Zeiss Refraktometer
Objektnummer | B00007011 |
---|---|
ID-number | 007011 |
Object name | Zeiss Refraktometer |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Abbe-Refraktometer
1 Einstellfernrohr
2 Justierschraube
3 Teilkreis für Dispersionsmessung
4 Rändelknopf für Kompensator
5 Überwurfring für Thermometer
6 Thermometer
7 Prismenkörper
8 Griff zum öffnen des Prismenkörpers
9 Beleuchtungsspiegel für Messprisma
10 Triebknopf für Prismendrehung
11 Beleuchtungsspiegel für Skale
12 Ablesemikroskop
Messprinzip
Mit dem Abbe-Refraktometer wird der Grenzwinkel der Totalreflexion gemessen, wobei zwei mögliche Meßmethoden zu unterscheiden sind: die Messung im durchfallenden Licht bei streifendem Einfall und die Messung im reflektierten Licht bei Totalreflexion. An der Messskale wird in jedem Falle die Brechzahl bzw. der Zuckergehalt angezeigt.
Messung im durchfallenden Licht
Bei der Messung im durchfallenden Licht tritt das Licht durch die Probe hindurch auf die Messfläche des Messprismas. Der streifend einfallende Lichtanteil wird
unter dem Grenzwinkel der Totalreflexion gebrochen und im Fernrohr als Grenzlinie zwischen Hell- und Dunkelfeld beobachtet. Sie lässt sich durch Drehen des Messprismas auf ein Strichkreuz einstellen, und an einem Teilkreis kann die Brechzahl abgelesen werden.
Den streifenden Einfall in das Messprisma erreicht man bei der Messung im durchfallenden Licht auf zwei Arten. Entweder benutzt man ein Beleuchtungsprisma, dessen mattierte Grundfläche das Licht in allen Richtungen - also auch streifend - auf die Messfläche auftreffen lässt. Oder man lässt das Licht ohne Beleuchtungsprisma streifend auf die Messfläche fallen. Diese Anordnung ermöglicht zusätzlich die Messung fester Stoffe.
Messung im reflektierten Licht
Bei der Messung im reflektierten Licht tritt das Licht direkt in das Messprisma ein. An der Berührungsfläche von Messprisma und Probe wird ein Teil des Lichtes total reflektiert und zeigt sich im Fernrohr als Hellfeld. Der Kontrast zwischen Hell- und Dunkelfeld ist bei der Messung im reflektierten Licht nicht so kräftig wie bei durchfallendem Licht, da das Dunkelfeld durch partiell reflektiertes Licht aufgehellt wird. Außerdem ist zu beachten, dass gegenüber der Messung im durchfallenden Licht Hell- und Dunkelfeld ihre Lage vertauscht haben.
Dispersionsmessungen
Da die Brechzahl von der Wellenlänge (Farbe) abhängig ist, besitzt die Grenzlinie im allgemeinen einen Farbsaum. Diesen beseitigt man mit Hilfe eines sogenannten Amici-Prismenpaares, das eine bestimmte maximale Dispersion besitzt, aber für gelbes Natriumlicht geradsichtig ist. Beide Prismen können gleichzeitig gegenläufig um die optische Achse gedreht werden und ermöglichen damit eine kontinuierlich einstellbare Kompensation der Dispersion der Probe. Die Kompensatorstellung kann an der Teilung als Trommelzahl abgelesen und in Dispersionswerte umgerechnet werden.
Daten |
|
|
|
|
|
|
Skalen- |
|
Messbereich |
Fehlergrenze |
teilung |
Brechzahl nD |
1,300...1,700 |
1 ...2 × 10 -4 |
0,001 |
Zucker (Trocken |
|
|
|
substanz, |
|
|
|
%= g/100 g = °Brix) |
0 ... 95% |
0,1 ... 0,2% |
bis 50 % |
|
|
|
in 0,5 % |
|
|
|
über 50 % |
|
|
|
in 0,2 % |
mittlere Dispersion |
|
|
0,0005 im |
u F . nC |
0 ... 0,060 |
1 ... 2 × 10 -4 |
Nomogramm |
Abbesche Zahl |
5...500 |
- |
- |
Temperatur |
0 ... 75 °C |
|
1 grd |
Normal-Prisma |
|
|
|
Substanzbedarf je |
|
|
|
Messung |
|
0,05 ml |
|
Durchflussprisma: |
|
|
|
Größter Querschnitt |
des |
|
|
Durchflussraumes |
|
2,5 mm 2 |
|
Volumen des Durchflussraumes |
0,2 ml |
|