Waters HPLC
Objektnummer | B00013104 |
---|---|
ID-number | 013104 |
Object name | Waters HPLC |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
The system consists of differenet modules:
Waters 712 WISP
The 712 WISP combines precision and reliability to offer you an autosampler with exceptional value and versatility. As a standalone module, the 712 WISP provides more capabilities than other autoinjectors in its price range. Used in a Waters Powerline HPLC System (or a Waters data controlled system) it gives you added automation and enhanced documentation of system information.
The 712 allows you to program an entire carousel of samples with easy-to-use individual vial programming features:
LED display: Confirm injection parameters of set-up or during run. Injection volume: Program individual vials from 1 µl to 2000µl in 1 µl increments. Sample number: Go directly to specified sample for stat operation or to change any individual sample parameters.
Analysis time: Select sample analysis times from 1 minute to 9 hours, 59 minutes, in 1 minute increments.
Number of injections per vial: Program each sample for 1 to 9 injections. Equilibration delay: Program injection times from 1 minute to 9 hours, 59 minutes in 1 minute increments, for column reequilibration, automatic methods switching or integrator delay (useful during gradient elution chromatography).
System command: Program special routines such as standard/sample, syringe overdrawn, auto purge. Also communicates system or program errors to maximize productivity.
Specifications/Features
|
712 WISP |
Typical Precision |
< 1.0% RSD |
Linearity (1-100µl) |
> 0.99 |
Carryover |
< 0.1% |
Sample Waste (per inj.) |
None |
Minimum sample required (for 1µl inj.) |
7µls |
Random Access Programming |
No |
Injection Range |
1-2000µls |
Replicate Injections (per vial) |
1-9 |
Front Panel Control |
Yes |
Display Type |
Multisegment LED's |
Sample Carousel(s) |
4ml - 48 vial 1 ml - 96 vial |
External Event Contact |
|
Closures |
4 |
Non-Programmable |
4 |
Programmable |
0 |
Communications |
|
Output |
BCD |
Input/Output |
INTELINK, IEEE-488 |
Sample Compartment |
|
Temperature Control |
4°C-Ambient |
Advanced Sampling Routines |
|
Priority Samples |
No |
Auto Standards |
Yes |
Auto Addition |
No |
Auto Transfer |
No |
Advanced Sample Preparation |
|
Capabilities |
|
Filtration |
No |
Solid Phase Extraction |
No |
Serial Dilution |
No |
Mixing |
No |
Liquid/Liquid Extraction |
No |
Evaporation |
No |
Trace Enrichment |
No |
Power Requirement |
110-220V; 50-60Hz 35psi air |
Waters 510 HPLC Pump
Precise, reliable performance with Waters 510 HPLC Pump
The Waters 510 Pump is a high-precision HPLC pump that combines the most important aspects of performance-high precision, reliability, smooth solvent delivery, and proven performance. The 510 is the industry standard for microbore to semipreparative chromatography. The simple yet dependable design consists of dual reciprocating pistons driven by stepper-motor controlled, noncircular gears for smooth, precise delivery.
Dependable design ensures accuracy
The 510's standard flow range of 0.1 to 9.9 ml/min can be externally controlled down to 0.001 ml/min. and can operate in fully-automated isocratic mode, gradient mode, or flow programming mode. The 510's compressibility compensation circuitry automatically adjusts the motor's speed in response to changes in operating pressure, guaranteeing accurate flow delivery under all operating conditions and with all mobile phases.
The 6000 psig operating pressure lets you take advantage of the speed and efficiency of all microparticulate columns. An automatic high pressure shut off mechanism protects your columns. The mechanically activated outlet check valve and real design gives greater reliability under any operating conditions, even when using volatile solvents such as hexane und methylene chloride. Advanced seal material and mechanical design aid in precise solvent delivery und significantly extend the life of the pump. A Plunger Wash Kit is also available to extend the life of the seals when performing buffered mobile phase applications.
Drive: Positive gear drive with precision stepper-motor (12 steps/µl)
Flow Rate: 0.1 to 9.9 ml/min
with 680 Autornatic Gradient Controller 0.01 to 10.0 ml/min
with Micro Flow Control Module 0.001 to 9.9 ml/min
with 510 EF (Extended Flow) 0.22 to 22.5 ml/min
Flow Rate Precision: ±0.1 % of setting
Flow Rate Accuracy: ±1.0% of setting or 0.005 ml/min
Maximum Pressure Limit: 6000 psig (410 bars)
Pressure Meter Range: 0 to 6000 psig (0 to 410 bars)
Overpressure Limits: Continuously adjustable between 100 and 6000 psig (7 and 410 bars)
Piston Displacement Volume: 100 µI each piston (225 µI for extended flow version)
Waters CHM
Temperature Control Module Column Heater Module: Part number WATO38039
Waters TM programmable Ternperature Control System is a microprocessor controlled heating unit that maintains precise, consistent temperatures of up to four HPLC columns from ambient to 150°C (with control to a tenth of a degree). |
MANTENANCE PARTS AND SUPPLIES
Item Description Part Quantity/
Number Package
1 Inlet Tubing Assembly WAT038159 1
2 Fuses, 2.5 Amp, 115 V WAT072919 1
3 Fuses, 1.0 Amp, 115 V WAT005064 5
4 Rubber Gasket WAT038075 1
5 TCM Operator's Manual WAT038003 1
INSTRUMENT ACCESSORIES
6 Column Heater Insert, 4 mm x 10 cm WAT038120 1
7 Column Heater Insert, 4 mm x 15 cm WAT038121 1
8 Column Heater Insert, 4 mm x 25 cm WAT038122 1
9 Column Heater Insert, 4 mm x 30 cm WAT038123 1
10 Column Heater Insert, 8 mm x 25 cm WAT038124 1
11 Column Heater Insert, 8 mm x 30 cm WAT038125 1
12 Column Heater Insert, 7 mm x 30 cm WAT038126 1
13 Thin Wall C.H,I., 3.9 mm x 7.5 cm WAT019885 1
14 Thin Wall C.H.I., 3,9 mm x 15 cm WAT019886 1
15 Thin Wall C.H.I., 3.9 mm x 30 cm WAT019887 1
16 Cable, Extension, 10 ft WAT038131 1
Instrument repair parts are used by and are available only through Millipore Service. They are not listed in this catalog. The use of such parts usually requires the expertise of an authorized service and support representative to ensure maximum success.
If you fest you require parts not listed in this catalog, please contoct your local Millipore office for technicol assistance. The telephone number is listed in the back of this catalog.
Conductivity Detedtor 431
Data Module 746