VWR-Hitachi LaChrom
Objektnummer | B00020149 |
---|---|
ID-number | 020149 |
Object name | VWR-Hitachi LaChrom |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
model : LaChrom
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Merck Solvent Degasser L-7612
Conforms to EC Low Voltacre Standard 73123/EC
Technical Data
Voltage: 220 Volt/50 Hz
Tolerable voltalte range: +/- 10%
Power consumption: 50 watts
Material in contact with liquid: Teflon, PEEK and tefzel (fitting/ferrule)
Degassing channels: 4
Optimal fiow : 0.1- 3.0 ml/min. per channel
Dead volume per channel: 8 ml (+/- 10%)
Membrane surface area: approx. 250 cm2
Liquid connections: 1/4-28"
Weight: 3.8 kg
Dimensions: 160 (h) x 80 (w) x 320 (d) rnm
Model L-7400 UV Detector
Specifications
Optical system Double beam
Light source D 2 lamp
Measuring wavelength range 190 to 600 nm, 195 nm or higher recommended for measurement, 200 nm or higher recommended for
spectral acquisition
Filter (UV32) inserted in optical path for measurement at 361 nm or higher
Wavelength setting method Setting by keyboard or by communication (D-line)
Wavelength accuracy ±1 nm
Bandpass 10 nm
Digital output range -4 x 10 1 to 1.1 X 10 6 counts
1 AU, 2 AU, 4 AU output as 10 6 counts according to setting (Max.: Approx. 2.5 AU)
Time constant Selectable in 5 steps of
approx. 0.1, 0.5, 2.0, 4.0, 8.0 sec
Noise 0.8 X 10 -5 AU or less
(Conditions: wavelength
250 nm, air in cell, response approx. 2 sec)
Drift 2 X 10 -4 AU/hr or less
(Conditions: wavelength
250 nm, air in cell, constant temperature stable operating state)
Auto zero Zero adjusting range -0.3 to 2 AU
Offset 0 to 2 AU, settable in 0.001 steps
Spectrum memory
a ) Memorized contents Absorbance spectra
b) No. of spectra memorized Absorbance spectra ... . 7
Background spectrum... 1
Time program
No. of programs 9
Settable time Up to 600 minutes in 0.1 min steps
No. of steps memorized Total of 100 steps for 9 files
Program contents Measuring wavelengths, baseline processing
Specified time program is retained by battery backup when power is turned off.
Instrument condition setting Recorder range, offset value.
Specified conditions are retained by battery backup when power is turned off.
Communication function D-line
Flow cell Quartz cell (optical path length 10 mm)
Operating temperature range 4 to 35°C (non-condensing)
Operating humidity range 45 to 85%
Power supply 100 to 240 V,
50/60 Hz
Power consumption Approx. 150 VA
Dimensions 260(W) X 500(D) x 150(H) mm
Weight Approx. 14 kg
Others The following functions are available for analog input/ output.
a) Processor output 1 V full scale; 1 AU, 2 AU, 4 AU output as 1 V according to setting
(Max.: Approx. 2.5 AU)
b) Recorder output 10 mV full scale; full scale range 0.001 to 2.500 settable in 0.001 steps.
c) Lamp off input Lamp extinction
d) Marker input Marker of about 0.6 mV (6 divisions on recorder
chart ) is output onto recorder signal
e) Auto zero input Zero adjusting range -0.3 to 2 AU
Model L-7200 Autosampler
Specifications
Number of standard samples 80
The vial number setting range is from 1 to 200
Rack/sample vials:
Conditions can be set to accommodate a variety of sample vials and racks
Syringe capacity 0.5 mL (standard syringe)
Sample injection volume 0.5 µt to 400 µL (standard loop: 100 µl)
Syringe speed 5 speeds can be chosen by the analyst
Sample injection method:
Syringe measurement cut injection
Syringe measurement all volume injection
Full loop measurement injection
Pressure resistance 34 MPa (350 kgf/cm 2 )
Materials of wetted parts Stainless steel (SUS316), fluororesin , borosilicate glass, Vespel * (injection valve rotor seal), PEEK** (syringe valve rotor seal), EPDM; ethylene-propylene rubber*** (waste tube), pofypropylene (drain pan)
* Not usable for other than pH1 to pH13.
** Not usable for concentrated sulphuric acid, concentrated nitric acid, tetrahydrofuran
(THF), and methylene chloride
*** Not usable for benzene, hexane, toluene, xylene , chloroform, tetrahydrofuran,
hydrochloric acid, nitric acid, etc.
pH range pH1 to 13
Display LCD with back light (40 characters x 2 lines)
Control system : Sequential injection function for LC
Vial detecting function : Provided
Data storage
:
Number of injections
per sample Up to 99 times
Analysis time 999.9 rninutes
External communication
function D-Line communication
GLP function
Error detection Abnormality in operation of the
system is detectable.
