The refurbished Waters NanoAcquity UPLC system with Waters ACQUITY 2996 PDA includes the following components:. - Waters Acquity 2996 PDA with Nano Scale Flow Cell installed. - Waters NanoAcquity binary solvent manager. - Waters NanoAcquity sample manager with column oven attached. - Waters sample container. - Essential cables for complete operation. Maximum resolution:. - Optimized system to utilize 1.7 µm BEH particle technology to achieve the highest possible peak capacity for complex mixtures. Maximum reproducibility:. - Direct nanoflow control and a novel, movable heating and capture element for a standard deviation of repeatability of <0.25 minutes from run to run, even on long gradients. Maximum throughput:. - BEH technology columns enable faster gradient separations for simple mixtures or in targeted analyzes without compromising resolution. Robustness:. - Nano-scale columns and connectors (PEEK, 1/32" stainless steel and gold plating) ensure reliable operation up to 10,000 psi, with a novel pressure arrester. Ease of use:. - Direct gradient control allows for minimized hose connections and simplified loading and trapping procedures. Advanced diagnostics on board:. - Monitor system performance efficiently. Combination with any MS:. - The NanoAcquity UPLC system can be controlled by your Waters, Thermo Fisher Scientific or ABI/MDS SCIEX mass spectrometer software platforms. Compatibility with UPLC and HPLC:. - Compatible with a wide range of conventional nano-scale columns with a flow range of 200 nL/min to 100 µL/min. Acquity 2996 PDA Specifications:. - Wavelength range: 190 to 800 nm. - Light source: Pre-aligned deuterium lamp. - Spectral Resolution/Optical Bandpass: 1.2 nm per photodiode with a total of 512 photodiodes, digital and optical (3D mode). - Digital resolution: 1.2nm - 600nm (2D mode). - Wavelength accuracy: ±1 nm. - Linearity range: 5% at 2.0 AU, propylparaben, at 256 nm. - Spectral resolution: 1.2 nm. - Baseline noise: ±1.5 × 10–5 AU peak-to-peak, dry , at 254 nm. - Drift: 1 × 10–3 AU/hour at 254 nm (after warm-up time) ?T ? 1°C per hour. - Operating temperature: 4 to 40°C. - Relative humidity: 20 to 80%, non-condensing. - Power supply: Ground, 100 to 240 Vac. - Power requirements: 100-230 VAC. - Frequency range: 50 to 60 Hz. - Slice thickness: 10 mm (standard analysis cell). - Cell volume: 8 µl (standard analysis cell). - Pressure limit: 1000 psi (standard analysis cell). - Wetted materials: 316 stainless steel, fused silica Tefzel. - Dimensions (W x D x H): 29 cm x 61 cm x 22 cm. - Weight: 14.3kg. The Waters NanoAcquity UPLC with ACQUITY 2996 PDA is in good condition. We specialize in analytical devices. Labprocure is responsible for this device.