The Varian CP-3800 GC system is equipped with the following components:. * Thermionic Specific Detector (TSD). * Flame ionization detector (FID). * CTC Combi Pal. * PC with appropriate software and all necessary cables for complete operation. All components are in excellent condition. We have special expertise in the area of analytical devices. Specifications:. Measures and weight:. - Size: 53cm (H) x 66cm (W) x 56cm (D). - Weight: 43kg. Environmental conditions:. - Operating temperatures: 10°C to 40°C. - Relative operating humidity: 5% to 95%. - Mains voltage requirements: 101V, 120V, 230V (±10% nominal). Column oven:. - Dimensions: 28cm (W) x 20cm (D) x 28cm (H). - Temperature range: Ambient temperature +4 °C to 450 °C. - With liquid N2: -99°C to 450°C. - With liquid CO2: -65°C to 450°C. - Temperature program increases/holding points: 7/8. - Maximum temperature increase rate: 100 °C/min for all voltages. - Cooling rate: from 400°C to 50°C in 4.5 minutes. - Resolution of the temperature setpoint setting: 1 °C. Injector options:. - Maximum number of injectors: Three working at the same time. - Pneumatics: Manual or Electronic Flow Control (EFC). - Columns: Standard with capillary columns and optional adapter for packed columns. Injectors:. - CP-1177 Split/Splitless. - 1079 Programmable Temperature Vaporizing (PTV). - 1061 Flash Megabore/Packed. - 1041 On-Column Megabore/Packed. CP-1177 Split/Splitless:. - Pressure range: 0-100 psi. - Total flow: 500 mL/min at 10 psi. - Maximum temperature: 450°C. - Split range: 1-10. 000 (depending on the column). 1079 Programmable Temperature Vaporizing (PTV):. - Pressure range: 0-100 psi. - Total flow: 500 mL/min at 10 psi. - Temperature range:. -99°C to 450°C with liquid N2. -65°C to 450°C with liquid CO2. - Maximum temperature increase rate: 180 °C/min. - Temperature increases: 4. - Split range: 1-10. 000 (depending on the column). - Operating modes:. - Temperature controlled splitless. - Cold-on-column. - Large volume injection. - Split and splitless. - ChromatoProbe solid sample introduction: optional. 1061 Flash Megabore/Packed:. - Pressure range: 0-100 psi. - Total flow: 50 mL/min (Type 3 EFC) or 500 mL/min (Type 4 EFC). - Maximum temperature: 450°C. 1041 On-Column Megabore/Packed:. - Pressure range: 0-100 psi. - Total flow: 50 mL/min (Type 3 EFC) or 500 mL/min (Type 4 EFC). - Maximum temperature: 450°C. FID:. - Maximum temperature: 450°C. - Detectiveness: 2 pg C/sec. - Linear dynamic range: 10^7. - Patented ceramic flame tip: standard. - Flame Failure Detection/Auto Re-Ignition: Standard. TSD:. - Maximum temperature: 450°C. - Detectiveness:. N: 100 fg N/sec (azobenzene). P: 100 fg P/sec (malathion). - Linear dynamic range:. N: 10^5. P: 10^4. - Self-aligning bead design: standard. Combi PAL autosampler:. - Sample trays: Two standard and expandable to four. - Tray types: 98 x 2 mL vials; 200 x 1mL vials; 32 x 10mL/20mL vials; and 96-well plates. - Dual and double mode: Standard. - Internal standard: Standard. - Operating modes: liquid, standard; heated headspace, optional; and SPME, optional. - Sample heating and cooling: Standard. - Optional modules: additional sample trays, microplate holder, wash station, SPME fiber anneal station, diluent, barcode reader and flow cell Labprocure is responsible for this device.