Maintenance logbook After part replacement, the number of injections is
recorded . The count can be reset to zero after certain parts (e.g. injection port seal) have been replaced.
Ambient temperature 4 to 35°C
Ambient humidity 45 to 85%
Power requirement 100 - 240 V AC ± 10%, 50160 Hz
Power consumption Approx. 85 VA
Installation category Category II in 1E01010-1
annex J
Dimensions 260(W) x 500(D) x 235(H) mm (excluding protrusions)
Weight Approx. 19 kg
Model L-7100 Pump
Specifications
Pump Unit
Liquid Feed system:
Dual plunger type reciprocating pump, series connection
Maximum discharge pressure:
39.2 MPa (400 kgf/cm 2 )
Discharge rate range:
0.001to 9.999 mL /min
Pressure limit range:
0 to 41.2 MPa
Discharge volume of plunger no. 1:
100 µL/stroke
Flow rate setting accuracy (at constant room temperature of 20°C for distilled water):
- ±2 µL/min (0.01 to 0.1 mL /min, 1.0 to 39.2 MPa )
- ±2% (0.101 to 5 mL /min, 1.0 to 39.2 MPa )
- ±2% (5.001 to 9.999 mL /min, 1.0 to 2.0 MPa )
- +2% to -1p*% of discharge pressure
(5.001 to 9.999 mL /min, 2.1 to 39.2 MPa )
*p .. Pump pressure ( MPa )
Flow rate stability:
0.2% RSD or less (retention time at flow rate 1 mL /min, at constant room temperature of 20°C for distilled water)
Compensation of solvent compression ratio and elimination of pulsation:
High-speed feedback real-time control
Pressure display accuracy:
±5%
Constant pressure liquid feed:
2.0 to 39.2 MPa (20 to 400 kgf/cm² )
(Flow rate range: 0 to 5 mL /min)
Material of wetted parts:
SUS 316, ruby, sapphire, ceramic, PTFE carbon-impregnated PTFE
Display data:
Parameters
Pump monitor Flow rate, pressure
Gradient monitor Elapsed time, mixing ratio, flow rate, pressure, timer value, etc.
Pump control mode:
- Single-liquid delivery mode
- Low pressure gradient mode
- High pressure gradient mode
Contact input/output terminals:
Event timer: 4 channels
External communication:
D-line
(a) D-line communication mode (
(b) D-line contact mode (D-line OFF)
OUTPUT PUSY/READY
INPUT 1) GRADIENT START
2) EMERGENCCY STOP
Specification of pressure unit:
MPa , kgf/cm², bar, psi
Pressure zero adjustment:
Possible
Ambient temperature:
4 to 35°C (condensation unallowable)
Humidity:
45 to 85% RH
Power supply:
100 to 240 V AC ± 10%
Power frequency:
50/60 Hz
Power consumption:
About 100 VA
Dimensions:
260 (W) X 500 (D) x 150 (H) mm
Weight:
About 14 kg
Installation Category: II (by IEC1010-1 Annex J)
Low Pressure Gradient System
Number of mobile phase Up to 4
Mixing Valve opening/closing time control
Mixing ratio range 0 to 100% (in increments of 1%)
Flow rate setting range 0.001 to 9.999 mL /min (in increments of 0.001 mL /min)
Recommended flow rate range 0.1 to 9.999 mL /min (If the flow rate exceeds 2.0
mL /min , it is recommended to use the optional mixer.)
Gradient Blution profile Linear/multi-step
Number of programming steps 92 steps max. per program
100 steps max ./ 9 programs
Programming time Up to 600 min (in increments of 0.1 min)
Programming items - B/C/D mixing ratio
- Flow rate
- Event Signal output
- Pump stop, buzzer
Number of programs 9
High Pressure Gradient System
Number of mobile phase Up to 3
Mixing Double or triple pump flow rate control
Mixing ratio range 0.0 to 100.0% (in increments of 0.1%)
Flow rate setting range 0.001 to 9.999 mL /min (in increments of 0.001 mL /min)
Recommended flow rate range 0.1 to 9.999 mL /min
Gradient elution profile Linear/multi-step
Number of programming steps 92 steps max. per program
100 steps max. /9 programs
Programming time Up to 600 min (in increments of 0.1 min)
Programming items - B/C mixing ratio
- Flow rate
- Event Signal output
- Pump stop, buzzer
Number of programs : 9
D-7000 Interface Module
D-7000 IFM
Enclosure
The D-7000 IFM enclosure has the following physical characteristics:
Dimensions 260 min x 500 mm x 50 mm (W x L x H)
Weight 6 kg
Power Supply 25 VA
CPU Board
CPU 68340 (16 MHz)
ROM 256K
RAM 1.0 MB
I/0 RAM 256K
A/D Converter
Dynamic Range 21 bits
Resolution 0.25 microvolts per count
Minimum A/D Speed 12.5 msec .