Back to Top
Archive
Watson Marlow 620DI/R
Description:
Watson Marlow Peristaltic Pump 620DI/R. 1-channel-Pumphead. Max 265 rpm. NEW!
siehe Storeview
| Objektnummer | B00011195 |
|---|---|
| ID-number | 011195 |
| Object name | Watson Marlow 620DI/R |
| Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Watson Marlow
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Keypad entry of flow from 0.001 litre/min to 18 litre/min
Dispenses 500m1 to within +/- 0.5% in 3 seconds
Stores up to 50 dispensing programs
4 bar pressure with LoadSure Tm elements (STA-PURE, Bioprene TM or Marprene TM)
2650:1 control ratio (0.1 to 265rpm speed range)
Digital speed adjustment with choice of O.lrpm, 0.5rpm, lrpm, 2rpm, 5rpm and lOrpm step changes
Maintenance-free brushless DC motor
Smooth easy-to-clean enclosure free from bug traps
Wireless pumphead track switching
Compatible with Mk 11 620R, 620RE and 620RE4 pumpheads only (not 620L and 620LG - nee separate datasheet)
Two pumphead positions as standard (inlet/outlet ports an the hght or facing downwards)
Retractable pumphead rollers for CIP, SIP and easy tube loading
|
Functionality |
620Di |
620DIN |
|
Enclosure - ingress protection rating |
IP31 |
1P66 |
|
Manual control |
|
|
|
Digital speed control with simple calibration to display flow |
|
|
|
Choice of flow rate display; metric or imperial units |
|
|
|
Numeric keypad for entry of speed, flow or PIN code |
|
|
|
Remote control |
|
|
|
Run/stop, direction change, auto/manual mode, leck detector input (via contact closure or 5V TTL to 24V industrial logic) |
|
|
|
Remote Operation of dosinq (foot/handswitch or logic input) |
|
|
|
Four programmable digital status Outputs through 5V TTL to 24V industrial logic |
|
|
|
Analogue speed feedback |
|
|
|
Tachometer Output; 0-1478Hz |
|
|
|
Digital communication |
|
|
|
Digital network serial control |
RS232 |
RS485 |
|
Specialist dispensing functionality |
|
|
|
Drip control feature(momentary direction reverse at end of dose) |
|
|
|
Ramp control to improve accuracy and avoid splashing or frothinq |
|
|
|
Export of batch records to PC or printer for cGMP requirements |
RS232 |
|
|
Dual operator/supervisor PIN code protection of pump settings |
|
|
|
620R dose sizes |
||||
|
Tube bore |
6.4mm 1/4" |
9.6mm 3/8" |
12.7mm 1/2" |
15.9mm 5/8" |
|
Minimum possible dose |
6ml |
14ml |
21 ml |
28ml |
|
Minimum recommended |
60ml |
136ml |
208ml |
283ml |
|
620RE dose sizes |
||
|
Tube bore |
12mm |
17mm |
|
Minimum possible dose |
19ml |
30ml |
|
Minimum recommended |
189ml |
302ml |
|
620RE4 dose sizes |
||
|
Tube bore |
12mm |
17mm |
|
Minimum possible dose |
16ml |
21ml |
|
Minimum recommended |
164ml |
208ml |
|
Flow ranges (I/min) |
Continuous tubing |
|||
|
(over 0.1 to 265rpm speed range) |
620R (2 rollers) |
|||
|
Tubing material |
6.4mm |
9.6mm |
12.7mm |
15.9mm |
|
Marprene TM, Bioprene TM |
|
|
|
|
|
Marprene TL, Bioprene TL |
0.001-3.4 |
0.003-6.6 |
0.004-11 |
0.01-12 |
|
Pumpsil silicone |
0.001-3.2 |
0.003-7.2 |
0.004-11 |
0.01-15 |
|
STA-PURE, Neoprene |
0.001-3.2 |
0.003-6.6 |
0.004-11 |
0.01-16 |
|
Flow rangen (I/min) |
LoadSure TM element tubing |
|||
|
Cover0.1 to 265rpm speed range) |
620RE (2 rollers) |
620 RE4 (4 rollers) |
||
|
Tubing material |
12mm |
17mm |
12mm |
17mm |
|
Marprene TM, Bioprene TM |
0.004-9.8 |
0.01-16 |
0.003-8.3 |
0.004-11 |
|
Marprene TL, Bioprene TL |
0.004-9.8 |
0.01-18 |
0.003-8.3 |
0.005-12 |
|
Pumpsil silicone |
0.004-10 |
0.01-16 |
0.003-8.7 |
0.004-11 |
|
STA-PURE, Neoprene |
0.004-11 |
0.01-18 |
0.003-9.0 |
0.010-13 |
|
Technical Specification |
||
|
|
620Di |
620DiN |
|
Ingress rating |
IP31 / NEMA 2 |
1P66 / NEMA 4X |
|
Enclosure |
Wipedown, vented |
Watertight, dustproof |
|
Suitability |
Dry industrial environments with non-corrosive atmospheres |
Corrosion resistant for heavy industrial environments |
|
Humidity |
(Non-condensing) 80% to 31 C, 8817, decreasinq linearly to 50% at 4OC, 104F |
(Condensing) 10-100% RH |
|
Temperature |
5C to 40C (40F to 104F) |
5C to 40C (40F to 104F) |
|
Pump weight |
19.6kg (431b 3oz) with 620R, 620RE20.1 kq (441b 5oz) with 620RE4 |
20.5kg (451b 3oz) with 620R, 620RE 21.Okq (461b 5oz) with 620RE4 |
|
Control ratio |
2650:1 |
2650:1 |
|
Power/Torque |
250VA consumption/6Nm, torque rating |
250VA consumption/ 6Nm, torque rating |
|
Noise |
< 70dB(A) at 1 m |
< 70dB(A) at 1 m |
|
Standards |
CE, cETLus |
CE, cETLus |
|
Power supply |
100-1 20V/200-24OV, 1 ph, 50/60Hz |
100-1 20V/200-24OV, 1 ph, 50/60Hz |
|
Component |
Material |
|
Keypad |
Polyester |
|
Switch-plate |
ABS PA-765 |
|
Rear blanking plate |
Stainless steel 316 |
|
Drive casework |
Pressure die-cast aluminium (top - LM6, base - LM24) |
|
Case work coating |
Alocrom pre-treatment, exterior grade polyester powder coat |
|
Drive shaft |
Stainless steel 440C |
|
Pumphead Crack |
Powder coated aluminium LM24 |
|
Guard - inner/outer |
Grilamid TR55/Polyurethane PBA Fortron 1140L4 (PPS) |
|
Rotor hub, roller arms |
|
|
Rotor cover |
Dupont Hytrel G5544 |
|
Rollers - main/quide |
Stainless steel 303/Nylatron |
|
Main roller bearings |
Carbon steel |
|
Tube clamp sets |
Polypropylene |
Product group: Hose pumps / peristaltic pumps
Questions?
Your Labexchange-Team will gladly help:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
