa (4000 psi) metal-free column select valve to direct
eluent and sample to one of two columns. The column select valve option is installed at the factory but is not plumbed into the system. Tubing to plumb the LC20 for column select applications is included in the LC20 Ship Kit (P/N 046300).
Insulation
Dampening Dampens outside temperature variations by a factor of
- 5 to 10 over minutes
- 2 to 4 over 60 minutes
The CD20 is a sensitive, accurate, and versatile conductivity detector for detecting and quantifying ionic analytes in liquid and ion chromatography. It is especially useful for those analytes which lack UV chromophores and cannot be determined with adequate sensitivity by UV absorbance. This includes a wide variety of both organic and inorganic molecules; cations as well as anions. The major organic analytes are carboxylic, sulfonic, and phosphonic acids; and primary, secondary, tertiary, and quaternary amines. Inorganic analytes include strong acid anions such as the halides, sulfate, nitrate, and phosphate; alkali metal and alkaline earth cations. Conductivity detection, especially when combined with chemical eluent suppression, provides excellent sensitivity and selectivity for numerous ionic species, both organic and inorganic.
The CD20 Conductivity Detector is housed in a Dionex DX500 enclosure. The detector is designed to be stacked on top of other DX500 units to a recommended maximum height of four units.
Main Power 85 to 270 Vac, 47/63 Hz; 40 W Max, 25 W typical. The CD20 power supply is auto-sensing and no voltage adjustment is required.
Fuse Two 3.15 amp slow-blow IEC 127 fuses (P/N 954745).
Analog Output User-selectable full-scale Output of 10, 100, or 1000 mV.
Operating Temperature 4 °C to 40 °C (40 °F to 104 °F)
Operating Humidity 5 to 95% relative humidity (non-condensing)
Dimensions 22.5 cm W x 17.0 cm H x 42.0 cm D
(8.8 in W x 6.6 in H x 16.4 in D)
6 cm (2.4 in) clearance required behind detector.
Weight 8.2 kg (18 lb)
Display A Power-Up screen and seven basic User-Interface screens for method generation and controlo The CD20 Diagnostics Program adds eight diagnostic screens. The display is liquid crystal with adjustable backlighting
Keypad 26-key keypad for entering commands and numerical values for screen parameters.
Range 0.01 µS to 3000 µS, full scale
Temperature Compensation 0.0 to 3.0% per °C
Cell Drive Variable 8 kHz square wave
Local Operation Front panel controls and display status of all functions
Remote Operation All functions controlled by PeakNet software an a Computer. Connection is via the DX LAN. Control of 4 of 7 functions is possible via TTL or Relay contacts.
Cell Body PEEK
Active Volume 1.0 µL
Maximum Pressure 2.0 mPa (300 psi)
Electrodes 316 stainless steel
Suppiy Current 0, 100, 300, 500 mA @ 1.5 to 7.5 V.
Over-Voltage Alarm 8.5 V
Over-Temperature Alarm 40 °C
Operating Temperature 25 °C to 40 °C (50 °F to 104 °F)
Warm-up Time 10 minutes (typical)
Under/Over Temperature Not Ready message displayed when not at set temperature
Alarms
The AD20 Absorbance Detector is a dual-beam, variable wavelength photometer. Full spectral capability is provided by two light sources: a deuterium lamp for ultraviolet detection and a tungsten lamp for visible wavelength operation. The AD20 features programmable wavelength selection and automatic calibration for precision, reproducibility, and ease-of use. The AD20 is designed for use with a variety of standard bore and microbore flow cells.
The AD20 can be controlled locally from the front panel, or from a remote host computer via the optional Dionex DX LAN interface and PeakNet Software.
Main Power 90 to 265 Vac, 47/63 Hz; 150 W Max, 100 W typical. The power supply is auto-sensing and requires no voltage adjustment.
Fuse Two 3.15 amp fast-blow IEC127 fuses (1)/N 954745)
Analog Output User-selectable full-scale output of 10, 100, or 1000 mV
Operating Temperature 10 °C to 40 °C (50 °F to 104 °F)
Dimensions 22.5 cm W x 33.5 cm H x 42.0 cm D
(8.8 in W x 13.1 in H x 16.4 in D)
6 cm (2.4 in) clearance required behind the detector
Weight 13.6 kg (30 lbs)
Display Liquid crystal display with adjustable backlighting
Keypad 26 buttons for entering commands and numerical values for screen parameters
Optical System Dual-beam, fiber-optic beamsplitter and concave holographic diffraction grating
Light Sources Deuterium lamp (30 W) for ultraviolet spectrum analysis; tungsten lamp (10 W) for visible spectrum analysis
Wavelength Range 190 to 800 nm variable; continuous in 1 nm steps
Wavelength Accuracy ± 1 nm
Bandwidth 8 nm
Absorbance Discrete settings of 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1,
Range 0.2, 0.5, 1.0, and 2.0 AU
Autozero Capability 2 AU
Autozero Accuracy ± 100 µAU
Noise < 10 µAU peak-to-peak at 254 nm, 2-second rise time, flowing deionized water
Drift < 100 µAU/hour (after warm-up)
< 100 µAUPC (alter warm-up)
Filter Rise Time Discrete settings of 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, or 10.0 seconds
Analog Output Range Discrete settings of 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.0, and 2.0 AUFS
Remote Operation Four of the seven AD20 functions can be controlled via TTL or Relay contacts
DX LAN Operation All functions controlled by PeakNet Software an a PC, when
(Optional) connected to the AD20 via the Dionex DX LAN interface.
Volume and Optical Path Standard bore Gell, used with 4 mm (0.016 in) columns: 9 µL
Length volume, 10 mm (0.002 in) optical path length
Narrow bore cell, used with 4 mm (0.016 in) and 2 mm (0.008 in) columns: 7.5 µL volume, 6 mm (0.002 in) optical path length
Microbore cell, used with 2 mm (0.008 in) columns: 2.5 µL volume, 3 mm (0.01 in) optical path length
Maximum Operating 1.38 mPa (200 psi) with a heat exchanger; 3.45 mPa (500 psi)
Pressure without a heat exchanger
Chemical Compatibility The use of a base stronger than 0.1 M is not recommended, as
it will etch the silica windows.
Coil for 2 mm Columns Volume of 20 µL; dispersion of 2.2 µL at 1.0 mL/min
Coil for 4 mm Columns Volume of 60 µL; dispersion of 5.3 µL at 1.0 mL/min
Votre Labexchange-équipe sera heureux de vous aider:
Christian Schmid Laboratoire et analyse, Équipment de laboratoire, Life science
Hubert Sauter Spectroscopie, Chromatographie